[Fri Oct  7 19:54:40 2011] Detection parameters:
  Position = (369.5, 603.2) = 17 25 57.30 -34 18 50.8
  Extent = 2.1" x 1.5", rotation angle = 99 degrees
  Source counts = 92.4 +/- 10.3
  Background counts = 14.6
  Rate = 0.002 +/- 0.0003

[Fri Oct  7 19:54:46 2011] Off-axis axis estimate = 6.56'
[Fri Oct  7 19:56:47 2011] Using EEF radius (= 1.93 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:47 2011] Initial guess for spatial extent in simple fitting = 1.93"
[Fri Oct  7 19:56:47 2011] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.037
[Fri Oct  7 19:56:47 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 1.93"
[Fri Oct  7 19:56:48 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src9.ximg exists
[Fri Oct  7 19:56:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src9.csv
[Fri Oct  7 19:56:48 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src9_1.ximg exists
[Fri Oct  7 19:56:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src9.csv
[Fri Oct  7 19:56:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Fri Oct  7 19:56:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Oct  7 19:56:57 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Oct  7 19:57:54 2011] Spatial fit model total counts = 102.988000, observed total counts = 103.000000
[Fri Oct  7 19:57:54 2011] Offset between fit and detection position for source 72 = 0.974619 pixels
[Fri Oct  7 19:57:54 2011] 103.853600 total counts/ 35.390200 bgd. counts: snr = 11.508453
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.974619 pixels
  Position = (368.9, 603.9) = 17 25 57.34 -34 18 50.7
  Extent = 1.2 (1.0-1.5)", rotation angle = 0
  Source counts = 68.5 +/- 10.2
  Background counts = 35.4
  Rate = 0.002 +/- 0.0003
[Fri Oct  7 19:57:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:54 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:54 2011] Source does appear to be extended
[Fri Oct  7 19:57:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:51 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Fri Oct  7 19:58:51 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.048
[Fri Oct  7 19:58:51 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 1.20"
[Fri Oct  7 19:58:53 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src9.ximg exists
[Fri Oct  7 19:58:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src9.csv
[Fri Oct  7 19:58:53 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src9_1.ximg exists
[Fri Oct  7 19:58:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src9.csv
[Fri Oct  7 19:58:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:59:02 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Fri Oct  7 19:59:02 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Oct  7 19:59:02 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Oct  7 19:59:58 2011] Spatial fit model total counts = 87.996600, observed total counts = 88.000000
[Fri Oct  7 19:59:58 2011] Offset between fit and detection position for source 72 = 0.409216 pixels
[Fri Oct  7 19:59:58 2011] 88.380000 total counts/ 34.480400 bgd. counts: snr = 9.179085
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.409216 pixels
  Position = (369.1, 604.3) = 17 25 57.33 -34 18 50.5
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 53.9 +/- 9.4
  Background counts = 34.5
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 19:59:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:58 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:58 2011] Source does appear to be extended
[Fri Oct  7 19:59:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:16:11 2011] Not overwriting source region fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72_src.reg
[Fri Oct  7 20:16:11 2011] Extracting stamp from image fullrun_ccd3_acisf10987_pi14-548_cl_sm2.00.img.gz, (325, 560) - (413, 648)
[Fri Oct  7 20:16:11 2011] Writing fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72.gif
[Fri Oct  7 20:16:46 2011] ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72_src.evt and ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72_bgd.evt exist, delete to re-create
[Fri Oct  7 20:16:47 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72_src.evt.gz[events] = 79 counts
[Fri Oct  7 20:16:47 2011] Mean chipx,y = (274.87, 590.00)
[Fri Oct  7 20:16:47 2011] Mean tdetx,y = (4542.00, 3335.87)
[Fri Oct  7 20:16:47 2011] chipx,y range = (258.00-295.00, 570.00-613.00)
[Fri Oct  7 20:16:47 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72_bgd.evt.gz[events] = 43 counts
[Fri Oct  7 20:16:47 2011] ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72_src.img and ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72_bgd.img exist, delete to re-create
[Fri Oct  7 20:16:47 2011] ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72_src.pi and ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72_bgd.pi exist, delete to re-create
[Fri Oct  7 20:16:47 2011] Not generating rmf since there are only 53 counts
[Fri Oct  7 20:16:49 2011] ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72_bgd.lc exist, delete to re-create
[Fri Oct  7 20:22:58 2011] 173.35
[Fri Oct  7 20:23:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:23 2011] Error reading totcts from fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72_src.pi.gz
[Fri Oct  7 20:23:24 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:24 2011] Using photon index=1.80, rate=0.00133, arf fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src72.arf
[Fri Oct  7 20:23:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:24 2011] Updating source flux to 2.3e-14
[Fri Oct  7 20:24:51 2011] Source 72 has fewer than 100.000000 counts, skipping spectral fitting