[Fri Oct  7 19:54:40 2011] Detection parameters:
  Position = (454.4, 360.9) = 17 25 53.93 -34 20 50.0
  Extent = 0.8" x 0.5", rotation angle = 64 degrees
  Source counts = 25.4 +/- 5.2
  Background counts = 1.6
  Rate = 0.0006 +/- 0.0001

[Fri Oct  7 19:54:46 2011] Off-axis axis estimate = 4.72'
[Fri Oct  7 19:56:47 2011] Using EEF radius (= 1.07 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:47 2011] Initial guess for spatial extent in simple fitting = 1.07"
[Fri Oct  7 19:56:47 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.043
[Fri Oct  7 19:56:47 2011] Giving source the simple spatial ID 71 for pass 0, mean size = 1.07"
[Fri Oct  7 19:56:56 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src71.ximg exists
[Fri Oct  7 19:56:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src71.csv
[Fri Oct  7 19:56:56 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src71_1.ximg exists
[Fri Oct  7 19:56:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src71.csv
[Fri Oct  7 19:56:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:57:01 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src71.ximg exists
[Fri Oct  7 19:57:01 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src71_1.ximg exists
[Fri Oct  7 19:57:01 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src71 appears to have run properly
[Fri Oct  7 19:57:54 2011] Spatial fit model total counts = 35.999300, observed total counts = 36.000000
[Fri Oct  7 19:57:54 2011] Offset between fit and detection position for source 64 = 0.853099 pixels
[Fri Oct  7 19:57:54 2011] 35.596200 total counts/ 15.343600 bgd. counts: snr = 5.170317
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 0.853099 pixels
  Position = (454.8, 361.7) = 17 25 53.94 -34 20 49.9
  Extent = 0.7 (0.4-0.9)", rotation angle = 0
  Source counts = 20.3 +/- 6.0
  Background counts = 15.3
  Rate = 0.0005 +/- 0.0001
[Fri Oct  7 19:57:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:54 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:54 2011] Source does appear to be extended
[Fri Oct  7 19:57:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:51 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Fri Oct  7 19:58:51 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.192
[Fri Oct  7 19:58:51 2011] Giving source the simple spatial ID 71 for pass 1, mean size = 0.66"
[Fri Oct  7 19:58:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src71.ximg exists
[Fri Oct  7 19:58:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src71.csv
[Fri Oct  7 19:58:58 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src71_1.ximg exists
[Fri Oct  7 19:58:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src71.csv
[Fri Oct  7 19:58:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:59:05 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src71.ximg exists
[Fri Oct  7 19:59:05 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src71_1.ximg exists
[Fri Oct  7 19:59:05 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src71 appears to have run properly
[Fri Oct  7 19:59:58 2011] Spatial fit model total counts = 36.039300, observed total counts = 36.000000
[Fri Oct  7 19:59:58 2011] Offset between fit and detection position for source 64 = 0.051740 pixels
[Fri Oct  7 19:59:58 2011] 35.645900 total counts/ 15.017200 bgd. counts: snr = 5.323256
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 0.051740 pixels
  Position = (454.8, 361.7) = 17 25 53.94 -34 20 49.9
  Extent = 0.7 (0.4-0.9)", rotation angle = 0
  Source counts = 20.6 +/- 6.0
  Background counts = 15.0
  Rate = 0.0005 +/- 0.0001
[Fri Oct  7 19:59:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:58 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:58 2011] Source does appear to be extended
[Fri Oct  7 19:59:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:16:12 2011] Not overwriting source region fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64_src.reg
[Fri Oct  7 20:16:12 2011] Extracting stamp from image fullrun_ccd3_acisf10987_pi14-548_cl_sm2.00.img.gz, (424, 331) - (486, 393)
[Fri Oct  7 20:16:12 2011] Writing fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64.gif
[Fri Oct  7 20:20:06 2011] ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64_src.evt and ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64_bgd.evt exist, delete to re-create
[Fri Oct  7 20:20:06 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64_src.evt.gz[events] = 25 counts
[Fri Oct  7 20:20:06 2011] Mean chipx,y = (414.96, 806.92)
[Fri Oct  7 20:20:06 2011] Mean tdetx,y = (4325.08, 3475.96)
[Fri Oct  7 20:20:06 2011] chipx,y range = (397.00-432.00, 789.00-824.00)
[Fri Oct  7 20:20:06 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64_bgd.evt.gz[events] = 17 counts
[Fri Oct  7 20:20:06 2011] ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64_src.img and ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64_bgd.img exist, delete to re-create
[Fri Oct  7 20:20:06 2011] ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64_src.pi and ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64_bgd.pi exist, delete to re-create
[Fri Oct  7 20:20:06 2011] Not generating rmf since there are only 20 counts
[Fri Oct  7 20:20:09 2011] ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64_bgd.lc exist, delete to re-create
[Fri Oct  7 20:23:01 2011] 182.526
[Fri Oct  7 20:23:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:23 2011] Error reading totcts from fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64_src.pi.gz
[Fri Oct  7 20:23:25 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:25 2011] Using photon index=1.80, rate=0.000509, arf fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src64.arf
[Fri Oct  7 20:23:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:25 2011] Updating source flux to 8.6e-15
[Fri Oct  7 20:24:51 2011] Source 64 has fewer than 100.000000 counts, skipping spectral fitting