[Fri Oct  7 19:54:40 2011] Detection parameters:
  Position = (395.4, 336.7) = 17 25 56.28 -34 21 1.9
  Extent = 1.0" x 0.6", rotation angle = 65 degrees
  Source counts = 19.6 +/- 4.7
  Background counts = 2.4
  Rate = 0.0005 +/- 0.0001

[Fri Oct  7 19:54:46 2011] Off-axis axis estimate = 5.02'
[Fri Oct  7 19:56:47 2011] Using EEF radius (= 1.19 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:47 2011] Initial guess for spatial extent in simple fitting = 1.19"
[Fri Oct  7 19:56:47 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.060
[Fri Oct  7 19:56:47 2011] Giving source the simple spatial ID 85 for pass 0, mean size = 1.19"
[Fri Oct  7 19:56:56 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src85.ximg exists
[Fri Oct  7 19:56:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src85.csv
[Fri Oct  7 19:56:56 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src85_1.ximg exists
[Fri Oct  7 19:56:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src85.csv
[Fri Oct  7 19:56:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:57:01 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src85.ximg exists
[Fri Oct  7 19:57:01 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src85_1.ximg exists
[Fri Oct  7 19:57:01 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src85 appears to have run properly
[Fri Oct  7 19:57:54 2011] Spatial fit model total counts = 25.910600, observed total counts = 26.000000
[Fri Oct  7 19:57:54 2011] Offset between fit and detection position for source 63 = 0.462634 pixels
[Fri Oct  7 19:57:54 2011] 26.407500 total counts/ 10.711100 bgd. counts: snr = 4.796042
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.462634 pixels
  Position = (395.7, 336.3) = 17 25 56.28 -34 21 2.3
  Extent = 0.7 (0.5-1.3)", rotation angle = 0
  Source counts = 15.7 +/- 5.1
  Background counts = 10.7
  Rate = 0.0004 +/- 0.0001
[Fri Oct  7 19:57:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:54 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:54 2011] Source does appear to be extended
[Fri Oct  7 19:57:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:51 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Oct  7 19:58:51 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.988
[Fri Oct  7 19:58:51 2011] Giving source the simple spatial ID 85 for pass 1, mean size = 0.74"
[Fri Oct  7 19:58:58 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src85.ximg exists
[Fri Oct  7 19:58:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src85.csv
[Fri Oct  7 19:58:58 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src85_1.ximg exists
[Fri Oct  7 19:58:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src85.csv
[Fri Oct  7 19:58:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:59:05 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src85.ximg exists
[Fri Oct  7 19:59:05 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src85_1.ximg exists
[Fri Oct  7 19:59:05 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src85 appears to have run properly
[Fri Oct  7 19:59:58 2011] Spatial fit model total counts = 26.990500, observed total counts = 27.000000
[Fri Oct  7 19:59:58 2011] Offset between fit and detection position for source 63 = 0.041605 pixels
[Fri Oct  7 19:59:58 2011] 27.428400 total counts/ 11.460500 bgd. counts: snr = 4.716784
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.041605 pixels
  Position = (395.8, 336.4) = 17 25 56.28 -34 21 2.3
  Extent = 0.8 (0.5-1.2)", rotation angle = 0
  Source counts = 16.0 +/- 5.2
  Background counts = 11.5
  Rate = 0.0004 +/- 0.0001
[Fri Oct  7 19:59:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:58 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:58 2011] Source does appear to be extended
[Fri Oct  7 19:59:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:16:13 2011] Not overwriting source region fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63_src.reg
[Fri Oct  7 20:16:13 2011] Extracting stamp from image fullrun_ccd3_acisf10987_pi14-548_cl_sm2.00.img.gz, (360, 301) - (431, 372)
[Fri Oct  7 20:16:13 2011] Writing fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63.gif
[Fri Oct  7 20:20:57 2011] ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63_src.evt and ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63_bgd.evt exist, delete to re-create
[Fri Oct  7 20:20:57 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63_src.evt.gz[events] = 22 counts
[Fri Oct  7 20:20:57 2011] Mean chipx,y = (365.91, 847.36)
[Fri Oct  7 20:20:57 2011] Mean tdetx,y = (4284.64, 3426.91)
[Fri Oct  7 20:20:57 2011] chipx,y range = (345.00-383.00, 826.00-868.00)
[Fri Oct  7 20:20:57 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63_bgd.evt.gz[events] = 37 counts
[Fri Oct  7 20:20:57 2011] ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63_src.img and ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63_bgd.img exist, delete to re-create
[Fri Oct  7 20:20:57 2011] ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63_src.pi and ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63_bgd.pi exist, delete to re-create
[Fri Oct  7 20:20:57 2011] Not generating rmf since there are only 15 counts
[Fri Oct  7 20:21:03 2011] ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63_bgd.lc exist, delete to re-create
[Fri Oct  7 20:23:01 2011] 180.522
[Fri Oct  7 20:23:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:24 2011] Error reading totcts from fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63_src.pi.gz
[Fri Oct  7 20:23:25 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:25 2011] Using photon index=1.80, rate=0.000394, arf fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src63.arf
[Fri Oct  7 20:23:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:25 2011] Updating source flux to 6.7e-15
[Fri Oct  7 20:24:51 2011] Source 63 has fewer than 100.000000 counts, skipping spectral fitting