[Fri Oct  7 19:54:39 2011] Detection parameters:
  Position = (948.9, 152.9) = 17 25 34.29 -34 22 32.4
  Extent = 0.5" x 0.5", rotation angle = 170 degrees
  Source counts = 22.3 +/- 5.0
  Background counts = 2.7
  Rate = 0.0005 +/- 0.0001

[Fri Oct  7 19:54:46 2011] Off-axis axis estimate = 1.09'
[Fri Oct  7 19:56:47 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:47 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct  7 19:56:47 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.617
[Fri Oct  7 19:56:47 2011] Giving source the simple spatial ID 76 for pass 0, mean size = 0.38"
[Fri Oct  7 19:56:56 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src76.ximg exists
[Fri Oct  7 19:56:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src76.csv
[Fri Oct  7 19:56:56 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src76_1.ximg exists
[Fri Oct  7 19:56:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src76.csv
[Fri Oct  7 19:56:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:57:01 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src76.ximg exists
[Fri Oct  7 19:57:01 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src76_1.ximg exists
[Fri Oct  7 19:57:01 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src76 appears to have run properly
[Fri Oct  7 19:57:54 2011] Spatial fit model total counts = 27.445000, observed total counts = 29.000000
[Fri Oct  7 19:57:54 2011] Offset between fit and detection position for source 43 = 0.815919 pixels
[Fri Oct  7 19:57:54 2011] 26.676090 total counts/ 4.215690 bgd. counts: snr = 10.939139
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.815919 pixels
  Position = (949.5, 153.5) = 17 25 34.28 -34 22 32.4
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 22.5 +/- 5.2
  Background counts = 4.2
  Rate = 0.0006 +/- 0.0001
[Fri Oct  7 19:57:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:54 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:54 2011] Source does appear to be extended
[Fri Oct  7 19:57:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:51 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Oct  7 19:58:51 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.132
[Fri Oct  7 19:58:51 2011] Giving source the simple spatial ID 76 for pass 1, mean size = 0.45"
[Fri Oct  7 19:58:58 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src76.ximg exists
[Fri Oct  7 19:58:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src76.csv
[Fri Oct  7 19:58:58 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src76_1.ximg exists
[Fri Oct  7 19:58:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src76.csv
[Fri Oct  7 19:58:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src76_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:59:05 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src76.ximg exists
[Fri Oct  7 19:59:05 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src76_1.ximg exists
[Fri Oct  7 19:59:05 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src76 appears to have run properly
[Fri Oct  7 19:59:58 2011] Spatial fit model total counts = 27.444100, observed total counts = 29.000000
[Fri Oct  7 19:59:58 2011] Offset between fit and detection position for source 43 = 0.015015 pixels
[Fri Oct  7 19:59:58 2011] 26.745040 total counts/ 4.176940 bgd. counts: snr = 11.042461
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.015015 pixels
  Position = (949.5, 153.5) = 17 25 34.28 -34 22 32.4
  Extent = 0.5 (0.3-0.5)", rotation angle = 0
  Source counts = 22.6 +/- 5.2
  Background counts = 4.2
  Rate = 0.0006 +/- 0.0001
[Fri Oct  7 19:59:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:58 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:58 2011] Source does appear to be extended
[Fri Oct  7 19:59:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:16:13 2011] Not overwriting source region fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43_src.reg
[Fri Oct  7 20:16:13 2011] Extracting stamp from image fullrun_ccd3_acisf10987_pi14-548_cl_sm2.00.img.gz, (929, 133) - (970, 174)
[Fri Oct  7 20:16:13 2011] Writing fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43.gif
[Fri Oct  7 20:20:21 2011] ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43_src.evt and ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43_bgd.evt exist, delete to re-create
[Fri Oct  7 20:20:21 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43_src.evt.gz[events] = 23 counts
[Fri Oct  7 20:20:21 2011] Mean chipx,y = (944.96, 889.83)
[Fri Oct  7 20:20:21 2011] Mean tdetx,y = (4242.17, 4005.96)
[Fri Oct  7 20:20:21 2011] chipx,y range = (929.00-965.00, 874.00-909.00)
[Fri Oct  7 20:20:21 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43_bgd.evt.gz[events] = 16 counts
[Fri Oct  7 20:20:21 2011] ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43_src.img and ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43_bgd.img exist, delete to re-create
[Fri Oct  7 20:20:21 2011] ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43_src.pi and ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43_bgd.pi exist, delete to re-create
[Fri Oct  7 20:20:21 2011] Not generating rmf since there are only 22 counts
[Fri Oct  7 20:20:24 2011] ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43_bgd.lc exist, delete to re-create
[Fri Oct  7 20:23:01 2011] 202.09
[Fri Oct  7 20:23:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:23 2011] Error reading totcts from fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43_src.pi.gz
[Fri Oct  7 20:23:25 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:25 2011] Using photon index=1.80, rate=0.000557, arf fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src43.arf
[Fri Oct  7 20:23:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:25 2011] Updating source flux to 8.6e-15
[Fri Oct  7 20:24:51 2011] Source 43 has fewer than 100.000000 counts, skipping spectral fitting