[Fri Oct  7 19:54:39 2011] Detection parameters:
  Position = (958.4, 109.9) = 17 25 33.91 -34 22 53.6
  Extent = 0.5" x 0.5", rotation angle = 33 degrees
  Source counts = 52.6 +/- 7.9
  Background counts = 9.4
  Rate = 0.001 +/- 0.0002

[Fri Oct  7 19:54:46 2011] Off-axis axis estimate = 0.78'
[Fri Oct  7 19:56:47 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:47 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct  7 19:56:47 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.919
[Fri Oct  7 19:56:47 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.38"
[Fri Oct  7 19:56:51 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src28.ximg exists
[Fri Oct  7 19:56:52 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src28.csv
[Fri Oct  7 19:56:52 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src28_1.ximg exists
[Fri Oct  7 19:56:52 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src28.csv
[Fri Oct  7 19:56:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Fri Oct  7 19:56:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src28.csv
[Fri Oct  7 19:56:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Oct  7 19:56:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src28.csv
[Fri Oct  7 19:56:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:57:54 2011] Spatial fit model total counts = 79.376400, observed total counts = 140.000000
[Fri Oct  7 19:57:54 2011] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Oct  7 19:57:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:54 2011] Assessing source extent using major
[Fri Oct  7 19:57:54 2011] Source does appear to be extended
[Fri Oct  7 19:57:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:51 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:51 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct  7 19:58:51 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.919
[Fri Oct  7 19:58:51 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.38"
[Fri Oct  7 19:58:54 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src28.ximg exists
[Fri Oct  7 19:58:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src28.csv
[Fri Oct  7 19:58:54 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src28_1.ximg exists
[Fri Oct  7 19:58:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src28.csv
[Fri Oct  7 19:58:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:59:02 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Fri Oct  7 19:59:02 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Oct  7 19:59:02 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Oct  7 19:59:58 2011] Spatial fit model total counts = 130.946000, observed total counts = 140.000000
[Fri Oct  7 19:59:58 2011] Offset between fit and detection position for source 30 = 0.805253 pixels
[Fri Oct  7 19:59:58 2011] 115.535100 total counts/ 73.003200 bgd. counts: snr = 4.977873
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.805253 pixels
  Position = (959.0, 110.5) = 17 25 33.91 -34 22 53.5
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 42.5 +/- 10.7
  Background counts = 73.0
  Rate = 0.001 +/- 0.0003
[Fri Oct  7 19:59:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:58 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:58 2011] Source does appear to be extended
[Fri Oct  7 19:59:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:16:11 2011] Not overwriting source region fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30_src.reg
[Fri Oct  7 20:16:11 2011] Extracting stamp from image fullrun_ccd3_acisf10987_pi14-548_cl_sm2.00.img.gz, (941, 92) - (977, 129)
[Fri Oct  7 20:16:11 2011] Writing fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30.gif
[Fri Oct  7 20:17:43 2011] ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30_src.evt and ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Fri Oct  7 20:17:43 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30_src.evt.gz[events] = 49 counts
[Fri Oct  7 20:17:43 2011] Mean chipx,y = (968.20, 932.57)
[Fri Oct  7 20:17:43 2011] Mean tdetx,y = (4199.43, 4029.20)
[Fri Oct  7 20:17:43 2011] chipx,y range = (948.00-986.00, 915.00-950.00)
[Fri Oct  7 20:17:43 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 37 counts
[Fri Oct  7 20:17:43 2011] ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30_src.img and ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Fri Oct  7 20:17:43 2011] ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30_src.pi and ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Fri Oct  7 20:17:43 2011] Not generating rmf since there are only 42 counts
[Fri Oct  7 20:17:46 2011] ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Fri Oct  7 20:22:59 2011] 202.504
[Fri Oct  7 20:23:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:23 2011] Error reading totcts from fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30_src.pi.gz
[Fri Oct  7 20:23:24 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:24 2011] Using photon index=1.80, rate=0.00105, arf fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src30.arf
[Fri Oct  7 20:23:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:24 2011] Updating source flux to 1.6e-14
[Fri Oct  7 20:24:51 2011] Flag p found in src. 30 procflags, skipping spectral fitting
[Fri Oct  7 20:24:51 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting