[Fri Oct  7 19:54:38 2011] Detection parameters:
  Position = (949.9, 74.3) = 17 25 34.25 -34 23 11.1
  Extent = 0.5" x 0.5", rotation angle = 54 degrees
  Source counts = 911.1 +/- 30.6
  Background counts = 24.9
  Rate = 0.02 +/- 0.0008

[Fri Oct  7 19:54:46 2011] Off-axis axis estimate = 0.48'
[Fri Oct  7 19:56:47 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:47 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Oct  7 19:56:47 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.888
[Fri Oct  7 19:56:47 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Fri Oct  7 19:56:48 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 19:56:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 19:56:48 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 19:56:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src1.csv
[Fri Oct  7 19:56:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 19:56:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 19:56:57 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 19:57:54 2011] Spatial fit model total counts = 945.672000, observed total counts = 942.000000
[Fri Oct  7 19:57:54 2011] Offset between fit and detection position for source 2 = 0.679381 pixels
[Fri Oct  7 19:57:54 2011] 950.900600 total counts/ 83.683600 bgd. counts: snr = 94.799840
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.679381 pixels
  Position = (950.4, 74.7) = 17 25 34.25 -34 23 11.1
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 867.2 +/- 30.8
  Background counts = 83.7
  Rate = 0.02 +/- 0.0008
[Fri Oct  7 19:57:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:54 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:54 2011] Source does appear to be extended
[Fri Oct  7 19:57:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:51 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Oct  7 19:58:51 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.219
[Fri Oct  7 19:58:51 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.42"
[Fri Oct  7 19:58:53 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 19:58:53 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 19:58:53 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 19:58:53 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 19:58:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:58:59 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 19:58:59 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 19:58:59 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct  7 19:59:57 2011] Spatial fit model total counts = 943.179000, observed total counts = 947.000000
[Fri Oct  7 19:59:57 2011] Offset between fit and detection position for source 2 = 0.008738 pixels
[Fri Oct  7 19:59:57 2011] 948.088100 total counts/ 86.800100 bgd. counts: snr = 92.446034
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.008738 pixels
  Position = (950.4, 74.7) = 17 25 34.25 -34 23 11.1
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 861.3 +/- 30.8
  Background counts = 86.8
  Rate = 0.02 +/- 0.0008
[Fri Oct  7 19:59:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:58 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:58 2011] Source does appear to be extended
[Fri Oct  7 19:59:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:16:11 2011] Not overwriting source region fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_src.reg
[Fri Oct  7 20:16:11 2011] Extracting stamp from image fullrun_ccd3_acisf10987_pi14-548_cl_sm2.00.img.gz, (931, 55) - (970, 94)
[Fri Oct  7 20:16:11 2011] Writing fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2.gif
[Fri Oct  7 20:16:18 2011] ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_src.evt and ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct  7 20:16:18 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_src.evt.gz[events] = 889 counts
[Fri Oct  7 20:16:18 2011] Mean chipx,y = (967.99, 969.02)
[Fri Oct  7 20:16:18 2011] Mean tdetx,y = (4162.98, 4028.99)
[Fri Oct  7 20:16:18 2011] chipx,y range = (948.00-988.00, 949.00-988.00)
[Fri Oct  7 20:16:18 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 40 counts
[Fri Oct  7 20:16:18 2011] ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_src.img and ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct  7 20:16:18 2011] ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_src.pi and ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct  7 20:16:23 2011] ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct  7 20:22:58 2011] Keeping rmf generated by specextract
[Fri Oct  7 20:22:58 2011] 202.586
[Fri Oct  7 20:23:22 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:22 2011] Error reading totcts from fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct  7 20:23:24 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:24 2011] Using photon index=1.80, rate=0.0213, arf fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2.arf
[Fri Oct  7 20:23:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:24 2011] Updating source flux to 3.3e-13
[Fri Oct  7 20:25:17 2011] Reading fit data from acisf10987/analysis//spectral/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_pl.csv
[Fri Oct  7 20:25:17 2011] Spectral fit parameter nH value = 9.73901e+21
[Fri Oct  7 20:25:17 2011] Spectral fit parameter PhoIndex value = 3.28156
[Fri Oct  7 20:25:17 2011] Failed to get F(0.3-8.0) from acisf10987/analysis//spectral/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Oct  7 20:25:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:25:17 2011] Using Nh = 9.7e+21, photon index=3.28, rate=0.0213, arf fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src2.arf
[Fri Oct  7 20:25:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:25:17 2011] Updating source flux to 1.8e-13