[Fri Oct  7 19:54:44 2011] Detection parameters:
  Position = (270.6, 973.6) = 17 26 1.21 -34 15 48.5
  Extent = 4.7" x 2.9", rotation angle = 29 degrees
  Source counts = 126.9 +/- 14.4
  Background counts = 81.1
  Rate = 0.003 +/- 0.0004

[Fri Oct  7 19:54:46 2011] Off-axis axis estimate = 9.44'
[Fri Oct  7 19:56:47 2011] Using EEF radius (= 3.95 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 19:56:47 2011] Initial guess for spatial extent in simple fitting = 3.95"
[Fri Oct  7 19:56:47 2011] source mask rpix=8.0, npix_max = 290, mask sum = 289, frac = 0.996
[Fri Oct  7 19:56:47 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 3.95"
[Fri Oct  7 19:56:48 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src6.ximg exists
[Fri Oct  7 19:56:48 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Oct  7 19:56:48 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src6 appears to have run properly
[Fri Oct  7 19:56:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct  7 19:56:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct  7 19:56:57 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct  7 19:57:54 2011] Warning, spatial fit 6 centroid is now closest to src. 124
[Fri Oct  7 19:57:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:54 2011] Assessing source extent using major
[Fri Oct  7 19:57:54 2011] Source does appear to be extended
[Fri Oct  7 19:57:54 2011] Computing asymmetry using major and minor axis, asym = 1.63
[Fri Oct  7 19:57:54 2011] Source is asymmetric
[Fri Oct  7 19:58:51 2011] Using EEF radius (= 3.95 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 19:58:51 2011] Initial guess for spatial extent in simple fitting = 3.95"
[Fri Oct  7 19:58:51 2011] source mask rpix=8.0, npix_max = 290, mask sum = 289, frac = 0.996
[Fri Oct  7 19:58:51 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 3.95"
[Fri Oct  7 19:58:53 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src6.ximg exists
[Fri Oct  7 19:58:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src6.csv
[Fri Oct  7 19:58:53 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Oct  7 19:58:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src6.csv
[Fri Oct  7 19:58:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:59:02 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Oct  7 19:59:02 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Oct  7 19:59:02 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Oct  7 19:59:57 2011] Spatial fit model total counts = 242.411000, observed total counts = 243.000000
[Fri Oct  7 19:59:57 2011] Offset between fit and detection position for source 130 = 1.982302 pixels
[Fri Oct  7 19:59:57 2011] 226.934000 total counts/ 118.093000 bgd. counts: snr = 10.015680
Spatial fit parameters:
  Offset between fit and detection position for source 130 = 1.982302 pixels
  Position = (272.6, 973.6) = 17 26 1.15 -34 15 48.7
  Extent = 3.2 (2.6-4.0)", rotation angle = 0
  Source counts = 108.8 +/- 15.1
  Background counts = 118.1
  Rate = 0.003 +/- 0.0004
[Fri Oct  7 19:59:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:58 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:58 2011] Source does appear to be extended
[Fri Oct  7 19:59:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:16:11 2011] Not overwriting source region fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130_src.reg
[Fri Oct  7 20:16:11 2011] Extracting stamp from image fullrun_ccd3_acisf10987_pi14-548_cl_sm2.00.img.gz, (124, 825) - (421, 1122)
[Fri Oct  7 20:16:11 2011] Writing fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130.gif
[Fri Oct  7 20:16:37 2011] ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130_src.evt and ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130_bgd.evt exist, delete to re-create
[Fri Oct  7 20:16:37 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130_src.evt.gz[events] = 221 counts
[Fri Oct  7 20:16:37 2011] Mean chipx,y = (93.13, 254.57)
[Fri Oct  7 20:16:37 2011] Mean tdetx,y = (4877.43, 3154.13)
[Fri Oct  7 20:16:37 2011] chipx,y range = (55.00-135.00, 217.00-291.00)
[Fri Oct  7 20:16:37 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130_bgd.evt.gz[events] = 682 counts
[Fri Oct  7 20:16:37 2011] ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130_src.img and ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130_bgd.img exist, delete to re-create
[Fri Oct  7 20:16:37 2011] ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130_src.pi and ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130_bgd.pi exist, delete to re-create
[Fri Oct  7 20:16:40 2011] ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130_bgd.lc exist, delete to re-create
[Fri Oct  7 20:22:58 2011] Keeping rmf generated by specextract
[Fri Oct  7 20:22:58 2011] 158.751
[Fri Oct  7 20:23:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:23 2011] Error reading totcts from fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130_src.pi.gz
[Fri Oct  7 20:23:24 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:24 2011] Using photon index=1.80, rate=0.00269, arf fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src130.arf
[Fri Oct  7 20:23:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:24 2011] Updating source flux to 5e-14