[Fri Oct  7 19:54:43 2011] Detection parameters:
  Position = (365.2, 916.5) = 17 25 57.45 -34 16 16.6
  Extent = 2.8" x 1.9", rotation angle = 18 degrees
  Source counts = 40.2 +/- 7.7
  Background counts = 19.8
  Rate = 0.001 +/- 0.0002

[Fri Oct  7 19:54:46 2011] Off-axis axis estimate = 8.63'
[Fri Oct  7 19:56:47 2011] Using EEF radius (= 3.29 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:47 2011] Initial guess for spatial extent in simple fitting = 3.29"
[Fri Oct  7 19:56:47 2011] source mask rpix=6.7, npix_max = 206, mask sum = 210, frac = 1.017
[Fri Oct  7 19:56:47 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 3.29"
[Fri Oct  7 19:56:54 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src41.ximg exists
[Fri Oct  7 19:56:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src41.csv
[Fri Oct  7 19:56:54 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src41_1.ximg exists
[Fri Oct  7 19:56:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src41.csv
[Fri Oct  7 19:56:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:58 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src41.ximg exists
[Fri Oct  7 19:56:59 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src41_1.ximg exists
[Fri Oct  7 19:56:59 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src41 appears to have run properly
[Fri Oct  7 19:57:54 2011] Spatial fit model total counts = 76.089800, observed total counts = 76.000000
[Fri Oct  7 19:57:54 2011] Offset between fit and detection position for source 125 = 1.752611 pixels
[Fri Oct  7 19:57:54 2011] 76.396600 total counts/ 41.076100 bgd. counts: snr = 5.511023
Spatial fit parameters:
  Offset between fit and detection position for source 125 = 1.752611 pixels
  Position = (363.6, 915.9) = 17 25 57.54 -34 16 17.2
  Extent = 1.7 (1.3-2.3)", rotation angle = 0
  Source counts = 35.3 +/- 8.7
  Background counts = 41.1
  Rate = 0.0009 +/- 0.0002
[Fri Oct  7 19:57:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:54 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:54 2011] Source does appear to be extended
[Fri Oct  7 19:57:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:51 2011] Initial guess for spatial extent in simple fitting = 1.69"
[Fri Oct  7 19:58:51 2011] source mask rpix=3.4, npix_max = 62, mask sum = 64, frac = 1.030
[Fri Oct  7 19:58:51 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 1.69"
[Fri Oct  7 19:58:55 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src41.ximg exists
[Fri Oct  7 19:58:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src41.csv
[Fri Oct  7 19:58:55 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src41_1.ximg exists
[Fri Oct  7 19:58:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src41.csv
[Fri Oct  7 19:58:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:59:02 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src41.ximg exists
[Fri Oct  7 19:59:02 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src41_1.ximg exists
[Fri Oct  7 19:59:02 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src41 appears to have run properly
[Fri Oct  7 19:59:58 2011] Spatial fit model total counts = 46.043700, observed total counts = 47.000000
[Fri Oct  7 19:59:58 2011] Offset between fit and detection position for source 125 = 0.837363 pixels
[Fri Oct  7 19:59:58 2011] 47.471100 total counts/ 10.777600 bgd. counts: snr = 11.177074
Spatial fit parameters:
  Offset between fit and detection position for source 125 = 0.837363 pixels
  Position = (363.1, 915.2) = 17 25 57.56 -34 16 17.5
  Extent = 1.7 (1.0-2.3)", rotation angle = 0
  Source counts = 36.7 +/- 6.9
  Background counts = 10.8
  Rate = 0.0009 +/- 0.0002
[Fri Oct  7 19:59:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:58 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:58 2011] Source does appear to be extended
[Fri Oct  7 19:59:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:16:12 2011] Not overwriting source region fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125_src.reg
[Fri Oct  7 20:16:12 2011] Extracting stamp from image fullrun_ccd3_acisf10987_pi14-548_cl_sm2.00.img.gz, (284, 836) - (442, 994)
[Fri Oct  7 20:16:12 2011] Writing fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125.gif
[Fri Oct  7 20:18:22 2011] ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125_src.evt and ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125_bgd.evt exist, delete to re-create
[Fri Oct  7 20:18:22 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125_src.evt.gz[events] = 49 counts
[Fri Oct  7 20:18:22 2011] Mean chipx,y = (197.20, 286.00)
[Fri Oct  7 20:18:22 2011] Mean tdetx,y = (4846.00, 3258.20)
[Fri Oct  7 20:18:22 2011] chipx,y range = (171.00-218.00, 266.00-310.00)
[Fri Oct  7 20:18:22 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125_bgd.evt.gz[events] = 146 counts
[Fri Oct  7 20:18:22 2011] ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125_src.img and ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125_bgd.img exist, delete to re-create
[Fri Oct  7 20:18:22 2011] ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125_src.pi and ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125_bgd.pi exist, delete to re-create
[Fri Oct  7 20:18:22 2011] Not generating rmf since there are only 36 counts
[Fri Oct  7 20:18:25 2011] ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125_bgd.lc exist, delete to re-create
[Fri Oct  7 20:22:59 2011] 155.883
[Fri Oct  7 20:23:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:23 2011] Error reading totcts from fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125_src.pi.gz
[Fri Oct  7 20:23:24 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:24 2011] Using photon index=1.80, rate=0.000905, arf fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src125.arf
[Fri Oct  7 20:23:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:24 2011] Updating source flux to 1.7e-14
[Fri Oct  7 20:24:51 2011] Source 125 has fewer than 100.000000 counts, skipping spectral fitting