[Fri Oct  7 19:54:43 2011] Detection parameters:
  Position = (189.8, 849.0) = 17 26 4.42 -34 16 49.7
  Extent = 1.5" x 1.1", rotation angle = 52 degrees
  Source counts = 56.2 +/- 11.2
  Background counts = 68.8
  Rate = 0.001 +/- 0.0003

[Fri Oct  7 19:54:46 2011] Off-axis axis estimate = 9.05'
[Fri Oct  7 19:56:47 2011] Using EEF radius (= 3.62 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:47 2011] Initial guess for spatial extent in simple fitting = 3.62"
[Fri Oct  7 19:56:47 2011] source mask rpix=7.4, npix_max = 246, mask sum = 256, frac = 1.038
[Fri Oct  7 19:56:47 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 3.62"
[Fri Oct  7 19:56:49 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src25.ximg exists
[Fri Oct  7 19:56:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src25.csv
[Fri Oct  7 19:56:50 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src25_1.ximg exists
[Fri Oct  7 19:56:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src25.csv
[Fri Oct  7 19:56:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Fri Oct  7 19:56:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Oct  7 19:56:57 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Oct  7 19:57:54 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 122 at 10.578399 pixels away
[Fri Oct  7 19:57:54 2011] Spatial fit model total counts = 227.762000, observed total counts = 227.000000
[Fri Oct  7 19:57:54 2011] Offset between fit and detection position for source 122 = 1.960228 pixels
[Fri Oct  7 19:57:54 2011] 227.607300 total counts/ 190.526000 bgd. counts: snr = 2.686444
Spatial fit parameters:
  Offset between fit and detection position for source 122 = 1.960228 pixels
  Position = (190.7, 850.7) = 17 26 4.40 -34 16 49.2
  Extent = 1.5 (1.1-2.2)", rotation angle = 0
  Source counts = 37.1 +/- 15.1
  Background counts = 190.5
  Rate = 0.0009 +/- 0.0004
[Fri Oct  7 19:57:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:54 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:54 2011] Source does appear to be extended
[Fri Oct  7 19:57:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:51 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Fri Oct  7 19:58:51 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Fri Oct  7 19:58:51 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 1.50"
[Fri Oct  7 19:58:54 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src25.ximg exists
[Fri Oct  7 19:58:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src25.csv
[Fri Oct  7 19:58:54 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src25_1.ximg exists
[Fri Oct  7 19:58:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src25.csv
[Fri Oct  7 19:58:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:59:02 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Fri Oct  7 19:59:02 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Oct  7 19:59:02 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Oct  7 19:59:57 2011] Spatial fit model total counts = 715.055000, observed total counts = 715.000000
[Fri Oct  7 19:59:57 2011] Offset between fit and detection position for source 122 = 8.849709 pixels
[Fri Oct  7 19:59:57 2011] Warning, changing simple spatial fit ID from 25 to 2
[Fri Oct  7 19:59:57 2011] 715.092145 total counts/ 715.092000 bgd. counts: snr = 0.000005
Spatial fit parameters:
  Offset between fit and detection position for source 122 = 8.849709 pixels
  Position = (190.5, 859.5) = 17 26 4.41 -34 16 44.8
  Extent = 7.4 (0.9-13.8)", rotation angle = 0
  Source counts = 0.0 +/- 26.7
  Background counts = 715.1
  Rate = 4e-09 +/- 0.0007
  Deleting source due to low Poisson probability