[Fri Oct  7 19:54:43 2011] Detection parameters:
  Position = (160.5, 800.1) = 17 26 5.59 -34 17 13.8
  Extent = 3.2" x 1.6", rotation angle = 42 degrees
  Source counts = 36.3 +/- 8.8
  Background counts = 41.7
  Rate = 0.0009 +/- 0.0002

[Fri Oct  7 19:54:46 2011] Off-axis axis estimate = 8.92'
[Fri Oct  7 19:56:47 2011] Using EEF radius (= 3.51 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:47 2011] Initial guess for spatial extent in simple fitting = 3.51"
[Fri Oct  7 19:56:47 2011] source mask rpix=7.1, npix_max = 233, mask sum = 240, frac = 1.028
[Fri Oct  7 19:56:47 2011] Giving source the simple spatial ID 49 for pass 0, mean size = 3.51"
[Fri Oct  7 19:56:54 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src49.ximg exists
[Fri Oct  7 19:56:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src49.csv
[Fri Oct  7 19:56:54 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src49_1.ximg exists
[Fri Oct  7 19:56:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src49.csv
[Fri Oct  7 19:56:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:57:00 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src49.ximg exists
[Fri Oct  7 19:57:00 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src49_1.ximg exists
[Fri Oct  7 19:57:00 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src49 appears to have run properly
[Fri Oct  7 19:57:54 2011] Spatial fit model total counts = 122.263000, observed total counts = 121.000000
[Fri Oct  7 19:57:54 2011] Offset between fit and detection position for source 119 = 1.651318 pixels
[Fri Oct  7 19:57:54 2011] 123.144200 total counts/ 88.013300 bgd. counts: snr = 3.744684
Spatial fit parameters:
  Offset between fit and detection position for source 119 = 1.651318 pixels
  Position = (158.9, 800.6) = 17 26 5.67 -34 17 13.8
  Extent = 1.5 (1.1-2.5)", rotation angle = 0
  Source counts = 35.1 +/- 11.1
  Background counts = 88.0
  Rate = 0.0009 +/- 0.0003
[Fri Oct  7 19:57:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:54 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:54 2011] Source does appear to be extended
[Fri Oct  7 19:57:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:51 2011] Initial guess for spatial extent in simple fitting = 1.47"
[Fri Oct  7 19:58:51 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.009
[Fri Oct  7 19:58:51 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 1.47"
[Fri Oct  7 19:58:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src49.ximg exists
[Fri Oct  7 19:58:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src49.csv
[Fri Oct  7 19:58:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src49_1.ximg exists
[Fri Oct  7 19:58:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src49.csv
[Fri Oct  7 19:58:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:59:02 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src49.ximg exists
[Fri Oct  7 19:59:02 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Oct  7 19:59:02 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src49 appears to have run properly
[Fri Oct  7 19:59:58 2011] Spatial fit model total counts = 48.979000, observed total counts = 49.000000
[Fri Oct  7 19:59:58 2011] Offset between fit and detection position for source 119 = 0.719479 pixels
[Fri Oct  7 19:59:58 2011] 49.849500 total counts/ 16.727800 bgd. counts: snr = 8.098288
Spatial fit parameters:
  Offset between fit and detection position for source 119 = 0.719479 pixels
  Position = (158.6, 799.9) = 17 26 5.68 -34 17 14.1
  Extent = 1.5 (0.8-2.0)", rotation angle = 0
  Source counts = 33.1 +/- 7.1
  Background counts = 16.7
  Rate = 0.0008 +/- 0.0002
[Fri Oct  7 19:59:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:58 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:58 2011] Source does appear to be extended
[Fri Oct  7 19:59:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:16:12 2011] Not overwriting source region fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119_src.reg
[Fri Oct  7 20:16:12 2011] Extracting stamp from image fullrun_ccd3_acisf10987_pi14-548_cl_sm2.00.img.gz, (92, 733) - (225, 867)
[Fri Oct  7 20:16:12 2011] Writing fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119.gif
[Fri Oct  7 20:18:50 2011] ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119_src.evt and ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119_bgd.evt exist, delete to re-create
[Fri Oct  7 20:18:50 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119_src.evt.gz[events] = 59 counts
[Fri Oct  7 20:18:50 2011] Mean chipx,y = (24.14, 451.15)
[Fri Oct  7 20:18:50 2011] Mean tdetx,y = (4680.85, 3085.14)
[Fri Oct  7 20:18:50 2011] chipx,y range = (5.00-46.00, 427.00-475.00)
[Fri Oct  7 20:18:50 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119_bgd.evt.gz[events] = 119 counts
[Fri Oct  7 20:18:50 2011] ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119_src.img and ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119_bgd.img exist, delete to re-create
[Fri Oct  7 20:18:50 2011] ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119_src.pi and ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119_bgd.pi exist, delete to re-create
[Fri Oct  7 20:18:50 2011] Not generating rmf since there are only 33 counts
[Fri Oct  7 20:18:53 2011] ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119_bgd.lc exist, delete to re-create
[Fri Oct  7 20:23:00 2011] 160.135
[Fri Oct  7 20:23:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:23 2011] Error reading totcts from fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119_src.pi.gz
[Fri Oct  7 20:23:24 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:24 2011] Using photon index=1.80, rate=0.000817, arf fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src119.arf
[Fri Oct  7 20:23:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:24 2011] Updating source flux to 1.5e-14
[Fri Oct  7 20:24:51 2011] Source 119 has fewer than 100.000000 counts, skipping spectral fitting