[Fri Oct  7 19:54:41 2011] Detection parameters:
  Position = (456.1, 651.5) = 17 25 53.85 -34 18 27.0
  Extent = 1.6" x 1.2", rotation angle = 26 degrees
  Source counts = 32.7 +/- 6.2
  Background counts = 6.3
  Rate = 0.0008 +/- 0.0002

[Fri Oct  7 19:54:46 2011] Off-axis axis estimate = 6.41'
[Fri Oct  7 19:56:47 2011] Using EEF radius (= 1.84 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:47 2011] Initial guess for spatial extent in simple fitting = 1.84"
[Fri Oct  7 19:56:47 2011] source mask rpix=3.7, npix_max = 72, mask sum = 72, frac = 0.998
[Fri Oct  7 19:56:47 2011] Giving source the simple spatial ID 55 for pass 0, mean size = 1.84"
[Fri Oct  7 19:56:55 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src55.ximg exists
[Fri Oct  7 19:56:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src55.csv
[Fri Oct  7 19:56:56 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src55_1.ximg exists
[Fri Oct  7 19:56:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src55.csv
[Fri Oct  7 19:56:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:57:00 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src55.ximg exists
[Fri Oct  7 19:57:00 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src55_1.ximg exists
[Fri Oct  7 19:57:00 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src55 appears to have run properly
[Fri Oct  7 19:57:54 2011] Spatial fit model total counts = 39.111200, observed total counts = 39.000000
[Fri Oct  7 19:57:54 2011] Offset between fit and detection position for source 101 = 1.857132 pixels
[Fri Oct  7 19:57:54 2011] 39.027460 total counts/ 7.809560 bgd. counts: snr = 11.170958
Spatial fit parameters:
  Offset between fit and detection position for source 101 = 1.857132 pixels
  Position = (457.5, 652.7) = 17 25 53.82 -34 18 26.7
  Extent = 1.3 (0.9-1.7)", rotation angle = 0
  Source counts = 31.2 +/- 6.2
  Background counts = 7.8
  Rate = 0.0008 +/- 0.0002
[Fri Oct  7 19:57:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:54 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:54 2011] Source does appear to be extended
[Fri Oct  7 19:57:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:51 2011] Initial guess for spatial extent in simple fitting = 1.30"
[Fri Oct  7 19:58:51 2011] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.068
[Fri Oct  7 19:58:51 2011] Giving source the simple spatial ID 55 for pass 1, mean size = 1.30"
[Fri Oct  7 19:58:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src55.ximg exists
[Fri Oct  7 19:58:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src55.csv
[Fri Oct  7 19:58:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src55_1.ximg exists
[Fri Oct  7 19:58:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src55.csv
[Fri Oct  7 19:58:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:59:03 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src55.ximg exists
[Fri Oct  7 19:59:03 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src55_1.ximg exists
[Fri Oct  7 19:59:03 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src55 appears to have run properly
[Fri Oct  7 19:59:58 2011] Spatial fit model total counts = 33.788800, observed total counts = 36.000000
[Fri Oct  7 19:59:58 2011] Offset between fit and detection position for source 101 = 1.067871 pixels
[Fri Oct  7 19:59:58 2011] 32.538440 total counts/ 2.273440 bgd. counts: snr = 20.072383
Spatial fit parameters:
  Offset between fit and detection position for source 101 = 1.067871 pixels
  Position = (457.6, 653.8) = 17 25 53.82 -34 18 26.1
  Extent = 1.2 (0.9-1.7)", rotation angle = 0
  Source counts = 30.3 +/- 5.7
  Background counts = 2.3
  Rate = 0.0007 +/- 0.0001
[Fri Oct  7 19:59:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:58 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:58 2011] Source does appear to be extended
[Fri Oct  7 19:59:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:16:12 2011] Not overwriting source region fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101_src.reg
[Fri Oct  7 20:16:12 2011] Extracting stamp from image fullrun_ccd3_acisf10987_pi14-548_cl_sm2.00.img.gz, (403, 600) - (512, 708)
[Fri Oct  7 20:16:12 2011] Writing fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101.gif
[Fri Oct  7 20:19:13 2011] ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101_src.evt and ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101_bgd.evt exist, delete to re-create
[Fri Oct  7 20:19:13 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101_src.evt.gz[events] = 36 counts
[Fri Oct  7 20:19:13 2011] Mean chipx,y = (351.83, 521.25)
[Fri Oct  7 20:19:13 2011] Mean tdetx,y = (4610.75, 3412.83)
[Fri Oct  7 20:19:13 2011] chipx,y range = (331.00-370.00, 505.00-539.00)
[Fri Oct  7 20:19:13 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101_bgd.evt.gz[events] = 47 counts
[Fri Oct  7 20:19:13 2011] ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101_src.img and ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101_bgd.img exist, delete to re-create
[Fri Oct  7 20:19:13 2011] ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101_src.pi and ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101_bgd.pi exist, delete to re-create
[Fri Oct  7 20:19:13 2011] Not generating rmf since there are only 30 counts
[Fri Oct  7 20:19:16 2011] ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101_bgd.lc exist, delete to re-create
[Fri Oct  7 20:23:00 2011] 176.06
[Fri Oct  7 20:23:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:23 2011] Error reading totcts from fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101_src.pi.gz
[Fri Oct  7 20:23:25 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:25 2011] Using photon index=1.80, rate=0.000747, arf fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src101.arf
[Fri Oct  7 20:23:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:25 2011] Updating source flux to 1.3e-14
[Fri Oct  7 20:24:51 2011] Source 101 has fewer than 100.000000 counts, skipping spectral fitting