[Fri Oct  7 19:54:35 2011] Detection parameters:
  Position = (699.3, 621.4) = 17 25 54.16 -34 26 59.7
  Extent = 1.3" x 0.7", rotation angle = 85 degrees
  Source counts = 43.2 +/- 6.9
  Background counts = 3.8
  Rate = 0.001 +/- 0.0002

[Fri Oct  7 19:54:36 2011] Off-axis axis estimate = 5.14'
[Fri Oct  7 19:56:42 2011] Using EEF radius (= 1.24 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:42 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Fri Oct  7 19:56:42 2011] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.961
[Fri Oct  7 19:56:42 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 1.24"
[Fri Oct  7 19:56:43 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src23.ximg exists
[Fri Oct  7 19:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src23.csv
[Fri Oct  7 19:56:44 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src23_1.ximg exists
[Fri Oct  7 19:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src23.csv
[Fri Oct  7 19:56:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:45 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Fri Oct  7 19:56:45 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Oct  7 19:56:45 2011] Fit fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Oct  7 19:57:41 2011] Spatial fit model total counts = 50.583600, observed total counts = 49.000000
[Fri Oct  7 19:57:41 2011] Offset between fit and detection position for source 97 = 0.549231 pixels
[Fri Oct  7 19:57:41 2011] 53.248390 total counts/ 4.357190 bgd. counts: snr = 23.422187
Spatial fit parameters:
  Offset between fit and detection position for source 97 = 0.549231 pixels
  Position = (699.0, 620.9) = 17 25 54.19 -34 27 0.2
  Extent = 1.4 (1.1-1.8)", rotation angle = 0
  Source counts = 48.9 +/- 7.3
  Background counts = 4.4
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 19:57:41 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:41 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:41 2011] Source does appear to be extended
[Fri Oct  7 19:57:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:47 2011] Initial guess for spatial extent in simple fitting = 1.45"
[Fri Oct  7 19:58:47 2011] source mask rpix=2.9, npix_max = 47, mask sum = 41, frac = 0.865
[Fri Oct  7 19:58:47 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 1.45"
[Fri Oct  7 19:58:48 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src23.ximg exists
[Fri Oct  7 19:58:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src23.csv
[Fri Oct  7 19:58:48 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src23_1.ximg exists
[Fri Oct  7 19:58:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src23.csv
[Fri Oct  7 19:58:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:58:50 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Fri Oct  7 19:58:50 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Oct  7 19:58:50 2011] Fit fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Oct  7 19:59:44 2011] Spatial fit model total counts = 49.492100, observed total counts = 49.000000
[Fri Oct  7 19:59:44 2011] Offset between fit and detection position for source 97 = 0.387375 pixels
[Fri Oct  7 19:59:44 2011] 51.864399 total counts/ 0.147099 bgd. counts: snr = 134.843800
Spatial fit parameters:
  Offset between fit and detection position for source 97 = 0.387375 pixels
  Position = (699.0, 621.3) = 17 25 54.19 -34 27 0.0
  Extent = 1.5 (1.3-1.7)", rotation angle = 0
  Source counts = 51.7 +/- 7.2
  Background counts = 0.1
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 19:59:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:44 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:44 2011] Source does appear to be extended
[Fri Oct  7 19:59:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:09:12 2011] Not overwriting source region fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97_src.reg
[Fri Oct  7 20:09:12 2011] Extracting stamp from image fullrun_ccd2_acisf10987_pi14-548_cl_sm2.00.img.gz, (632, 554) - (766, 688)
[Fri Oct  7 20:09:12 2011] Writing fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97.gif
[Fri Oct  7 20:10:38 2011] ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97_src.evt and ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97_bgd.evt exist, delete to re-create
[Fri Oct  7 20:10:38 2011] Size of ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97_src.evt.gz[events] = 52 counts
[Fri Oct  7 20:10:38 2011] Mean chipx,y = (432.60, 529.33)
[Fri Oct  7 20:10:38 2011] Mean tdetx,y = (3590.33, 3653.40)
[Fri Oct  7 20:10:38 2011] chipx,y range = (412.00-453.00, 507.00-551.00)
[Fri Oct  7 20:10:38 2011] Size of ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97_bgd.evt.gz[events] = 91 counts
[Fri Oct  7 20:10:38 2011] ../../acisf10987/products/images/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97_src.img and ../../acisf10987/products/images/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97_bgd.img exist, delete to re-create
[Fri Oct  7 20:10:38 2011] ../../acisf10987/products/spectra/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97_src.pi and ../../acisf10987/products/spectra/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97_bgd.pi exist, delete to re-create
[Fri Oct  7 20:10:38 2011] Not generating rmf since there are only 51 counts
[Fri Oct  7 20:10:41 2011] ../../acisf10987/products/lightcurves/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97_bgd.lc exist, delete to re-create
[Fri Oct  7 20:16:06 2011] 177.213
[Fri Oct  7 20:23:20 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:20 2011] Error reading totcts from fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97_src.pi.gz
[Fri Oct  7 20:23:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:21 2011] Using photon index=1.80, rate=0.00128, arf fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src97.arf
[Fri Oct  7 20:23:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:21 2011] Updating source flux to 2.2e-14
[Fri Oct  7 20:23:59 2011] Source 97 has fewer than 100.000000 counts, skipping spectral fitting