[Fri Oct  7 19:54:33 2011] Detection parameters:
  Position = (566.3, 1064.0) = 17 25 59.43 -34 23 21.9
  Extent = 0.8" x 0.5", rotation angle = 81 degrees
  Source counts = 17.9 +/- 4.4
  Background counts = 1.1
  Rate = 0.0004 +/- 0.0001

[Fri Oct  7 19:54:36 2011] Off-axis axis estimate = 4.96'
[Fri Oct  7 19:56:42 2011] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:42 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Fri Oct  7 19:56:42 2011] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.911
[Fri Oct  7 19:56:42 2011] Giving source the simple spatial ID 61 for pass 0, mean size = 1.17"
[Fri Oct  7 19:56:44 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src61.ximg exists
[Fri Oct  7 19:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src61.csv
[Fri Oct  7 19:56:44 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src61_1.ximg exists
[Fri Oct  7 19:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src61.csv
[Fri Oct  7 19:56:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:46 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src61.ximg exists
[Fri Oct  7 19:56:46 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src61_1.ximg exists
[Fri Oct  7 19:56:46 2011] Fit fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src61 appears to have run properly
[Fri Oct  7 19:57:41 2011] Spatial fit model total counts = 22.062200, observed total counts = 23.000000
[Fri Oct  7 19:57:41 2011] Offset between fit and detection position for source 80 = 0.331577 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.331577 pixels
  Position = (566.5, 1064.3) = 17 25 59.44 -34 23 22.0
  Extent = 0.9 (0.8-1.2)", rotation angle = 0
  Source counts = 23.3 +/- 4.8
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri Oct  7 19:57:41 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:41 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:41 2011] Source does appear to be extended
[Fri Oct  7 19:57:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:47 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Fri Oct  7 19:58:47 2011] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.901
[Fri Oct  7 19:58:47 2011] Giving source the simple spatial ID 60 for pass 1, mean size = 0.94"
[Fri Oct  7 19:58:49 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src60.ximg exists
[Fri Oct  7 19:58:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src60.csv
[Fri Oct  7 19:58:49 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src60_1.ximg exists
[Fri Oct  7 19:58:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src60.csv
[Fri Oct  7 19:58:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:58:50 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src60.ximg exists
[Fri Oct  7 19:58:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src60.csv
[Fri Oct  7 19:58:50 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src60_1.ximg exists
[Fri Oct  7 19:58:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src60.csv
[Fri Oct  7 19:58:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:59:44 2011] Spatial fit model total counts = 20.060200, observed total counts = 23.000000
[Fri Oct  7 19:59:44 2011] Offset between fit and detection position for source 80 = 0.083850 pixels
[Fri Oct  7 19:59:44 2011] 21.129036 total counts/ 0.138336 bgd. counts: snr = 56.436402
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.083850 pixels
  Position = (566.6, 1064.2) = 17 25 59.44 -34 23 22.1
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 21.0 +/- 4.6
  Background counts = 0.1
  Rate = 0.0005 +/- 0.0001
[Fri Oct  7 19:59:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:44 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:44 2011] Source does appear to be extended
[Fri Oct  7 19:59:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:09:13 2011] Not overwriting source region fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80_src.reg
[Fri Oct  7 20:09:13 2011] Extracting stamp from image fullrun_ccd2_acisf10987_pi14-548_cl_sm2.00.img.gz, (524, 1022) - (609, 1106)
[Fri Oct  7 20:09:13 2011] Writing fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80.gif
[Fri Oct  7 20:12:41 2011] ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80_src.evt and ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80_bgd.evt exist, delete to re-create
[Fri Oct  7 20:12:41 2011] Size of ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80_src.evt.gz[events] = 21 counts
[Fri Oct  7 20:12:41 2011] Mean chipx,y = (671.76, 924.62)
[Fri Oct  7 20:12:41 2011] Mean tdetx,y = (3985.62, 3414.24)
[Fri Oct  7 20:12:41 2011] chipx,y range = (652.00-687.00, 908.00-942.00)
[Fri Oct  7 20:12:41 2011] Size of ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80_bgd.evt.gz[events] = 32 counts
[Fri Oct  7 20:12:41 2011] ../../acisf10987/products/images/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80_src.img and ../../acisf10987/products/images/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80_bgd.img exist, delete to re-create
[Fri Oct  7 20:12:41 2011] ../../acisf10987/products/spectra/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80_src.pi and ../../acisf10987/products/spectra/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80_bgd.pi exist, delete to re-create
[Fri Oct  7 20:12:41 2011] Not generating rmf since there are only 20 counts
[Fri Oct  7 20:12:44 2011] ../../acisf10987/products/lightcurves/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80_bgd.lc exist, delete to re-create
[Fri Oct  7 20:16:07 2011] 175.743
[Fri Oct  7 20:23:20 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:20 2011] Error reading totcts from fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80_src.pi.gz
[Fri Oct  7 20:23:22 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:22 2011] Using photon index=1.80, rate=0.000518, arf fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src80.arf
[Fri Oct  7 20:23:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:22 2011] Updating source flux to 9e-15
[Fri Oct  7 20:23:59 2011] Source 80 has fewer than 100.000000 counts, skipping spectral fitting