[Fri Oct  7 19:54:33 2011] Detection parameters:
  Position = (1126.8, 974.5) = 17 25 37.15 -34 24 6.1
  Extent = 0.5" x 0.5", rotation angle = 118 degrees
  Source counts = 35.0 +/- 6.2
  Background counts = 3.0
  Rate = 0.0009 +/- 0.0002

[Fri Oct  7 19:54:36 2011] Off-axis axis estimate = 0.61'
[Fri Oct  7 19:56:42 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:42 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Oct  7 19:56:42 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.357
[Fri Oct  7 19:56:42 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 0.39"
[Fri Oct  7 19:56:44 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src31.ximg exists
[Fri Oct  7 19:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src31.csv
[Fri Oct  7 19:56:44 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src31_1.ximg exists
[Fri Oct  7 19:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src31.csv
[Fri Oct  7 19:56:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:46 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Fri Oct  7 19:56:46 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Oct  7 19:56:46 2011] Fit fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Fri Oct  7 19:57:41 2011] Spatial fit model total counts = 41.944300, observed total counts = 42.000000
[Fri Oct  7 19:57:41 2011] Offset between fit and detection position for source 67 = 0.561746 pixels
[Fri Oct  7 19:57:41 2011] 42.203840 total counts/ 8.131840 bgd. counts: snr = 11.948220
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 0.561746 pixels
  Position = (1127.0, 975.0) = 17 25 37.16 -34 24 6.1
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 34.1 +/- 6.5
  Background counts = 8.1
  Rate = 0.0008 +/- 0.0002
[Fri Oct  7 19:57:41 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:41 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:41 2011] Source does appear to be extended
[Fri Oct  7 19:57:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:47 2011] Initial guess for spatial extent in simple fitting = 0.32"
[Fri Oct  7 19:58:47 2011] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.743
[Fri Oct  7 19:58:47 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 0.32"
[Fri Oct  7 19:58:48 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src31.ximg exists
[Fri Oct  7 19:58:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src31.csv
[Fri Oct  7 19:58:48 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src31_1.ximg exists
[Fri Oct  7 19:58:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src31.csv
[Fri Oct  7 19:58:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:58:50 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Fri Oct  7 19:58:50 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Oct  7 19:58:50 2011] Fit fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Fri Oct  7 19:59:44 2011] Spatial fit model total counts = 41.935900, observed total counts = 42.000000
[Fri Oct  7 19:59:44 2011] Offset between fit and detection position for source 67 = 0.009391 pixels
[Fri Oct  7 19:59:44 2011] 42.217150 total counts/ 8.176650 bgd. counts: snr = 11.904420
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 0.009391 pixels
  Position = (1127.0, 975.0) = 17 25 37.16 -34 24 6.1
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 34.0 +/- 6.5
  Background counts = 8.2
  Rate = 0.0008 +/- 0.0002
[Fri Oct  7 19:59:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:44 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:44 2011] Source does appear to be extended
[Fri Oct  7 19:59:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:09:12 2011] Not overwriting source region fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67_src.reg
[Fri Oct  7 20:09:12 2011] Extracting stamp from image fullrun_ccd2_acisf10987_pi14-548_cl_sm2.00.img.gz, (1112, 960) - (1142, 990)
[Fri Oct  7 20:09:12 2011] Writing fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67.gif
[Fri Oct  7 20:11:06 2011] ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67_src.evt and ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67_bgd.evt exist, delete to re-create
[Fri Oct  7 20:11:06 2011] Size of ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67_src.evt.gz[events] = 36 counts
[Fri Oct  7 20:11:06 2011] Mean chipx,y = (103.28, 975.56)
[Fri Oct  7 20:11:06 2011] Mean tdetx,y = (4036.56, 3982.72)
[Fri Oct  7 20:11:06 2011] chipx,y range = (84.00-120.00, 960.00-993.00)
[Fri Oct  7 20:11:06 2011] Size of ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67_bgd.evt.gz[events] = 5 counts
[Fri Oct  7 20:11:06 2011] ../../acisf10987/products/images/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67_src.img and ../../acisf10987/products/images/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67_bgd.img exist, delete to re-create
[Fri Oct  7 20:11:06 2011] ../../acisf10987/products/spectra/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67_src.pi and ../../acisf10987/products/spectra/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67_bgd.pi exist, delete to re-create
[Fri Oct  7 20:11:06 2011] Not generating rmf since there are only 34 counts
[Fri Oct  7 20:11:10 2011] ../../acisf10987/products/lightcurves/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67_bgd.lc exist, delete to re-create
[Fri Oct  7 20:16:06 2011] 201.565
[Fri Oct  7 20:23:20 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:20 2011] Error reading totcts from fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67_src.pi.gz
[Fri Oct  7 20:23:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:21 2011] Using photon index=1.80, rate=0.00084, arf fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src67.arf
[Fri Oct  7 20:23:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:21 2011] Updating source flux to 1.3e-14
[Fri Oct  7 20:23:59 2011] Source 67 has fewer than 100.000000 counts, skipping spectral fitting