[Fri Oct  7 19:54:31 2011] Detection parameters:
  Position = (943.5, 741.2) = 17 25 44.44 -34 26 0.9
  Extent = 0.6" x 0.5", rotation angle = 105 degrees
  Source counts = 14.1 +/- 4.0
  Background counts = 1.9
  Rate = 0.0003 +/- 0.0001

[Fri Oct  7 19:54:36 2011] Off-axis axis estimate = 3.05'
[Fri Oct  7 19:56:42 2011] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:42 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Oct  7 19:56:42 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.040
[Fri Oct  7 19:56:42 2011] Giving source the simple spatial ID 71 for pass 0, mean size = 0.59"
[Fri Oct  7 19:56:44 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src71.ximg exists
[Fri Oct  7 19:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src71.csv
[Fri Oct  7 19:56:44 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src71_1.ximg exists
[Fri Oct  7 19:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src71.csv
[Fri Oct  7 19:56:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:46 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src71.ximg exists
[Fri Oct  7 19:56:46 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src71_1.ximg exists
[Fri Oct  7 19:56:46 2011] Fit fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src71 appears to have run properly
[Fri Oct  7 19:57:41 2011] Spatial fit model total counts = 21.139700, observed total counts = 21.000000
[Fri Oct  7 19:57:41 2011] Offset between fit and detection position for source 28 = 0.523927 pixels
[Fri Oct  7 19:57:41 2011] 21.081550 total counts/ 7.023550 bgd. counts: snr = 5.304509
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.523927 pixels
  Position = (944.0, 741.4) = 17 25 44.44 -34 26 1.0
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 14.1 +/- 4.6
  Background counts = 7.0
  Rate = 0.0003 +/- 0.0001
[Fri Oct  7 19:57:41 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:41 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:41 2011] Source does appear to be extended
[Fri Oct  7 19:57:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:47 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Fri Oct  7 19:58:47 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.806
[Fri Oct  7 19:58:47 2011] Giving source the simple spatial ID 69 for pass 1, mean size = 0.70"
[Fri Oct  7 19:58:49 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src69.ximg exists
[Fri Oct  7 19:58:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src69.csv
[Fri Oct  7 19:58:49 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src69_1.ximg exists
[Fri Oct  7 19:58:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src69.csv
[Fri Oct  7 19:58:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:58:51 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src69.ximg exists
[Fri Oct  7 19:58:51 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src69_1.ximg exists
[Fri Oct  7 19:58:51 2011] Fit fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src69 appears to have run properly
[Fri Oct  7 19:59:44 2011] Spatial fit model total counts = 20.995500, observed total counts = 22.000000
[Fri Oct  7 19:59:44 2011] Offset between fit and detection position for source 28 = 0.015819 pixels
[Fri Oct  7 19:59:44 2011] 20.838870 total counts/ 6.833370 bgd. counts: snr = 5.357734
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.015819 pixels
  Position = (944.0, 741.4) = 17 25 44.44 -34 26 1.0
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 14.0 +/- 4.6
  Background counts = 6.8
  Rate = 0.0003 +/- 0.0001
[Fri Oct  7 19:59:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:44 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:44 2011] Source does appear to be extended
[Fri Oct  7 19:59:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:09:13 2011] Not overwriting source region fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28_src.reg
[Fri Oct  7 20:09:13 2011] Extracting stamp from image fullrun_ccd2_acisf10987_pi14-548_cl_sm2.00.img.gz, (912, 709) - (976, 774)
[Fri Oct  7 20:09:13 2011] Writing fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28.gif
[Fri Oct  7 20:13:11 2011] ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28_src.evt and ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Fri Oct  7 20:13:11 2011] Size of ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28_src.evt.gz[events] = 16 counts
[Fri Oct  7 20:13:11 2011] Mean chipx,y = (232.88, 709.88)
[Fri Oct  7 20:13:11 2011] Mean tdetx,y = (3770.88, 3853.12)
[Fri Oct  7 20:13:11 2011] chipx,y range = (208.00-242.00, 687.00-722.00)
[Fri Oct  7 20:13:11 2011] Size of ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 18 counts
[Fri Oct  7 20:13:11 2011] ../../acisf10987/products/images/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28_src.img and ../../acisf10987/products/images/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Fri Oct  7 20:13:11 2011] ../../acisf10987/products/spectra/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28_src.pi and ../../acisf10987/products/spectra/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Fri Oct  7 20:13:11 2011] Not generating rmf since there are only 14 counts
[Fri Oct  7 20:13:13 2011] ../../acisf10987/products/lightcurves/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Fri Oct  7 20:16:07 2011] 188.125
[Fri Oct  7 20:23:20 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:20 2011] Error reading totcts from fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28_src.pi.gz
[Fri Oct  7 20:23:22 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:22 2011] Using photon index=1.80, rate=0.000346, arf fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src28.arf
[Fri Oct  7 20:23:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:22 2011] Updating source flux to 5.7e-15
[Fri Oct  7 20:23:59 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting