[Fri Oct  7 19:54:31 2011] Detection parameters:
  Position = (1145.3, 739.0) = 17 25 36.42 -34 26 2.0
  Extent = 0.5" x 0.5", rotation angle = 60 degrees
  Source counts = 41.1 +/- 6.6
  Background counts = 1.9
  Rate = 0.001 +/- 0.0002

[Fri Oct  7 19:54:36 2011] Off-axis axis estimate = 2.44'
[Fri Oct  7 19:56:42 2011] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:42 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Fri Oct  7 19:56:42 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.024
[Fri Oct  7 19:56:42 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 0.48"
[Fri Oct  7 19:56:44 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src25.ximg exists
[Fri Oct  7 19:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src25.csv
[Fri Oct  7 19:56:44 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src25_1.ximg exists
[Fri Oct  7 19:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src25.csv
[Fri Oct  7 19:56:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:45 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Fri Oct  7 19:56:46 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Oct  7 19:56:46 2011] Fit fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Oct  7 19:57:41 2011] Spatial fit model total counts = 45.443400, observed total counts = 46.000000
[Fri Oct  7 19:57:41 2011] Offset between fit and detection position for source 27 = 0.727428 pixels
[Fri Oct  7 19:57:41 2011] 45.053710 total counts/ 3.051410 bgd. counts: snr = 24.044890
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.727428 pixels
  Position = (1145.8, 739.5) = 17 25 36.42 -34 26 2.0
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 42.0 +/- 6.7
  Background counts = 3.1
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 19:57:41 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:41 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:41 2011] Source does appear to be extended
[Fri Oct  7 19:57:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:47 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Oct  7 19:58:47 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.817
[Fri Oct  7 19:58:47 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.57"
[Fri Oct  7 19:58:48 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src25.ximg exists
[Fri Oct  7 19:58:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src25.csv
[Fri Oct  7 19:58:48 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src25_1.ximg exists
[Fri Oct  7 19:58:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src25.csv
[Fri Oct  7 19:58:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:58:50 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Fri Oct  7 19:58:50 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Oct  7 19:58:50 2011] Fit fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Oct  7 19:59:44 2011] Spatial fit model total counts = 47.896500, observed total counts = 48.000000
[Fri Oct  7 19:59:44 2011] Offset between fit and detection position for source 27 = 0.016446 pixels
[Fri Oct  7 19:59:44 2011] 47.526610 total counts/ 6.273710 bgd. counts: snr = 16.469949
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.016446 pixels
  Position = (1145.8, 739.5) = 17 25 36.42 -34 26 2.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 41.3 +/- 6.9
  Background counts = 6.3
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 19:59:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:44 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:44 2011] Source does appear to be extended
[Fri Oct  7 19:59:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:09:12 2011] Not overwriting source region fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27_src.reg
[Fri Oct  7 20:09:12 2011] Extracting stamp from image fullrun_ccd2_acisf10987_pi14-548_cl_sm2.00.img.gz, (1120, 714) - (1171, 765)
[Fri Oct  7 20:09:12 2011] Writing fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27.gif
[Fri Oct  7 20:10:44 2011] ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27_src.evt and ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Fri Oct  7 20:10:45 2011] Size of ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27_src.evt.gz[events] = 43 counts
[Fri Oct  7 20:10:45 2011] Mean chipx,y = (23.42, 751.65)
[Fri Oct  7 20:10:45 2011] Mean tdetx,y = (3812.65, 4062.58)
[Fri Oct  7 20:10:45 2011] chipx,y range = (10.00-47.00, 734.00-770.00)
[Fri Oct  7 20:10:45 2011] Size of ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 14 counts
[Fri Oct  7 20:10:45 2011] ../../acisf10987/products/images/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27_src.img and ../../acisf10987/products/images/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Fri Oct  7 20:10:45 2011] ../../acisf10987/products/spectra/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27_src.pi and ../../acisf10987/products/spectra/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27_bgd.pi exist, delete to re-create
[Fri Oct  7 20:10:45 2011] Not generating rmf since there are only 41 counts
[Fri Oct  7 20:10:48 2011] ../../acisf10987/products/lightcurves/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Fri Oct  7 20:16:06 2011] 192.941
[Fri Oct  7 20:23:20 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:20 2011] Error reading totcts from fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27_src.pi.gz
[Fri Oct  7 20:23:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:21 2011] Using photon index=1.80, rate=0.00102, arf fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src27.arf
[Fri Oct  7 20:23:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:21 2011] Updating source flux to 1.6e-14
[Fri Oct  7 20:23:59 2011] Source 27 has fewer than 100.000000 counts, skipping spectral fitting