[Fri Oct  7 19:54:35 2011] Detection parameters:
  Position = (671.3, 737.3) = 17 25 55.27 -34 26 2.7
  Extent = 0.8" x 0.5", rotation angle = 117 degrees
  Source counts = 13.5 +/- 3.9
  Background counts = 1.5
  Rate = 0.0003 +/- 0.0001

[Fri Oct  7 19:54:36 2011] Off-axis axis estimate = 4.77'
[Fri Oct  7 19:56:42 2011] Using EEF radius (= 1.09 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:42 2011] Initial guess for spatial extent in simple fitting = 1.09"
[Fri Oct  7 19:56:42 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.847
[Fri Oct  7 19:56:42 2011] Giving source the simple spatial ID 75 for pass 0, mean size = 1.09"
[Fri Oct  7 19:56:45 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src75.ximg exists
[Fri Oct  7 19:56:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src75.csv
[Fri Oct  7 19:56:45 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src75_1.ximg exists
[Fri Oct  7 19:56:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src75.csv
[Fri Oct  7 19:56:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10987_pi14-548_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:46 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src75.ximg exists
[Fri Oct  7 19:56:46 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src75_1.ximg exists
[Fri Oct  7 19:56:46 2011] Fit fullrun_ccd2_acisf10987_pi14-548_cl_pass0_tfrozen_src75 appears to have run properly
[Fri Oct  7 19:57:41 2011] Spatial fit model total counts = 21.959200, observed total counts = 22.000000
[Fri Oct  7 19:57:41 2011] Offset between fit and detection position for source 106 = 1.009233 pixels
[Fri Oct  7 19:57:41 2011] 22.012000 total counts/ 10.207800 bgd. counts: snr = 3.694626
Spatial fit parameters:
  Offset between fit and detection position for source 106 = 1.009233 pixels
  Position = (671.7, 738.2) = 17 25 55.27 -34 26 2.5
  Extent = 0.7 (0.4-1.3)", rotation angle = 0
  Source counts = 11.8 +/- 4.7
  Background counts = 10.2
  Rate = 0.0003 +/- 0.0001
[Fri Oct  7 19:57:41 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:41 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:41 2011] Source does appear to be extended
[Fri Oct  7 19:57:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:47 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Fri Oct  7 19:58:47 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.062
[Fri Oct  7 19:58:47 2011] Giving source the simple spatial ID 73 for pass 1, mean size = 0.71"
[Fri Oct  7 19:58:49 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src73.ximg exists
[Fri Oct  7 19:58:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src73.csv
[Fri Oct  7 19:58:49 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src73_1.ximg exists
[Fri Oct  7 19:58:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src73.csv
[Fri Oct  7 19:58:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10987_pi14-548_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:58:51 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src73.ximg exists
[Fri Oct  7 19:58:51 2011] fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src73_1.ximg exists
[Fri Oct  7 19:58:51 2011] Fit fullrun_ccd2_acisf10987_pi14-548_cl_pass1_tfrozen_src73 appears to have run properly
[Fri Oct  7 19:59:44 2011] Spatial fit model total counts = 22.093700, observed total counts = 22.000000
[Fri Oct  7 19:59:44 2011] Offset between fit and detection position for source 106 = 0.035765 pixels
[Fri Oct  7 19:59:44 2011] 22.090700 total counts/ 10.081100 bgd. counts: snr = 3.782462
Spatial fit parameters:
  Offset between fit and detection position for source 106 = 0.035765 pixels
  Position = (671.7, 738.2) = 17 25 55.27 -34 26 2.5
  Extent = 0.7 (0.4-1.3)", rotation angle = 0
  Source counts = 12.0 +/- 4.7
  Background counts = 10.1
  Rate = 0.0003 +/- 0.0001
[Fri Oct  7 19:59:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:44 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:44 2011] Source does appear to be extended
[Fri Oct  7 19:59:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:09:13 2011] Not overwriting source region fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106_src.reg
[Fri Oct  7 20:09:13 2011] Extracting stamp from image fullrun_ccd2_acisf10987_pi14-548_cl_sm2.00.img.gz, (639, 705) - (705, 771)
[Fri Oct  7 20:09:13 2011] Writing fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106.gif
[Fri Oct  7 20:13:21 2011] ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106_src.evt and ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106_bgd.evt exist, delete to re-create
[Fri Oct  7 20:13:22 2011] Size of ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106_src.evt.gz[events] = 16 counts
[Fri Oct  7 20:13:22 2011] Mean chipx,y = (486.69, 637.94)
[Fri Oct  7 20:13:22 2011] Mean tdetx,y = (3698.94, 3599.31)
[Fri Oct  7 20:13:22 2011] chipx,y range = (473.00-504.00, 619.00-652.00)
[Fri Oct  7 20:13:22 2011] Size of ../../acisf10987/products/events/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106_bgd.evt.gz[events] = 15 counts
[Fri Oct  7 20:13:22 2011] ../../acisf10987/products/images/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106_src.img and ../../acisf10987/products/images/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106_bgd.img exist, delete to re-create
[Fri Oct  7 20:13:22 2011] ../../acisf10987/products/spectra/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106_src.pi and ../../acisf10987/products/spectra/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106_bgd.pi exist, delete to re-create
[Fri Oct  7 20:13:22 2011] Not generating rmf since there are only 12 counts
[Fri Oct  7 20:13:24 2011] ../../acisf10987/products/lightcurves/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106_bgd.lc exist, delete to re-create
[Fri Oct  7 20:16:07 2011] 181.013
[Fri Oct  7 20:23:20 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:20 2011] Error reading totcts from fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106_src.pi.gz
[Fri Oct  7 20:23:22 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:22 2011] Using photon index=1.80, rate=0.000296, arf fullrun_ccd2_acisf10987_pi14-548_pass1_cl_src106.arf
[Fri Oct  7 20:23:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:22 2011] Updating source flux to 5e-15
[Fri Oct  7 20:23:59 2011] Source 106 has fewer than 100.000000 counts, skipping spectral fitting