[Fri Oct  7 19:54:28 2011] Detection parameters:
  Position = (117.9, 336.0) = 17 25 27.65 -34 23 5.3
  Extent = 0.7" x 0.5", rotation angle = 62 degrees
  Source counts = 19.4 +/- 4.6
  Background counts = 1.6
  Rate = 0.0005 +/- 0.0001

[Fri Oct  7 19:54:29 2011] Off-axis axis estimate = 1.68'
[Fri Oct  7 19:56:39 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:39 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Oct  7 19:56:39 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.575
[Fri Oct  7 19:56:39 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.40"
[Fri Oct  7 19:56:40 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src27.ximg exists
[Fri Oct  7 19:56:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src27.csv
[Fri Oct  7 19:56:40 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src27_1.ximg exists
[Fri Oct  7 19:56:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src27.csv
[Fri Oct  7 19:56:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:41 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Fri Oct  7 19:56:41 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Oct  7 19:56:41 2011] Fit fullrun_ccd1_acisf10987_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Oct  7 19:57:30 2011] Spatial fit model total counts = 22.457100, observed total counts = 23.000000
[Fri Oct  7 19:57:30 2011] Offset between fit and detection position for source 31 = 0.916871 pixels
[Fri Oct  7 19:57:30 2011] 21.996920 total counts/ 2.069120 bgd. counts: snr = 13.853724
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.916871 pixels
  Position = (118.5, 336.7) = 17 25 27.64 -34 23 5.2
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 19.9 +/- 4.7
  Background counts = 2.1
  Rate = 0.0005 +/- 0.0001
[Fri Oct  7 19:57:30 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:30 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:30 2011] Source does appear to be extended
[Fri Oct  7 19:57:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:42 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Fri Oct  7 19:58:42 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.817
[Fri Oct  7 19:58:42 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 0.70"
[Fri Oct  7 19:58:44 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src27.ximg exists
[Fri Oct  7 19:58:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src27.csv
[Fri Oct  7 19:58:44 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src27_1.ximg exists
[Fri Oct  7 19:58:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src27.csv
[Fri Oct  7 19:58:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:58:46 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Fri Oct  7 19:58:46 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Oct  7 19:58:46 2011] Fit fullrun_ccd1_acisf10987_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Oct  7 19:59:34 2011] Spatial fit model total counts = 23.140800, observed total counts = 23.000000
[Fri Oct  7 19:59:34 2011] Offset between fit and detection position for source 31 = 0.115338 pixels
[Fri Oct  7 19:59:34 2011] 22.668010 total counts/ 1.801210 bgd. counts: snr = 15.547969
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.115338 pixels
  Position = (118.5, 336.6) = 17 25 27.65 -34 23 5.3
  Extent = 0.7 (0.6-1.1)", rotation angle = 0
  Source counts = 20.9 +/- 4.8
  Background counts = 1.8
  Rate = 0.0005 +/- 0.0001
[Fri Oct  7 19:59:34 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:34 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:34 2011] Source does appear to be extended
[Fri Oct  7 19:59:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:05:46 2011] Not overwriting source region fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31_src.reg
[Fri Oct  7 20:05:46 2011] Extracting stamp from image fullrun_ccd1_acisf10987_pi14-548_cl_sm2.00.img.gz, (85, 303) - (152, 371)
[Fri Oct  7 20:05:46 2011] Writing fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31.gif
[Fri Oct  7 20:07:07 2011] ../../acisf10987/products/events/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31_src.evt and ../../acisf10987/products/events/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Fri Oct  7 20:07:07 2011] Size of ../../acisf10987/products/events/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31_src.evt.gz[events] = 21 counts
[Fri Oct  7 20:07:07 2011] Mean chipx,y = (78.71, 915.00)
[Fri Oct  7 20:07:07 2011] Mean tdetx,y = (4217.00, 4185.71)
[Fri Oct  7 20:07:07 2011] chipx,y range = (62.00-93.00, 900.00-935.00)
[Fri Oct  7 20:07:07 2011] Size of ../../acisf10987/products/events/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 14 counts
[Fri Oct  7 20:07:07 2011] ../../acisf10987/products/images/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31_src.img and ../../acisf10987/products/images/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Fri Oct  7 20:07:07 2011] ../../acisf10987/products/spectra/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31_src.pi and ../../acisf10987/products/spectra/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Fri Oct  7 20:07:07 2011] Not generating rmf since there are only 20 counts
[Fri Oct  7 20:07:10 2011] ../../acisf10987/products/lightcurves/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Fri Oct  7 20:09:11 2011] 197.274
[Fri Oct  7 20:23:18 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:18 2011] Error reading totcts from fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31_src.pi.gz
[Fri Oct  7 20:23:19 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:19 2011] Using photon index=1.80, rate=0.000515, arf fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src31.arf
[Fri Oct  7 20:23:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:19 2011] Updating source flux to 8.1e-15
[Fri Oct  7 20:23:49 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting