[Fri Oct  7 19:54:27 2011] Detection parameters:
  Position = (51.8, 329.9) = 17 25 30.28 -34 23 8.3
  Extent = 0.5" x 0.5", rotation angle = 46 degrees
  Source counts = 18.9 +/- 4.7
  Background counts = 3.1
  Rate = 0.0005 +/- 0.0001

[Fri Oct  7 19:54:29 2011] Off-axis axis estimate = 1.15'
[Fri Oct  7 19:56:39 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:39 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct  7 19:56:39 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.615
[Fri Oct  7 19:56:39 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 0.38"
[Fri Oct  7 19:56:40 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src30.ximg exists
[Fri Oct  7 19:56:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src30.csv
[Fri Oct  7 19:56:40 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src30_1.ximg exists
[Fri Oct  7 19:56:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src30.csv
[Fri Oct  7 19:56:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:41 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Fri Oct  7 19:56:41 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Oct  7 19:56:41 2011] Fit fullrun_ccd1_acisf10987_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Fri Oct  7 19:57:30 2011] Spatial fit model total counts = 26.651400, observed total counts = 27.000000
[Fri Oct  7 19:57:30 2011] Offset between fit and detection position for source 30 = 1.508757 pixels
[Fri Oct  7 19:57:30 2011] 26.274200 total counts/ 12.180000 bgd. counts: snr = 4.038469
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.508757 pixels
  Position = (53.1, 330.7) = 17 25 30.24 -34 23 8.2
  Extent = 0.6 (0.4-1.1)", rotation angle = 0
  Source counts = 14.1 +/- 5.1
  Background counts = 12.2
  Rate = 0.0003 +/- 0.0001
[Fri Oct  7 19:57:30 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:30 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:30 2011] Source does appear to be extended
[Fri Oct  7 19:57:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:42 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Oct  7 19:58:42 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.122
[Fri Oct  7 19:58:42 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 0.56"
[Fri Oct  7 19:58:44 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src30.ximg exists
[Fri Oct  7 19:58:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src30.csv
[Fri Oct  7 19:58:44 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src30_1.ximg exists
[Fri Oct  7 19:58:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src30.csv
[Fri Oct  7 19:58:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:58:46 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Fri Oct  7 19:58:46 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Oct  7 19:58:46 2011] Fit fullrun_ccd1_acisf10987_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Fri Oct  7 19:59:34 2011] Spatial fit model total counts = 26.858900, observed total counts = 27.000000
[Fri Oct  7 19:59:34 2011] Offset between fit and detection position for source 30 = 0.011696 pixels
[Fri Oct  7 19:59:34 2011] 26.260100 total counts/ 12.806700 bgd. counts: snr = 3.759356
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.011696 pixels
  Position = (53.1, 330.7) = 17 25 30.24 -34 23 8.2
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 13.5 +/- 5.1
  Background counts = 12.8
  Rate = 0.0003 +/- 0.0001
[Fri Oct  7 19:59:34 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:34 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:34 2011] Source does appear to be extended
[Fri Oct  7 19:59:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:05:46 2011] Not overwriting source region fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30_src.reg
[Fri Oct  7 20:05:46 2011] Extracting stamp from image fullrun_ccd1_acisf10987_pi14-548_cl_sm2.00.img.gz, (27, 305) - (79, 357)
[Fri Oct  7 20:05:46 2011] Writing fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30.gif
[Fri Oct  7 20:07:18 2011] ../../acisf10987/products/events/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30_src.evt and ../../acisf10987/products/events/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Fri Oct  7 20:07:18 2011] Size of ../../acisf10987/products/events/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30_src.evt.gz[events] = 17 counts
[Fri Oct  7 20:07:18 2011] Mean chipx,y = (16.88, 939.24)
[Fri Oct  7 20:07:18 2011] Mean tdetx,y = (4192.76, 4123.88)
[Fri Oct  7 20:07:18 2011] chipx,y range = (2.00-33.00, 924.00-956.00)
[Fri Oct  7 20:07:18 2011] Size of ../../acisf10987/products/events/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 11 counts
[Fri Oct  7 20:07:18 2011] ../../acisf10987/products/images/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30_src.img and ../../acisf10987/products/images/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Fri Oct  7 20:07:18 2011] ../../acisf10987/products/spectra/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30_src.pi and ../../acisf10987/products/spectra/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Fri Oct  7 20:07:18 2011] Not generating rmf since there are only 13 counts
[Fri Oct  7 20:07:21 2011] ../../acisf10987/products/lightcurves/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Fri Oct  7 20:09:11 2011] 189.48
[Fri Oct  7 20:23:18 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:18 2011] Error reading totcts from fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30_src.pi.gz
[Fri Oct  7 20:23:19 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:19 2011] Using photon index=1.80, rate=0.000332, arf fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src30.arf
[Fri Oct  7 20:23:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:19 2011] Updating source flux to 5.5e-15
[Fri Oct  7 20:23:49 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting