[Fri Oct  7 19:54:27 2011] Detection parameters:
  Position = (177.1, 267.2) = 17 25 25.30 -34 23 39.2
  Extent = 0.7" x 0.5", rotation angle = 113 degrees
  Source counts = 17.8 +/- 4.5
  Background counts = 2.2
  Rate = 0.0004 +/- 0.0001

[Fri Oct  7 19:54:29 2011] Off-axis axis estimate = 2.08'
[Fri Oct  7 19:56:39 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:39 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Oct  7 19:56:39 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.774
[Fri Oct  7 19:56:39 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 0.44"
[Fri Oct  7 19:56:40 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src33.ximg exists
[Fri Oct  7 19:56:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src33.csv
[Fri Oct  7 19:56:40 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src33_1.ximg exists
[Fri Oct  7 19:56:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src33.csv
[Fri Oct  7 19:56:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10987_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:41 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Fri Oct  7 19:56:41 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Oct  7 19:56:41 2011] Fit fullrun_ccd1_acisf10987_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Oct  7 19:57:30 2011] Spatial fit model total counts = 24.991900, observed total counts = 25.000000
[Fri Oct  7 19:57:30 2011] Offset between fit and detection position for source 26 = 0.796521 pixels
[Fri Oct  7 19:57:30 2011] 25.707600 total counts/ 10.472400 bgd. counts: snr = 4.707876
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.796521 pixels
  Position = (177.9, 267.3) = 17 25 25.28 -34 23 39.4
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 15.2 +/- 5.1
  Background counts = 10.5
  Rate = 0.0004 +/- 0.0001
[Fri Oct  7 19:57:30 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:30 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:30 2011] Source does appear to be extended
[Fri Oct  7 19:57:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:42 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Oct  7 19:58:42 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.839
[Fri Oct  7 19:58:42 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 0.41"
[Fri Oct  7 19:58:44 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src33.ximg exists
[Fri Oct  7 19:58:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src33.csv
[Fri Oct  7 19:58:44 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src33_1.ximg exists
[Fri Oct  7 19:58:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src33.csv
[Fri Oct  7 19:58:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10987_pi14-548_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:58:46 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass1_tfrozen_src33.ximg exists
[Fri Oct  7 19:58:46 2011] fullrun_ccd1_acisf10987_pi14-548_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Oct  7 19:58:46 2011] Fit fullrun_ccd1_acisf10987_pi14-548_cl_pass1_tfrozen_src33 appears to have run properly
[Fri Oct  7 19:59:34 2011] Spatial fit model total counts = 24.976700, observed total counts = 25.000000
[Fri Oct  7 19:59:34 2011] Offset between fit and detection position for source 26 = 0.022444 pixels
[Fri Oct  7 19:59:34 2011] 25.345700 total counts/ 10.064200 bgd. counts: snr = 4.816997
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.022444 pixels
  Position = (177.9, 267.3) = 17 25 25.28 -34 23 39.4
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 15.3 +/- 5.0
  Background counts = 10.1
  Rate = 0.0004 +/- 0.0001
[Fri Oct  7 19:59:34 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:34 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:34 2011] Source does appear to be extended
[Fri Oct  7 19:59:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:05:46 2011] Not overwriting source region fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26_src.reg
[Fri Oct  7 20:05:46 2011] Extracting stamp from image fullrun_ccd1_acisf10987_pi14-548_cl_sm2.00.img.gz, (159, 249) - (197, 286)
[Fri Oct  7 20:05:46 2011] Writing fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26.gif
[Fri Oct  7 20:07:27 2011] ../../acisf10987/products/events/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26_src.evt and ../../acisf10987/products/events/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Fri Oct  7 20:07:27 2011] Size of ../../acisf10987/products/events/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26_src.evt.gz[events] = 16 counts
[Fri Oct  7 20:07:27 2011] Mean chipx,y = (154.00, 975.25)
[Fri Oct  7 20:07:27 2011] Mean tdetx,y = (4156.75, 4261.00)
[Fri Oct  7 20:07:27 2011] chipx,y range = (136.00-172.00, 956.00-988.00)
[Fri Oct  7 20:07:27 2011] Size of ../../acisf10987/products/events/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 11 counts
[Fri Oct  7 20:07:27 2011] ../../acisf10987/products/images/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26_src.img and ../../acisf10987/products/images/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Fri Oct  7 20:07:27 2011] ../../acisf10987/products/spectra/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26_src.pi and ../../acisf10987/products/spectra/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Fri Oct  7 20:07:27 2011] Not generating rmf since there are only 15 counts
[Fri Oct  7 20:07:30 2011] ../../acisf10987/products/lightcurves/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Fri Oct  7 20:09:11 2011] 202.722
[Fri Oct  7 20:23:18 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:18 2011] Error reading totcts from fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26_src.pi.gz
[Fri Oct  7 20:23:19 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:19 2011] Using photon index=1.80, rate=0.000377, arf fullrun_ccd1_acisf10987_pi14-548_pass1_cl_src26.arf
[Fri Oct  7 20:23:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:19 2011] Updating source flux to 5.8e-15
[Fri Oct  7 20:23:49 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting