[Fri Oct  7 19:54:25 2011] Detection parameters:
  Position = (332.7, 884.4) = 17 25 28.53 -34 26 51.9
  Extent = 0.7" x 0.5", rotation angle = 142 degrees
  Source counts = 15.0 +/- 4.1
  Background counts = 2.0
  Rate = 0.0004 +/- 0.0001

[Fri Oct  7 19:54:26 2011] Off-axis axis estimate = 3.55'
[Fri Oct  7 19:56:34 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:34 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Fri Oct  7 19:56:34 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.068
[Fri Oct  7 19:56:34 2011] Giving source the simple spatial ID 63 for pass 0, mean size = 0.71"
[Fri Oct  7 19:56:36 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src63.ximg exists
[Fri Oct  7 19:56:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src63.csv
[Fri Oct  7 19:56:36 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src63_1.ximg exists
[Fri Oct  7 19:56:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src63.csv
[Fri Oct  7 19:56:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:37 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass0_tfrozen_src63.ximg exists
[Fri Oct  7 19:56:37 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass0_tfrozen_src63_1.ximg exists
[Fri Oct  7 19:56:37 2011] Fit fullrun_ccd0_acisf10987_pi14-548_cl_pass0_tfrozen_src63 appears to have run properly
[Fri Oct  7 19:57:21 2011] Spatial fit model total counts = 23.497900, observed total counts = 24.000000
[Fri Oct  7 19:57:21 2011] Offset between fit and detection position for source 78 = 0.598853 pixels
[Fri Oct  7 19:57:21 2011] 24.426500 total counts/ 10.554100 bgd. counts: snr = 4.270129
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 0.598853 pixels
  Position = (333.2, 884.8) = 17 25 28.53 -34 26 52.0
  Extent = 0.8 (0.6-1.4)", rotation angle = 0
  Source counts = 13.9 +/- 4.9
  Background counts = 10.6
  Rate = 0.0003 +/- 0.0001
[Fri Oct  7 19:57:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:21 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:21 2011] Source does appear to be extended
[Fri Oct  7 19:57:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:39 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Fri Oct  7 19:58:39 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.875
[Fri Oct  7 19:58:39 2011] Giving source the simple spatial ID 60 for pass 1, mean size = 0.81"
[Fri Oct  7 19:58:41 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src60.ximg exists
[Fri Oct  7 19:58:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src60.csv
[Fri Oct  7 19:58:41 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src60_1.ximg exists
[Fri Oct  7 19:58:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src60.csv
[Fri Oct  7 19:58:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:58:42 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass1_tfrozen_src60.ximg exists
[Fri Oct  7 19:58:42 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass1_tfrozen_src60_1.ximg exists
[Fri Oct  7 19:58:42 2011] Fit fullrun_ccd0_acisf10987_pi14-548_cl_pass1_tfrozen_src60 appears to have run properly
[Fri Oct  7 19:59:27 2011] Spatial fit model total counts = 23.648100, observed total counts = 24.000000
[Fri Oct  7 19:59:27 2011] Offset between fit and detection position for source 78 = 0.024961 pixels
[Fri Oct  7 19:59:27 2011] 24.607500 total counts/ 10.752100 bgd. counts: snr = 4.225445
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 0.024961 pixels
  Position = (333.1, 884.8) = 17 25 28.53 -34 26 52.0
  Extent = 0.8 (0.6-1.4)", rotation angle = 0
  Source counts = 13.9 +/- 5.0
  Background counts = 10.8
  Rate = 0.0003 +/- 0.0001
[Fri Oct  7 19:59:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:27 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:27 2011] Source does appear to be extended
[Fri Oct  7 19:59:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:00:40 2011] Not overwriting source region fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78_src.reg
[Fri Oct  7 20:00:40 2011] Extracting stamp from image fullrun_ccd0_acisf10987_pi14-548_cl_sm2.00.img.gz, (296, 848) - (370, 922)
[Fri Oct  7 20:00:40 2011] Writing fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78.gif
[Fri Oct  7 20:04:58 2011] ../../acisf10987/products/events/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78_src.evt and ../../acisf10987/products/events/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78_bgd.evt exist, delete to re-create
[Fri Oct  7 20:04:58 2011] Size of ../../acisf10987/products/events/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78_src.evt.gz[events] = 22 counts
[Fri Oct  7 20:04:58 2011] Mean chipx,y = (859.95, 703.27)
[Fri Oct  7 20:04:58 2011] Mean tdetx,y = (3764.27, 4272.05)
[Fri Oct  7 20:04:58 2011] chipx,y range = (838.00-877.00, 682.00-721.00)
[Fri Oct  7 20:04:58 2011] Size of ../../acisf10987/products/events/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78_bgd.evt.gz[events] = 35 counts
[Fri Oct  7 20:04:58 2011] ../../acisf10987/products/images/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78_src.img and ../../acisf10987/products/images/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78_bgd.img exist, delete to re-create
[Fri Oct  7 20:04:58 2011] ../../acisf10987/products/spectra/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78_src.pi and ../../acisf10987/products/spectra/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78_bgd.pi exist, delete to re-create
[Fri Oct  7 20:04:58 2011] Not generating rmf since there are only 13 counts
[Fri Oct  7 20:05:02 2011] ../../acisf10987/products/lightcurves/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78_bgd.lc exist, delete to re-create
[Fri Oct  7 20:05:45 2011] 193.245
[Fri Oct  7 20:23:17 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:17 2011] Error reading totcts from fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78_src.pi.gz
[Fri Oct  7 20:23:18 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:18 2011] Using photon index=1.80, rate=0.000342, arf fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src78.arf
[Fri Oct  7 20:23:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:18 2011] Updating source flux to 5.5e-15
[Fri Oct  7 20:23:34 2011] Source 78 has fewer than 100.000000 counts, skipping spectral fitting