[Fri Oct  7 19:54:22 2011] Detection parameters:
  Position = (170.5, 777.4) = 17 25 34.98 -34 27 44.6
  Extent = 0.8" x 0.5", rotation angle = 166 degrees
  Source counts = 12.8 +/- 3.7
  Background counts = 1.2
  Rate = 0.0003 +/- 9e-05

[Fri Oct  7 19:54:26 2011] Off-axis axis estimate = 4.14'
[Fri Oct  7 19:56:34 2011] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:34 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Fri Oct  7 19:56:34 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.209
[Fri Oct  7 19:56:34 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 0.87"
[Fri Oct  7 19:56:35 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src33.ximg exists
[Fri Oct  7 19:56:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src33.csv
[Fri Oct  7 19:56:35 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src33_1.ximg exists
[Fri Oct  7 19:56:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src33.csv
[Fri Oct  7 19:56:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:37 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Fri Oct  7 19:56:37 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Oct  7 19:56:37 2011] Fit fullrun_ccd0_acisf10987_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Oct  7 19:57:21 2011] Spatial fit model total counts = 13.251000, observed total counts = 14.000000
[Fri Oct  7 19:57:21 2011] Offset between fit and detection position for source 33 = 0.937054 pixels
[Fri Oct  7 19:57:21 2011] 13.078693 total counts/ 0.055493 bgd. counts: snr = 55.283742
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.937054 pixels
  Position = (171.3, 777.9) = 17 25 34.97 -34 27 44.6
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 13.0 +/- 3.6
  Background counts = 0.1
  Rate = 0.0003 +/- 9e-05
[Fri Oct  7 19:57:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:21 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:21 2011] Source does appear to be extended
[Fri Oct  7 19:57:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:39 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Fri Oct  7 19:58:39 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.968
[Fri Oct  7 19:58:39 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 0.75"
[Fri Oct  7 19:58:40 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src33.ximg exists
[Fri Oct  7 19:58:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src33.csv
[Fri Oct  7 19:58:40 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src33_1.ximg exists
[Fri Oct  7 19:58:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src33.csv
[Fri Oct  7 19:58:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:58:41 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass1_tfrozen_src33.ximg exists
[Fri Oct  7 19:58:42 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Oct  7 19:58:42 2011] Fit fullrun_ccd0_acisf10987_pi14-548_cl_pass1_tfrozen_src33 appears to have run properly
[Fri Oct  7 19:59:27 2011] Spatial fit model total counts = 13.935300, observed total counts = 14.000000
[Fri Oct  7 19:59:27 2011] Offset between fit and detection position for source 33 = 0.150919 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.150919 pixels
  Position = (171.1, 777.9) = 17 25 34.97 -34 27 44.6
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 13.8 +/- 3.7
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Fri Oct  7 19:59:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:27 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:27 2011] Source does appear to be extended
[Fri Oct  7 19:59:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:00:39 2011] Not overwriting source region fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33_src.reg
[Fri Oct  7 20:00:39 2011] Extracting stamp from image fullrun_ccd0_acisf10987_pi14-548_cl_sm2.00.img.gz, (133, 740) - (209, 816)
[Fri Oct  7 20:00:39 2011] Writing fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33.gif
[Fri Oct  7 20:02:24 2011] ../../acisf10987/products/events/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33_src.evt and ../../acisf10987/products/events/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33_bgd.evt exist, delete to re-create
[Fri Oct  7 20:02:24 2011] Size of ../../acisf10987/products/events/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33_src.evt.gz[events] = 14 counts
[Fri Oct  7 20:02:24 2011] Mean chipx,y = (986.14, 556.07)
[Fri Oct  7 20:02:24 2011] Mean tdetx,y = (3617.07, 4145.86)
[Fri Oct  7 20:02:24 2011] chipx,y range = (970.00-1006.00, 539.00-572.00)
[Fri Oct  7 20:02:24 2011] Size of ../../acisf10987/products/events/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33_bgd.evt.gz[events] = 16 counts
[Fri Oct  7 20:02:24 2011] ../../acisf10987/products/images/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33_src.img and ../../acisf10987/products/images/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33_bgd.img exist, delete to re-create
[Fri Oct  7 20:02:24 2011] ../../acisf10987/products/spectra/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33_src.pi and ../../acisf10987/products/spectra/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33_bgd.pi exist, delete to re-create
[Fri Oct  7 20:02:24 2011] Not generating rmf since there are only 13 counts
[Fri Oct  7 20:02:27 2011] ../../acisf10987/products/lightcurves/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33_bgd.lc exist, delete to re-create
[Fri Oct  7 20:05:43 2011] 189.052
[Fri Oct  7 20:23:16 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:16 2011] Error reading totcts from fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33_src.pi.gz
[Fri Oct  7 20:23:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:17 2011] Using photon index=1.80, rate=0.000341, arf fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src33.arf
[Fri Oct  7 20:23:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:17 2011] Updating source flux to 5.6e-15
[Fri Oct  7 20:23:34 2011] Source 33 has fewer than 100.000000 counts, skipping spectral fitting