[Fri Oct  7 19:54:21 2011] Detection parameters:
  Position = (672.3, 668.0) = 17 25 15.01 -34 28 38.3
  Extent = 1.7" x 1.1", rotation angle = 152 degrees
  Source counts = 46.2 +/- 7.2
  Background counts = 5.8
  Rate = 0.001 +/- 0.0002

[Fri Oct  7 19:54:26 2011] Off-axis axis estimate = 6.56'
[Fri Oct  7 19:56:34 2011] Using EEF radius (= 1.92 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 19:56:34 2011] Initial guess for spatial extent in simple fitting = 1.92"
[Fri Oct  7 19:56:34 2011] source mask rpix=3.9, npix_max = 77, mask sum = 72, frac = 0.925
[Fri Oct  7 19:56:34 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.92"
[Fri Oct  7 19:56:35 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src11.ximg exists
[Fri Oct  7 19:56:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src11.csv
[Fri Oct  7 19:56:35 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Oct  7 19:56:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src11.csv
[Fri Oct  7 19:56:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10987_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:56:36 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Oct  7 19:56:36 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Oct  7 19:56:36 2011] Fit fullrun_ccd0_acisf10987_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Oct  7 19:57:21 2011] Spatial fit model total counts = 53.235800, observed total counts = 53.000000
[Fri Oct  7 19:57:21 2011] Offset between fit and detection position for source 11 = 0.563859 pixels
[Fri Oct  7 19:57:21 2011] 53.555460 total counts/ 8.092460 bgd. counts: snr = 15.981510
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.563859 pixels
  Position = (672.1, 668.5) = 17 25 15.04 -34 28 38.3
  Extent = 1.7 (1.2-2.1)", rotation angle = 0
  Source counts = 45.5 +/- 7.3
  Background counts = 8.1
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 19:57:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:21 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:21 2011] Source does appear to be extended
[Fri Oct  7 19:57:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 19:58:39 2011] Initial guess for spatial extent in simple fitting = 1.73"
[Fri Oct  7 19:58:39 2011] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.989
[Fri Oct  7 19:58:39 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 1.73"
[Fri Oct  7 19:58:40 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src11.ximg exists
[Fri Oct  7 19:58:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src11.csv
[Fri Oct  7 19:58:40 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Oct  7 19:58:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src11.csv
[Fri Oct  7 19:58:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10987_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:58:41 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Oct  7 19:58:41 2011] fullrun_ccd0_acisf10987_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Oct  7 19:58:41 2011] Fit fullrun_ccd0_acisf10987_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Oct  7 19:59:27 2011] Spatial fit model total counts = 49.449100, observed total counts = 50.000000
[Fri Oct  7 19:59:27 2011] Offset between fit and detection position for source 11 = 0.076344 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.076344 pixels
  Position = (672.1, 668.6) = 17 25 15.04 -34 28 38.3
  Extent = 1.8 (1.4-2.2)", rotation angle = 0
  Source counts = 49.5 +/- 7.0
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Fri Oct  7 19:59:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:27 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:27 2011] Source does appear to be extended
[Fri Oct  7 19:59:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:00:38 2011] Not overwriting source region fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11_src.reg
[Fri Oct  7 20:00:38 2011] Extracting stamp from image fullrun_ccd0_acisf10987_pi14-548_cl_sm2.00.img.gz, (588, 584) - (756, 753)
[Fri Oct  7 20:00:38 2011] Writing fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11.gif
[Fri Oct  7 20:01:16 2011] ../../acisf10987/products/events/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11_src.evt and ../../acisf10987/products/events/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Oct  7 20:01:16 2011] Size of ../../acisf10987/products/events/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11_src.evt.gz[events] = 57 counts
[Fri Oct  7 20:01:16 2011] Mean chipx,y = (472.12, 570.56)
[Fri Oct  7 20:01:16 2011] Mean tdetx,y = (3631.56, 4659.88)
[Fri Oct  7 20:01:16 2011] chipx,y range = (451.00-502.00, 550.00-593.00)
[Fri Oct  7 20:01:16 2011] Size of ../../acisf10987/products/events/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 108 counts
[Fri Oct  7 20:01:16 2011] ../../acisf10987/products/images/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11_src.img and ../../acisf10987/products/images/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Oct  7 20:01:16 2011] ../../acisf10987/products/spectra/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11_src.pi and ../../acisf10987/products/spectra/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Oct  7 20:01:16 2011] Not generating rmf since there are only 49 counts
[Fri Oct  7 20:01:19 2011] ../../acisf10987/products/lightcurves/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Oct  7 20:05:43 2011] 174.991
[Fri Oct  7 20:23:16 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:16 2011] Error reading totcts from fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Oct  7 20:23:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:17 2011] Using photon index=1.80, rate=0.00122, arf fullrun_ccd0_acisf10987_pi14-548_pass1_cl_src11.arf
[Fri Oct  7 20:23:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:17 2011] Updating source flux to 2.1e-14
[Fri Oct  7 20:23:34 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting