[Sat Oct 15 02:41:02 2011] Detection parameters:
  Position = (907.1, 833.6) = 1 29 30.21 -73 33 10.7
  Extent = 0.5" x 0.5", rotation angle = 60 degrees
  Source counts = 355.5 +/- 18.9
  Background counts = 2.5
  Rate = 0.01 +/- 0.0006

[Sat Oct 15 02:41:04 2011] Off-axis axis estimate = 1.97'
[Sat Oct 15 02:41:57 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 02:41:57 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Sat Oct 15 02:41:57 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.802
[Sat Oct 15 02:41:57 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.43"
[Sat Oct 15 02:41:57 2011] fullrun_ccd3_acisf10986_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 02:41:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10986_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 02:41:57 2011] fullrun_ccd3_acisf10986_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 02:41:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10986_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 02:41:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10986_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10986_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 02:41:57 2011] fullrun_ccd3_acisf10986_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 02:41:57 2011] fullrun_ccd3_acisf10986_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 02:41:57 2011] Fit fullrun_ccd3_acisf10986_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 02:42:07 2011] Spatial fit model total counts = 364.144000, observed total counts = 363.000000
[Sat Oct 15 02:42:07 2011] Offset between fit and detection position for source 1 = 0.708984 pixels
[Sat Oct 15 02:42:07 2011] 364.623600 total counts/ 19.403600 bgd. counts: snr = 78.370892
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.708984 pixels
  Position = (907.6, 834.1) = 1 29 30.21 -73 33 10.7
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 345.2 +/- 19.1
  Background counts = 19.4
  Rate = 0.01 +/- 0.0006
[Sat Oct 15 02:42:07 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 02:42:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 02:42:07 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 02:42:07 2011] Source does appear to be extended
[Sat Oct 15 02:42:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 02:42:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 02:42:25 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Sat Oct 15 02:42:25 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.067
[Sat Oct 15 02:42:25 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.47"
[Sat Oct 15 02:42:26 2011] fullrun_ccd3_acisf10986_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 02:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10986_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 02:42:26 2011] fullrun_ccd3_acisf10986_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 02:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10986_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 02:42:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10986_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10986_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 02:42:26 2011] fullrun_ccd3_acisf10986_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 02:42:26 2011] fullrun_ccd3_acisf10986_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 02:42:26 2011] Fit fullrun_ccd3_acisf10986_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 02:42:34 2011] Spatial fit model total counts = 364.144000, observed total counts = 363.000000
[Sat Oct 15 02:42:34 2011] Offset between fit and detection position for source 1 = 0.000000 pixels
[Sat Oct 15 02:42:34 2011] 364.623600 total counts/ 19.403600 bgd. counts: snr = 78.370892
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (907.6, 834.1) = 1 29 30.21 -73 33 10.7
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 345.2 +/- 19.1
  Background counts = 19.4
  Rate = 0.01 +/- 0.0006
[Sat Oct 15 02:42:34 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 02:42:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 02:42:34 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 02:42:34 2011] Source does appear to be extended
[Sat Oct 15 02:42:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 03:05:16 2011] Not overwriting source region fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 15 03:05:16 2011] Extracting stamp from image fullrun_ccd3_acisf10986_pi14-548_cl_sm2.00.img.gz, (886, 813) - (929, 856)
[Sat Oct 15 03:05:16 2011] Writing fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1.gif
[Sat Oct 15 03:05:17 2011] ../../acisf10986/products/events/fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1_src.evt and ../../acisf10986/products/events/fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 15 03:05:17 2011] Size of ../../acisf10986/products/events/fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1_src.evt.gz[events] = 350 counts
[Sat Oct 15 03:05:17 2011] Mean chipx,y = (811.33, 831.55)
[Sat Oct 15 03:05:17 2011] Mean tdetx,y = (4300.45, 3872.33)
[Sat Oct 15 03:05:17 2011] chipx,y range = (791.00-830.00, 814.00-850.00)
[Sat Oct 15 03:05:17 2011] Size of ../../acisf10986/products/events/fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 14 counts
[Sat Oct 15 03:05:17 2011] ../../acisf10986/products/images/fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1_src.img and ../../acisf10986/products/images/fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 15 03:05:17 2011] rmf not found, will run specextract
[Sat Oct 15 03:05:17 2011] arf not found, will run specextract
[Sat Oct 15 03:05:44 2011] ../../acisf10986/products/spectra/fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1.warf not found
[Sat Oct 15 03:05:44 2011] ../../acisf10986/products/spectra/fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1.wrmf not found
[Sat Oct 15 03:05:44 2011] Removal of ../../acisf10986/products/spectra/fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1.soff failed
[Sat Oct 15 03:05:50 2011] ../../acisf10986/products/lightcurves/fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1_src.lc and ../../acisf10986/products/lightcurves/fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 15 03:13:57 2011] Keeping rmf generated by specextract
[Sat Oct 15 03:13:57 2011] 199.621
[Sat Oct 15 03:14:01 2011] Updating aperture counts using extracted products
[Sat Oct 15 03:14:01 2011] Error reading totcts from fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 15 03:14:01 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 03:14:01 2011] Using photon index=1.80, rate=0.0103, arf fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 03:14:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 03:14:01 2011] Updating source flux to 1.2e-13
[Sat Oct 15 03:14:16 2011] Reading fit data from acisf10986/analysis//spectral/fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 15 03:14:16 2011] Spectral fit parameter nH value = 1.92055e+21
[Sat Oct 15 03:14:16 2011] Spectral fit parameter PhoIndex value = 2.11364
[Sat Oct 15 03:14:16 2011] Failed to get F(0.3-8.0) from acisf10986/analysis//spectral/fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 03:14:16 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 03:14:16 2011] Using Nh = 1.9e+21, photon index=2.11, rate=0.0103, arf fullrun_ccd3_acisf10986_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 03:14:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 03:14:16 2011] Updating source flux to 1e-13