[Wed Oct  5 02:57:52 2011] Detection parameters:
  Position = (751.0, 970.9) = 6 12 30.73 17 59 25.8
  Extent = 0.8" x 0.5", rotation angle = 173 degrees
  Source counts = 15.4 +/- 4.1
  Background counts = 1.6
  Rate = 0.0004 +/- 0.0001

[Wed Oct  5 02:57:54 2011] Off-axis axis estimate = 5.47'
[Wed Oct  5 03:01:38 2011] Using EEF radius (= 1.38 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:01:38 2011] Initial guess for spatial extent in simple fitting = 1.38"
[Wed Oct  5 03:01:38 2011] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.824
[Wed Oct  5 03:01:38 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 1.38"
[Wed Oct  5 03:01:40 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src31.ximg exists
[Wed Oct  5 03:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src31.csv
[Wed Oct  5 03:01:40 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src31_1.ximg exists
[Wed Oct  5 03:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src31.csv
[Wed Oct  5 03:01:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:01:41 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Wed Oct  5 03:01:41 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Oct  5 03:01:41 2011] Fit fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Wed Oct  5 03:02:26 2011] Spatial fit model total counts = 22.941900, observed total counts = 23.000000
[Wed Oct  5 03:02:26 2011] Offset between fit and detection position for source 74 = 0.391292 pixels
[Wed Oct  5 03:02:26 2011] 23.157350 total counts/ 4.215350 bgd. counts: snr = 9.225906
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 0.391292 pixels
  Position = (751.3, 970.7) = 6 12 30.74 17 59 25.5
  Extent = 1.1 (0.6-1.3)", rotation angle = 0
  Source counts = 18.9 +/- 4.8
  Background counts = 4.2
  Rate = 0.0005 +/- 0.0001
[Wed Oct  5 03:02:26 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:02:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:02:26 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:02:26 2011] Source does appear to be extended
[Wed Oct  5 03:02:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:03:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:03:24 2011] Initial guess for spatial extent in simple fitting = 1.05"
[Wed Oct  5 03:03:24 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.898
[Wed Oct  5 03:03:24 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 1.05"
[Wed Oct  5 03:03:29 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src31.ximg exists
[Wed Oct  5 03:03:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src31.csv
[Wed Oct  5 03:03:30 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src31_1.ximg exists
[Wed Oct  5 03:03:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src31.csv
[Wed Oct  5 03:03:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:03:31 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Wed Oct  5 03:03:31 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Oct  5 03:03:31 2011] Fit fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Wed Oct  5 03:04:06 2011] Spatial fit model total counts = 23.487700, observed total counts = 23.000000
[Wed Oct  5 03:04:06 2011] Offset between fit and detection position for source 74 = 0.951216 pixels
[Wed Oct  5 03:04:06 2011] 23.156310 total counts/ 9.127910 bgd. counts: snr = 4.643254
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 0.951216 pixels
  Position = (751.7, 971.6) = 6 12 30.73 17 59 25.9
  Extent = 0.7 (0.4-1.6)", rotation angle = 0
  Source counts = 14.0 +/- 4.8
  Background counts = 9.1
  Rate = 0.0004 +/- 0.0001
[Wed Oct  5 03:04:06 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:04:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:04:06 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:04:06 2011] Source does appear to be extended
[Wed Oct  5 03:04:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:55:52 2011] Not overwriting source region fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74_src.reg
[Wed Oct  5 03:55:52 2011] Extracting stamp from image fullrun_ccd3_acisf10983_pi14-548_cl_sm2.00.img.gz, (720, 940) - (784, 1003)
[Wed Oct  5 03:55:52 2011] Writing fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74.gif
[Wed Oct  5 04:10:10 2011] ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74_src.evt and ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74_bgd.evt exist, delete to re-create
[Wed Oct  5 04:10:10 2011] Size of ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74_src.evt.gz[events] = 20 counts
[Wed Oct  5 04:10:10 2011] Mean chipx,y = (300.85, 873.75)
[Wed Oct  5 04:10:10 2011] Mean tdetx,y = (4258.25, 3361.85)
[Wed Oct  5 04:10:10 2011] chipx,y range = (285.00-317.00, 854.00-893.00)
[Wed Oct  5 04:10:10 2011] Size of ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74_bgd.evt.gz[events] = 18 counts
[Wed Oct  5 04:10:10 2011] ../../acisf10983/products/images/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74_src.img and ../../acisf10983/products/images/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74_bgd.img exist, delete to re-create
[Wed Oct  5 04:10:10 2011] ../../acisf10983/products/spectra/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74_src.pi and ../../acisf10983/products/spectra/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74_bgd.pi exist, delete to re-create
[Wed Oct  5 04:10:10 2011] Not generating rmf since there are only 14 counts
[Wed Oct  5 04:10:34 2011] ../../acisf10983/products/lightcurves/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74_src.lc and ../../acisf10983/products/lightcurves/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74_bgd.lc exist, delete to re-create
[Wed Oct  5 04:26:20 2011] 177.68
[Wed Oct  5 04:28:10 2011] Updating aperture counts using extracted products
[Wed Oct  5 04:28:10 2011] Error reading totcts from fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74_src.pi.gz
[Wed Oct  5 04:28:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 04:28:17 2011] Using photon index=1.80, rate=0.00035, arf fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src74.arf
[Wed Oct  5 04:28:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 04:28:17 2011] Updating source flux to 5e-15
[Wed Oct  5 04:28:56 2011] Source 74 has fewer than 100.000000 counts, skipping spectral fitting