[Wed Oct  5 02:57:50 2011] Detection parameters:
  Position = (537.4, 662.2) = 6 12 38.10 17 56 54.0
  Extent = 0.7" x 0.5", rotation angle = 58 degrees
  Source counts = 10.5 +/- 3.5
  Background counts = 1.5
  Rate = 0.0003 +/- 9e-05

[Wed Oct  5 02:57:54 2011] Off-axis axis estimate = 4.75'
[Wed Oct  5 03:01:38 2011] Using EEF radius (= 1.08 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:01:38 2011] Initial guess for spatial extent in simple fitting = 1.08"
[Wed Oct  5 03:01:38 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.025
[Wed Oct  5 03:01:38 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 1.08"
[Wed Oct  5 03:01:41 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src47.ximg exists
[Wed Oct  5 03:01:41 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src47_1.ximg exists
[Wed Oct  5 03:01:41 2011] Fit fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src47 appears to have run properly
[Wed Oct  5 03:01:42 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src47.ximg exists
[Wed Oct  5 03:01:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src47.csv
[Wed Oct  5 03:01:42 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src47_1.ximg exists
[Wed Oct  5 03:01:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src47.csv
[Wed Oct  5 03:01:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:02:26 2011] Spatial fit model total counts = 13.922200, observed total counts = 17.000000
[Wed Oct  5 03:02:26 2011] Offset between fit and detection position for source 69 = 0.455370 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 0.455370 pixels
  Position = (537.8, 662.3) = 6 12 38.10 17 56 53.8
  Extent = 0.8 (0.7-1.3)", rotation angle = 0
  Source counts = 13.5 +/- 3.7
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Wed Oct  5 03:02:26 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:02:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:02:26 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:02:26 2011] Source does appear to be extended
[Wed Oct  5 03:02:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:03:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:03:24 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Wed Oct  5 03:03:24 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.906
[Wed Oct  5 03:03:24 2011] Giving source the simple spatial ID 46 for pass 1, mean size = 0.79"
[Wed Oct  5 03:03:30 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src46.ximg exists
[Wed Oct  5 03:03:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src46.csv
[Wed Oct  5 03:03:31 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src46_1.ximg exists
[Wed Oct  5 03:03:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src46.csv
[Wed Oct  5 03:03:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:03:32 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src46.ximg exists
[Wed Oct  5 03:03:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src46.csv
[Wed Oct  5 03:03:32 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src46_1.ximg exists
[Wed Oct  5 03:03:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src46.csv
[Wed Oct  5 03:03:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:04:06 2011] Spatial fit model total counts = 14.063700, observed total counts = 17.000000
[Wed Oct  5 03:04:06 2011] Offset between fit and detection position for source 69 = 0.412154 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 0.412154 pixels
  Position = (537.9, 662.7) = 6 12 38.10 17 56 54.0
  Extent = 1.3 (0.8-1.6)" x 0.5 (0.4-0.8)", rotation angle = 117 (94-136) degrees
  Source counts = 13.5 +/- 3.7
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Wed Oct  5 03:04:06 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:04:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:04:06 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:04:06 2011] Source does appear to be extended
[Wed Oct  5 03:04:06 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Wed Oct  5 03:55:53 2011] Not overwriting source region fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69_src.reg
[Wed Oct  5 03:55:53 2011] Extracting stamp from image fullrun_ccd3_acisf10983_pi14-548_cl_sm2.00.img.gz, (478, 603) - (598, 722)
[Wed Oct  5 03:55:53 2011] Writing fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69.gif
[Wed Oct  5 04:16:35 2011] ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69_src.evt and ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69_bgd.evt exist, delete to re-create
[Wed Oct  5 04:16:36 2011] Size of ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69_src.evt.gz[events] = 13 counts
[Wed Oct  5 04:16:36 2011] Mean chipx,y = (559.85, 605.54)
[Wed Oct  5 04:16:36 2011] Mean tdetx,y = (4526.46, 3620.85)
[Wed Oct  5 04:16:36 2011] chipx,y range = (548.00-573.00, 584.00-619.00)
[Wed Oct  5 04:16:36 2011] Size of ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69_bgd.evt.gz[events] = 71 counts
[Wed Oct  5 04:16:36 2011] ../../acisf10983/products/images/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69_src.img and ../../acisf10983/products/images/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69_bgd.img exist, delete to re-create
[Wed Oct  5 04:16:36 2011] ../../acisf10983/products/spectra/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69_src.pi and ../../acisf10983/products/spectra/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69_bgd.pi exist, delete to re-create
[Wed Oct  5 04:16:36 2011] Not generating rmf since there are only 13 counts
[Wed Oct  5 04:16:50 2011] ../../acisf10983/products/lightcurves/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69_src.lc and ../../acisf10983/products/lightcurves/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69_bgd.lc exist, delete to re-create
[Wed Oct  5 04:26:21 2011] 185.999
[Wed Oct  5 04:28:12 2011] Updating aperture counts using extracted products
[Wed Oct  5 04:28:12 2011] Error reading totcts from fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69_src.pi.gz
[Wed Oct  5 04:28:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 04:28:17 2011] Using photon index=1.80, rate=0.000338, arf fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src69.arf
[Wed Oct  5 04:28:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 04:28:17 2011] Updating source flux to 4.6e-15
[Wed Oct  5 04:28:56 2011] Source 69 has fewer than 100.000000 counts, skipping spectral fitting