[Wed Oct  5 02:57:49 2011] Detection parameters:
  Position = (45.6, 948.8) = 6 12 55.06 17 59 15.0
  Extent = 0.6" x 0.5", rotation angle = 5 degrees
  Source counts = 13.1 +/- 4.0
  Background counts = 2.9
  Rate = 0.0003 +/- 0.0001

[Wed Oct  5 02:57:54 2011] Off-axis axis estimate = 0.71'
[Wed Oct  5 03:01:38 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:01:38 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Oct  5 03:01:38 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.915
[Wed Oct  5 03:01:38 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 0.38"
[Wed Oct  5 03:01:40 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src35.ximg exists
[Wed Oct  5 03:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src35.csv
[Wed Oct  5 03:01:40 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src35_1.ximg exists
[Wed Oct  5 03:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src35.csv
[Wed Oct  5 03:01:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:01:41 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Wed Oct  5 03:01:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src35.csv
[Wed Oct  5 03:01:41 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Oct  5 03:01:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src35.csv
[Wed Oct  5 03:01:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:02:26 2011] Spatial fit model total counts = 16.838300, observed total counts = 18.000000
[Wed Oct  5 03:02:26 2011] Offset between fit and detection position for source 47 = 0.651535 pixels
[Wed Oct  5 03:02:26 2011] 16.594300 total counts/ 3.450700 bgd. counts: snr = 7.075559
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.651535 pixels
  Position = (45.9, 949.4) = 6 12 55.06 17 59 15.1
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 13.1 +/- 4.1
  Background counts = 3.5
  Rate = 0.0003 +/- 0.0001
[Wed Oct  5 03:02:26 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:02:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:02:26 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:02:26 2011] Source does appear to be extended
[Wed Oct  5 03:02:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:03:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:03:24 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Wed Oct  5 03:03:24 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.992
[Wed Oct  5 03:03:24 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 0.49"
[Wed Oct  5 03:03:30 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src35.ximg exists
[Wed Oct  5 03:03:30 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src35_1.ximg exists
[Wed Oct  5 03:03:30 2011] Fit fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src35 appears to have run properly
[Wed Oct  5 03:03:31 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Wed Oct  5 03:03:31 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Wed Oct  5 03:03:31 2011] Fit fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Wed Oct  5 03:04:06 2011] Spatial fit model total counts = 17.145900, observed total counts = 18.000000
[Wed Oct  5 03:04:06 2011] Offset between fit and detection position for source 47 = 0.089447 pixels
[Wed Oct  5 03:04:06 2011] 16.891030 total counts/ 3.305530 bgd. counts: snr = 7.472313
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.089447 pixels
  Position = (46.0, 949.4) = 6 12 55.06 17 59 15.1
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 13.6 +/- 4.1
  Background counts = 3.3
  Rate = 0.0003 +/- 0.0001
[Wed Oct  5 03:04:06 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:04:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:04:06 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:04:06 2011] Source does appear to be extended
[Wed Oct  5 03:04:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:55:52 2011] Not overwriting source region fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47_src.reg
[Wed Oct  5 03:55:52 2011] Extracting stamp from image fullrun_ccd3_acisf10983_pi14-548_cl_sm2.00.img.gz, (22, 926) - (70, 973)
[Wed Oct  5 03:55:53 2011] Writing fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47.gif
[Wed Oct  5 04:11:31 2011] ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47_src.evt and ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47_bgd.evt exist, delete to re-create
[Wed Oct  5 04:11:31 2011] Size of ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47_src.evt.gz[events] = 16 counts
[Wed Oct  5 04:11:31 2011] Mean chipx,y = (1002.69, 957.88)
[Wed Oct  5 04:11:31 2011] Mean tdetx,y = (4174.12, 4063.69)
[Wed Oct  5 04:11:31 2011] chipx,y range = (986.00-1022.00, 941.00-974.00)
[Wed Oct  5 04:11:31 2011] Size of ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47_bgd.evt.gz[events] = 16 counts
[Wed Oct  5 04:11:31 2011] ../../acisf10983/products/images/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47_src.img and ../../acisf10983/products/images/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47_bgd.img exist, delete to re-create
[Wed Oct  5 04:11:31 2011] ../../acisf10983/products/spectra/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47_src.pi and ../../acisf10983/products/spectra/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47_bgd.pi exist, delete to re-create
[Wed Oct  5 04:11:31 2011] Not generating rmf since there are only 13 counts
[Wed Oct  5 04:12:14 2011] ../../acisf10983/products/lightcurves/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47_src.lc and ../../acisf10983/products/lightcurves/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47_bgd.lc exist, delete to re-create
[Wed Oct  5 04:26:20 2011] 203.153
[Wed Oct  5 04:28:11 2011] Updating aperture counts using extracted products
[Wed Oct  5 04:28:11 2011] Error reading totcts from fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47_src.pi.gz
[Wed Oct  5 04:28:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 04:28:17 2011] Using photon index=1.80, rate=0.000339, arf fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src47.arf
[Wed Oct  5 04:28:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 04:28:17 2011] Updating source flux to 4.3e-15
[Wed Oct  5 04:28:56 2011] Source 47 has fewer than 100.000000 counts, skipping spectral fitting