[Wed Oct  5 02:57:46 2011] Detection parameters:
  Position = (362.0, 657.7) = 6 12 44.15 17 56 51.8
  Extent = 0.8" x 0.5", rotation angle = 55 degrees
  Source counts = 12.0 +/- 3.6
  Background counts = 1.0
  Rate = 0.0003 +/- 9e-05

[Wed Oct  5 02:57:54 2011] Off-axis axis estimate = 3.77'
[Wed Oct  5 03:01:38 2011] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:01:38 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Wed Oct  5 03:01:38 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.948
[Wed Oct  5 03:01:38 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 0.76"
[Wed Oct  5 03:01:40 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src41.ximg exists
[Wed Oct  5 03:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src41.csv
[Wed Oct  5 03:01:40 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src41_1.ximg exists
[Wed Oct  5 03:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src41.csv
[Wed Oct  5 03:01:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10983_pi14-548_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:01:42 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src41.ximg exists
[Wed Oct  5 03:01:42 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src41_1.ximg exists
[Wed Oct  5 03:01:42 2011] Fit fullrun_ccd3_acisf10983_pi14-548_cl_pass0_tfrozen_src41 appears to have run properly
[Wed Oct  5 03:02:26 2011] Spatial fit model total counts = 12.794400, observed total counts = 13.000000
[Wed Oct  5 03:02:26 2011] Offset between fit and detection position for source 20 = 1.059363 pixels
[Wed Oct  5 03:02:26 2011] 12.506067 total counts/ 0.079367 bgd. counts: snr = 44.109959
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.059363 pixels
  Position = (362.8, 658.5) = 6 12 44.14 17 56 51.9
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 12.4 +/- 3.5
  Background counts = 0.1
  Rate = 0.0003 +/- 9e-05
[Wed Oct  5 03:02:26 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:02:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:02:26 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:02:26 2011] Source does appear to be extended
[Wed Oct  5 03:02:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:03:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:03:24 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Wed Oct  5 03:03:24 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.798
[Wed Oct  5 03:03:24 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 0.58"
[Wed Oct  5 03:03:30 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src41.ximg exists
[Wed Oct  5 03:03:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src41.csv
[Wed Oct  5 03:03:30 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src41_1.ximg exists
[Wed Oct  5 03:03:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src41.csv
[Wed Oct  5 03:03:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10983_pi14-548_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:03:32 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src41.ximg exists
[Wed Oct  5 03:03:32 2011] fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src41_1.ximg exists
[Wed Oct  5 03:03:32 2011] Fit fullrun_ccd3_acisf10983_pi14-548_cl_pass1_tfrozen_src41 appears to have run properly
[Wed Oct  5 03:04:06 2011] Spatial fit model total counts = 12.776100, observed total counts = 13.000000
[Wed Oct  5 03:04:06 2011] Offset between fit and detection position for source 20 = 0.115428 pixels
[Wed Oct  5 03:04:06 2011] 12.342500 total counts/ 0.000000 bgd. counts: snr = 154804113124702.531250
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.115428 pixels
  Position = (362.9, 658.6) = 6 12 44.14 17 56 52.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 12.3 +/- 3.5
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Wed Oct  5 03:04:06 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:04:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:04:06 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:04:06 2011] Source does appear to be extended
[Wed Oct  5 03:04:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:55:53 2011] Not overwriting source region fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20_src.reg
[Wed Oct  5 03:55:53 2011] Extracting stamp from image fullrun_ccd3_acisf10983_pi14-548_cl_sm2.00.img.gz, (337, 632) - (389, 685)
[Wed Oct  5 03:55:53 2011] Writing fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20.gif
[Wed Oct  5 04:15:09 2011] ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20_src.evt and ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Wed Oct  5 04:15:09 2011] Size of ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20_src.evt.gz[events] = 12 counts
[Wed Oct  5 04:15:09 2011] Mean chipx,y = (728.75, 624.42)
[Wed Oct  5 04:15:09 2011] Mean tdetx,y = (4507.58, 3789.75)
[Wed Oct  5 04:15:09 2011] chipx,y range = (714.00-748.00, 604.00-638.00)
[Wed Oct  5 04:15:09 2011] Size of ../../acisf10983/products/events/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 13 counts
[Wed Oct  5 04:15:09 2011] ../../acisf10983/products/images/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20_src.img and ../../acisf10983/products/images/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Wed Oct  5 04:15:09 2011] ../../acisf10983/products/spectra/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20_src.pi and ../../acisf10983/products/spectra/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Wed Oct  5 04:15:09 2011] Not generating rmf since there are only 12 counts
[Wed Oct  5 04:15:28 2011] ../../acisf10983/products/lightcurves/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20_src.lc and ../../acisf10983/products/lightcurves/fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Wed Oct  5 04:26:21 2011] 192.783
[Wed Oct  5 04:28:11 2011] Updating aperture counts using extracted products
[Wed Oct  5 04:28:11 2011] Error reading totcts from fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20_src.pi.gz
[Wed Oct  5 04:28:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 04:28:17 2011] Using photon index=1.80, rate=0.000308, arf fullrun_ccd3_acisf10983_pi14-548_pass1_cl_src20.arf
[Wed Oct  5 04:28:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 04:28:17 2011] Updating source flux to 4.1e-15
[Wed Oct  5 04:28:56 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting