[Wed Oct  5 02:57:39 2011] Detection parameters:
  Position = (456.5, 422.3) = 6 12 45.54 18 3 19.8
  Extent = 0.7" x 0.5", rotation angle = 116 degrees
  Source counts = 12.7 +/- 3.7
  Background counts = 1.3
  Rate = 0.0003 +/- 9e-05

[Wed Oct  5 02:57:42 2011] Off-axis axis estimate = 3.95'
[Wed Oct  5 03:01:35 2011] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:01:35 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Wed Oct  5 03:01:35 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.075
[Wed Oct  5 03:01:35 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.82"
[Wed Oct  5 03:01:38 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass0_src17.ximg exists
[Wed Oct  5 03:01:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10983_pi14-548_cl_pass0_src17.csv
[Wed Oct  5 03:01:38 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass0_src17_1.ximg exists
[Wed Oct  5 03:01:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10983_pi14-548_cl_pass0_src17.csv
[Wed Oct  5 03:01:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10983_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10983_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:01:38 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Wed Oct  5 03:01:38 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Oct  5 03:01:38 2011] Fit fullrun_ccd2_acisf10983_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Oct  5 03:02:13 2011] Spatial fit model total counts = 17.988400, observed total counts = 18.000000
[Wed Oct  5 03:02:13 2011] Offset between fit and detection position for source 21 = 0.856965 pixels
[Wed Oct  5 03:02:13 2011] 18.151330 total counts/ 6.194730 bgd. counts: snr = 4.803928
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.856965 pixels
  Position = (457.3, 422.6) = 6 12 45.53 18 3 19.7
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 12.0 +/- 4.3
  Background counts = 6.2
  Rate = 0.0003 +/- 0.0001
[Wed Oct  5 03:02:13 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:02:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:02:13 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:02:13 2011] Source does appear to be extended
[Wed Oct  5 03:02:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:03:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:03:20 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Wed Oct  5 03:03:20 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.917
[Wed Oct  5 03:03:20 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.64"
[Wed Oct  5 03:03:23 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass1_src17.ximg exists
[Wed Oct  5 03:03:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10983_pi14-548_cl_pass1_src17.csv
[Wed Oct  5 03:03:23 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass1_src17_1.ximg exists
[Wed Oct  5 03:03:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10983_pi14-548_cl_pass1_src17.csv
[Wed Oct  5 03:03:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10983_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10983_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:03:24 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Wed Oct  5 03:03:24 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Oct  5 03:03:24 2011] Fit fullrun_ccd2_acisf10983_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Oct  5 03:03:56 2011] Spatial fit model total counts = 18.023600, observed total counts = 18.000000
[Wed Oct  5 03:03:56 2011] Offset between fit and detection position for source 21 = 0.023061 pixels
[Wed Oct  5 03:03:56 2011] 17.906630 total counts/ 6.002930 bgd. counts: snr = 4.858479
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.023061 pixels
  Position = (457.3, 422.7) = 6 12 45.53 18 3 19.7
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 11.9 +/- 4.2
  Background counts = 6.0
  Rate = 0.0003 +/- 0.0001
[Wed Oct  5 03:03:56 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:03:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:03:56 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:03:56 2011] Source does appear to be extended
[Wed Oct  5 03:03:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:42:05 2011] Not overwriting source region fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21_src.reg
[Wed Oct  5 03:42:05 2011] Extracting stamp from image fullrun_ccd2_acisf10983_pi14-548_cl_sm2.00.img.gz, (428, 394) - (486, 452)
[Wed Oct  5 03:42:05 2011] Writing fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21.gif
[Wed Oct  5 03:50:12 2011] ../../acisf10983/products/events/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21_src.evt and ../../acisf10983/products/events/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Wed Oct  5 03:50:12 2011] Size of ../../acisf10983/products/events/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21_src.evt.gz[events] = 14 counts
[Wed Oct  5 03:50:12 2011] Mean chipx,y = (371.64, 665.14)
[Wed Oct  5 03:50:12 2011] Mean tdetx,y = (3726.14, 3714.36)
[Wed Oct  5 03:50:12 2011] chipx,y range = (353.00-386.00, 643.00-679.00)
[Wed Oct  5 03:50:12 2011] Size of ../../acisf10983/products/events/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 14 counts
[Wed Oct  5 03:50:12 2011] ../../acisf10983/products/images/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21_src.img and ../../acisf10983/products/images/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Wed Oct  5 03:50:12 2011] ../../acisf10983/products/spectra/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21_src.pi and ../../acisf10983/products/spectra/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Wed Oct  5 03:50:12 2011] Not generating rmf since there are only 11 counts
[Wed Oct  5 03:50:30 2011] ../../acisf10983/products/lightcurves/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21_src.lc and ../../acisf10983/products/lightcurves/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Wed Oct  5 03:55:51 2011] 186.997
[Wed Oct  5 04:28:06 2011] Updating aperture counts using extracted products
[Wed Oct  5 04:28:06 2011] Error reading totcts from fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21_src.pi.gz
[Wed Oct  5 04:28:08 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 04:28:08 2011] Using photon index=1.80, rate=0.000297, arf fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src21.arf
[Wed Oct  5 04:28:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 04:28:08 2011] Updating source flux to 4e-15
[Wed Oct  5 04:28:45 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting