[Wed Oct  5 02:57:38 2011] Detection parameters:
  Position = (197.5, 135.6) = 6 12 54.48 18 0 58.8
  Extent = 0.5" x 0.5", rotation angle = 143 degrees
  Source counts = 10.4 +/- 3.3
  Background counts = 0.6
  Rate = 0.0003 +/- 8e-05

[Wed Oct  5 02:57:42 2011] Off-axis axis estimate = 1.11'
[Wed Oct  5 03:01:35 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:01:35 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Oct  5 03:01:35 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.387
[Wed Oct  5 03:01:35 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.38"
[Wed Oct  5 03:01:38 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass0_src20.ximg exists
[Wed Oct  5 03:01:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10983_pi14-548_cl_pass0_src20.csv
[Wed Oct  5 03:01:38 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass0_src20_1.ximg exists
[Wed Oct  5 03:01:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10983_pi14-548_cl_pass0_src20.csv
[Wed Oct  5 03:01:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10983_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10983_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:01:38 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Wed Oct  5 03:01:38 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Oct  5 03:01:38 2011] Fit fullrun_ccd2_acisf10983_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Wed Oct  5 03:02:13 2011] Spatial fit model total counts = 13.746500, observed total counts = 14.000000
[Wed Oct  5 03:02:13 2011] Offset between fit and detection position for source 13 = 0.685357 pixels
[Wed Oct  5 03:02:13 2011] 14.069260 total counts/ 3.273560 bgd. counts: snr = 5.966789
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.685357 pixels
  Position = (198.0, 136.1) = 6 12 54.48 18 0 58.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 10.8 +/- 3.8
  Background counts = 3.3
  Rate = 0.0003 +/- 9e-05
[Wed Oct  5 03:02:13 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:02:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:02:13 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:02:13 2011] Source does appear to be extended
[Wed Oct  5 03:02:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:03:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:03:20 2011] Initial guess for spatial extent in simple fitting = 0.36"
[Wed Oct  5 03:03:20 2011] source mask rpix=0.7, npix_max = 6, mask sum = 4, frac = 0.656
[Wed Oct  5 03:03:20 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.36"
[Wed Oct  5 03:03:23 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass1_src20.ximg exists
[Wed Oct  5 03:03:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10983_pi14-548_cl_pass1_src20.csv
[Wed Oct  5 03:03:23 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass1_src20_1.ximg exists
[Wed Oct  5 03:03:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10983_pi14-548_cl_pass1_src20.csv
[Wed Oct  5 03:03:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10983_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10983_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:03:24 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Wed Oct  5 03:03:24 2011] fullrun_ccd2_acisf10983_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Oct  5 03:03:24 2011] Fit fullrun_ccd2_acisf10983_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Wed Oct  5 03:03:56 2011] Spatial fit model total counts = 14.838900, observed total counts = 15.000000
[Wed Oct  5 03:03:56 2011] Offset between fit and detection position for source 13 = 0.021723 pixels
[Wed Oct  5 03:03:56 2011] 15.074860 total counts/ 4.396060 bgd. counts: snr = 5.093199
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.021723 pixels
  Position = (198.0, 136.1) = 6 12 54.48 18 0 58.8
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 10.7 +/- 3.9
  Background counts = 4.4
  Rate = 0.0003 +/- 0.0001
[Wed Oct  5 03:03:56 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:03:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:03:56 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:03:56 2011] Source does appear to be extended
[Wed Oct  5 03:03:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:42:05 2011] Not overwriting source region fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13_src.reg
[Wed Oct  5 03:42:05 2011] Extracting stamp from image fullrun_ccd2_acisf10983_pi14-548_cl_sm2.00.img.gz, (182, 120) - (214, 153)
[Wed Oct  5 03:42:05 2011] Writing fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13.gif
[Wed Oct  5 03:51:22 2011] ../../acisf10983/products/events/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13_src.evt and ../../acisf10983/products/events/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Wed Oct  5 03:51:22 2011] Size of ../../acisf10983/products/events/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13_src.evt.gz[events] = 11 counts
[Wed Oct  5 03:51:22 2011] Mean chipx,y = (65.18, 910.64)
[Wed Oct  5 03:51:22 2011] Mean tdetx,y = (3971.64, 4020.82)
[Wed Oct  5 03:51:22 2011] chipx,y range = (53.00-83.00, 893.00-924.00)
[Wed Oct  5 03:51:22 2011] Size of ../../acisf10983/products/events/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 6 counts
[Wed Oct  5 03:51:22 2011] ../../acisf10983/products/images/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13_src.img and ../../acisf10983/products/images/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Wed Oct  5 03:51:22 2011] ../../acisf10983/products/spectra/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13_src.pi and ../../acisf10983/products/spectra/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Wed Oct  5 03:51:22 2011] Not generating rmf since there are only 10 counts
[Wed Oct  5 03:51:52 2011] ../../acisf10983/products/lightcurves/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13_src.lc and ../../acisf10983/products/lightcurves/fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Wed Oct  5 03:55:51 2011] 201.485
[Wed Oct  5 04:28:06 2011] Updating aperture counts using extracted products
[Wed Oct  5 04:28:06 2011] Error reading totcts from fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13_src.pi.gz
[Wed Oct  5 04:28:08 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 04:28:08 2011] Using photon index=1.80, rate=0.000267, arf fullrun_ccd2_acisf10983_pi14-548_pass1_cl_src13.arf
[Wed Oct  5 04:28:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 04:28:08 2011] Updating source flux to 3.4e-15
[Wed Oct  5 04:28:45 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting