[Wed Oct  5 02:57:34 2011] Detection parameters:
  Position = (433.4, 429.2) = 6 13 17.09 17 53 45.0
  Extent = 0.9" x 0.7", rotation angle = 30 degrees
  Source counts = 208.1 +/- 15.5
  Background counts = 30.9
  Rate = 0.005 +/- 0.0004

[Wed Oct  5 02:57:37 2011] Off-axis axis estimate = 8.29'
[Wed Oct  5 03:01:33 2011] Using EEF radius (= 3.03 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:01:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 03:01:33 2011] Initial guess for spatial extent in simple fitting = 3.03"
[Wed Oct  5 03:01:33 2011] source mask rpix=6.2, npix_max = 177, mask sum = 156, frac = 0.877
[Wed Oct  5 03:01:33 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.03"
[Wed Oct  5 03:01:34 2011] fullrun_ccd1_acisf10983_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct  5 03:01:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10983_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 03:01:34 2011] fullrun_ccd1_acisf10983_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct  5 03:01:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10983_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 03:01:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10983_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10983_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:01:35 2011] fullrun_ccd1_acisf10983_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 03:01:35 2011] fullrun_ccd1_acisf10983_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 03:01:35 2011] Fit fullrun_ccd1_acisf10983_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 03:02:09 2011] Spatial fit model total counts = 334.183000, observed total counts = 323.000000
[Wed Oct  5 03:02:09 2011] Offset between fit and detection position for source 4 = 0.522492 pixels
[Wed Oct  5 03:02:09 2011] 334.116400 total counts/ 69.649400 bgd. counts: snr = 31.689311
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.522492 pixels
  Position = (433.1, 429.6) = 6 13 17.12 17 53 45.0
  Extent = 2.5 (2.2-2.8)", rotation angle = 0
  Source counts = 264.5 +/- 18.3
  Background counts = 69.6
  Rate = 0.007 +/- 0.0005
[Wed Oct  5 03:02:09 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:02:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:02:09 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:02:09 2011] Source does appear to be extended
[Wed Oct  5 03:02:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:03:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:03:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 03:03:17 2011] Initial guess for spatial extent in simple fitting = 2.51"
[Wed Oct  5 03:03:17 2011] source mask rpix=5.1, npix_max = 125, mask sum = 121, frac = 0.967
[Wed Oct  5 03:03:17 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.51"
[Wed Oct  5 03:03:19 2011] fullrun_ccd1_acisf10983_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct  5 03:03:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10983_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 03:03:19 2011] fullrun_ccd1_acisf10983_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct  5 03:03:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10983_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 03:03:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10983_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10983_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:03:19 2011] fullrun_ccd1_acisf10983_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 03:03:19 2011] fullrun_ccd1_acisf10983_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 03:03:19 2011] Fit fullrun_ccd1_acisf10983_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 03:03:52 2011] Spatial fit model total counts = 317.612000, observed total counts = 306.000000
[Wed Oct  5 03:03:52 2011] Offset between fit and detection position for source 4 = 0.040152 pixels
[Wed Oct  5 03:03:52 2011] 317.894500 total counts/ 65.779500 bgd. counts: snr = 31.085181
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.040152 pixels
  Position = (433.1, 429.6) = 6 13 17.12 17 53 45.0
  Extent = 2.4 (2.1-2.7)", rotation angle = 0
  Source counts = 252.1 +/- 17.8
  Background counts = 65.8
  Rate = 0.006 +/- 0.0004
[Wed Oct  5 03:03:52 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:03:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:03:52 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:03:52 2011] Source does appear to be extended
[Wed Oct  5 03:03:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:17:55 2011] Not overwriting source region fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_src.reg
[Wed Oct  5 03:17:55 2011] Extracting stamp from image fullrun_ccd1_acisf10983_pi14-548_cl_sm2.00.img.gz, (324, 321) - (542, 539)
[Wed Oct  5 03:17:55 2011] Writing fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4.gif
[Wed Oct  5 03:18:10 2011] ../../acisf10983/products/events/fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_src.evt and ../../acisf10983/products/events/fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Wed Oct  5 03:18:10 2011] Size of ../../acisf10983/products/events/fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_src.evt.gz[events] = 294 counts
[Wed Oct  5 03:18:10 2011] Mean chipx,y = (685.10, 382.60)
[Wed Oct  5 03:18:10 2011] Mean tdetx,y = (4749.40, 4792.10)
[Wed Oct  5 03:18:10 2011] chipx,y range = (654.00-717.00, 348.00-412.00)
[Wed Oct  5 03:18:11 2011] Size of ../../acisf10983/products/events/fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 178 counts
[Wed Oct  5 03:18:11 2011] ../../acisf10983/products/images/fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_src.img and ../../acisf10983/products/images/fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Wed Oct  5 03:18:11 2011] ../../acisf10983/products/spectra/fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_src.pi and ../../acisf10983/products/spectra/fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Wed Oct  5 03:19:27 2011] ../../acisf10983/products/lightcurves/fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_src.lc and ../../acisf10983/products/lightcurves/fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Wed Oct  5 03:42:02 2011] Keeping rmf generated by specextract
[Wed Oct  5 03:42:02 2011] 164.086
[Wed Oct  5 04:28:03 2011] Updating aperture counts using extracted products
[Wed Oct  5 04:28:03 2011] Error reading totcts from fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Oct  5 04:28:05 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 04:28:05 2011] Using photon index=1.80, rate=0.00629, arf fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4.arf
[Wed Oct  5 04:28:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 04:28:05 2011] Updating source flux to 9.6e-14
[Wed Oct  5 04:28:45 2011] Reading fit data from acisf10983/analysis//spectral/fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_pl.csv
[Wed Oct  5 04:28:45 2011] Spectral fit parameter nH value = 5.49304e+21
[Wed Oct  5 04:28:45 2011] Spectral fit parameter PhoIndex value = 2.03775
[Wed Oct  5 04:28:45 2011] Failed to get F(0.3-8.0) from acisf10983/analysis//spectral/fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 04:28:45 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 04:28:45 2011] Using Nh = 5.5e+21, photon index=2.04, rate=0.00629, arf fullrun_ccd1_acisf10983_pi14-548_pass1_cl_src4.arf
[Wed Oct  5 04:28:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 04:28:45 2011] Updating source flux to 8.6e-14