[Wed Oct  5 02:57:30 2011] Detection parameters:
  Position = (708.6, 1024.2) = 6 13 12.59 18 7 6.0
  Extent = 2.5" x 2.1", rotation angle = 152 degrees
  Source counts = 244.3 +/- 17.3
  Background counts = 54.7
  Rate = 0.006 +/- 0.0004

[Wed Oct  5 02:57:33 2011] Off-axis axis estimate = 8.50'
[Wed Oct  5 03:01:31 2011] Using EEF radius (= 3.20 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:01:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 03:01:31 2011] Initial guess for spatial extent in simple fitting = 3.20"
[Wed Oct  5 03:01:31 2011] source mask rpix=6.5, npix_max = 195, mask sum = 196, frac = 1.002
[Wed Oct  5 03:01:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.20"
[Wed Oct  5 03:01:32 2011] fullrun_ccd0_acisf10983_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct  5 03:01:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10983_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 03:01:32 2011] fullrun_ccd0_acisf10983_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct  5 03:01:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10983_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 03:01:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10983_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10983_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:01:32 2011] fullrun_ccd0_acisf10983_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 03:01:32 2011] fullrun_ccd0_acisf10983_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 03:01:32 2011] Fit fullrun_ccd0_acisf10983_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 03:02:02 2011] Spatial fit model total counts = 284.999000, observed total counts = 285.000000
[Wed Oct  5 03:02:02 2011] Offset between fit and detection position for source 1 = 0.919183 pixels
[Wed Oct  5 03:02:02 2011] 283.875000 total counts/ 65.106000 bgd. counts: snr = 27.112856
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.919183 pixels
  Position = (709.4, 1024.7) = 6 13 12.58 18 7 6.0
  Extent = 3.0 (2.7-3.3)", rotation angle = 0
  Source counts = 218.8 +/- 16.8
  Background counts = 65.1
  Rate = 0.005 +/- 0.0004
[Wed Oct  5 03:02:02 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:02:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:02:02 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:02:02 2011] Source does appear to be extended
[Wed Oct  5 03:02:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:03:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:03:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 03:03:15 2011] Initial guess for spatial extent in simple fitting = 2.97"
[Wed Oct  5 03:03:15 2011] source mask rpix=6.0, npix_max = 171, mask sum = 169, frac = 0.988
[Wed Oct  5 03:03:15 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.97"
[Wed Oct  5 03:03:16 2011] fullrun_ccd0_acisf10983_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct  5 03:03:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10983_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 03:03:16 2011] fullrun_ccd0_acisf10983_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct  5 03:03:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10983_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 03:03:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10983_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10983_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:03:17 2011] fullrun_ccd0_acisf10983_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 03:03:17 2011] fullrun_ccd0_acisf10983_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 03:03:17 2011] Fit fullrun_ccd0_acisf10983_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 03:03:46 2011] Spatial fit model total counts = 279.000000, observed total counts = 279.000000
[Wed Oct  5 03:03:46 2011] Offset between fit and detection position for source 1 = 0.058883 pixels
[Wed Oct  5 03:03:46 2011] 277.776100 total counts/ 63.202100 bgd. counts: snr = 26.990526
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.058883 pixels
  Position = (709.5, 1024.7) = 6 13 12.58 18 7 6.0
  Extent = 2.9 (2.6-3.2)", rotation angle = 0
  Source counts = 214.6 +/- 16.7
  Background counts = 63.2
  Rate = 0.005 +/- 0.0004
[Wed Oct  5 03:03:46 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 03:03:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 03:03:46 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 03:03:46 2011] Source does appear to be extended
[Wed Oct  5 03:03:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 03:04:52 2011] Not overwriting source region fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_src.reg
[Wed Oct  5 03:04:52 2011] Extracting stamp from image fullrun_ccd0_acisf10983_pi14-548_cl_sm2.00.img.gz, (575, 890) - (844, 1159)
[Wed Oct  5 03:04:52 2011] Writing fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1.gif
[Wed Oct  5 03:04:53 2011] ../../acisf10983/products/events/fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_src.evt and ../../acisf10983/products/events/fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct  5 03:04:53 2011] Size of ../../acisf10983/products/events/fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_src.evt.gz[events] = 265 counts
[Wed Oct  5 03:04:53 2011] Mean chipx,y = (702.61, 91.06)
[Wed Oct  5 03:04:53 2011] Mean tdetx,y = (3152.06, 4429.39)
[Wed Oct  5 03:04:53 2011] chipx,y range = (668.00-735.00, 58.00-127.00)
[Wed Oct  5 03:04:53 2011] Size of ../../acisf10983/products/events/fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 291 counts
[Wed Oct  5 03:04:53 2011] ../../acisf10983/products/images/fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_src.img and ../../acisf10983/products/images/fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct  5 03:04:53 2011] ../../acisf10983/products/spectra/fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_src.pi and ../../acisf10983/products/spectra/fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct  5 03:05:58 2011] ../../acisf10983/products/lightcurves/fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_src.lc and ../../acisf10983/products/lightcurves/fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct  5 03:17:51 2011] Keeping rmf generated by specextract
[Wed Oct  5 03:17:51 2011] 165.998
[Wed Oct  5 04:28:02 2011] Updating aperture counts using extracted products
[Wed Oct  5 04:28:02 2011] Error reading totcts from fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct  5 04:28:03 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 04:28:03 2011] Using photon index=1.80, rate=0.00536, arf fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 04:28:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 04:28:03 2011] Updating source flux to 8e-14
[Wed Oct  5 04:28:34 2011] Reading fit data from acisf10983/analysis//spectral/fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct  5 04:28:34 2011] Spectral fit parameter nH value = 3.12221e+22
[Wed Oct  5 04:28:34 2011] Spectral fit parameter PhoIndex value = 2.09817
[Wed Oct  5 04:28:34 2011] Failed to get F(0.3-8.0) from acisf10983/analysis//spectral/fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 04:28:34 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 04:28:34 2011] Using Nh = 3.1e+22, photon index=2.10, rate=0.00536, arf fullrun_ccd0_acisf10983_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 04:28:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 04:28:34 2011] Updating source flux to 1.2e-13