Source List

Observation details report
Detailed source parameters (including errors) in a comma-separated values file

Click on source number for detailed analysis, including spectral fits if applicable

data idnum idradec telescope instrument x y cnts cntserr rate rateerr SNR poisprob sigmaj sigmin incang offax cnts_soft cnts_hard hr hr_err ext var N_H flux vign flags
Report srcpi bgdpi arf rmf 1 X013647.69+412416.2 chandra ccd7 791.091 131.455 714.941 27.5537 0.0499874 0.0019265 146.575 1 0.406984 0.406984 0 0.233955 F F 6.79e+20 4.10395e-13 1 dsxf
Report srcpi bgdpi arf 3 X013642.95+412413.7 chandra ccd7 899.5 126.515 23.555 7.11791 0.00164692 0.000497672 4.82916 0.999992 0.103719 0.103719 0 0.736211 F F 6.8e+20 1.24551e-14 1 dsx
Report srcpi bgdpi arf 2 X013715.98+412629.5 chandra ccd7 144.547 403.009 36.0659 6.00549 0.00252166 0.000419893 7.3941 1 2.4933 1.29629 90.7753 5.98758 F F 6.77e+20 2.08651e-14 1 dsx
Report srcpi bgdpi arf 1 X013614.51+412230.9 chandra ccd6 556.277 257.056 26.3344 5.7282 0.00184125 0.000400505 10.3468 1 2.80875 0.918649 343.086 6.26159 F F 6.84e+20 2.0001e-14 1 dsx

counts and rate are bgd.-subtracted, based on simple spatial fitting (if done) or extracted counts from aperture otherwise (N.B., in either case aperture counts are given csv file).
cntserr, rateerr = Error on (source) counts and count rate, based on error in total counts
SNR = signal-to-noise ratio, computed using Nsrc/sqrt(Nbgd)
poisprob = Poisson probability of observing total counts given bgd. counts
sigmaj, sigmin = source extent (from detection output or spatial fitting) in units of arcsecs.
incang = position angle of source (inclination from x-axis)
cnts_soft = bgd.-subtracted counts in soft band (0.50 - 2.00 KeV, always taken directly from source aperture rather than model fitting)
cnts_hard = bgd.-subtracted counts in hard band (2.00 - 7.99 KeV, always taken directly from source aperture rather than model fitting)
hr, hr_err = hardness ratio ([cnts_hard-cnts_soft]/[cnts_hard+cnts_soft]) and error
ext = source extension flag: F = false (not extended), T = true (extended), A = asymetric (ratio of sigmaj/sigmin > 1 + x, where x = 0.5 by default)
var = variability flag: U = unknown, F = false (is not variable), T = true
N_H = Galactic column density as determined from LHEASOFT nh program
flux = flux determined from count rate using pimms (in the 0.30-8.00 keV bandpass for a power-law model with ph. index = 1.8)
vign = vignetting correction
Flags: d = detection parameters, s = simple spatial fitting parameters, b = simple spatial fitting failed, p = poor simple spatial fit, x = extracted events parameters, t = temporal anaylsis parameters, i = psf spatial fitting parameters, f = spectral fitting parameters, c = source is confused, u = user-defined source, v = detected source coincident with user-defined source, r = source is in region-of-interest