[Sun Oct  2 16:31:25 2011] Detection parameters:
  Position = (783.6, 394.6) = 20 34 26.71 41 4 1.8
  Extent = 1.6" x 0.9", rotation angle = 103 degrees
  Source counts = 11.6 +/- 3.7
  Background counts = 2.4
  Rate = 0.0004 +/- 0.0001

[Sun Oct  2 16:31:29 2011] Off-axis axis estimate = 6.78'
[Sun Oct  2 16:32:36 2011] Using EEF radius (= 2.05 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 16:32:36 2011] Initial guess for spatial extent in simple fitting = 2.05"
[Sun Oct  2 16:32:36 2011] source mask rpix=4.2, npix_max = 87, mask sum = 81, frac = 0.928
[Sun Oct  2 16:32:36 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 2.05"
[Sun Oct  2 16:32:37 2011] fullrun_ccd3_acisf10973_pi14-548_cl_pass0_src22.ximg exists
[Sun Oct  2 16:32:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10973_pi14-548_cl_pass0_src22.csv
[Sun Oct  2 16:32:37 2011] fullrun_ccd3_acisf10973_pi14-548_cl_pass0_src22_1.ximg exists
[Sun Oct  2 16:32:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10973_pi14-548_cl_pass0_src22.csv
[Sun Oct  2 16:32:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10973_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10973_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 16:32:37 2011] fullrun_ccd3_acisf10973_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Sun Oct  2 16:32:37 2011] fullrun_ccd3_acisf10973_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Oct  2 16:32:37 2011] Fit fullrun_ccd3_acisf10973_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Sun Oct  2 16:32:49 2011] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 24.311765 pixels away
[Sun Oct  2 16:32:49 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 16:32:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 16:32:49 2011] Assessing source extent using major
[Sun Oct  2 16:32:49 2011] Source does appear to be extended
[Sun Oct  2 16:32:49 2011] Computing asymmetry using major and minor axis, asym = 1.82
[Sun Oct  2 16:32:49 2011] Source is asymmetric
[Sun Oct  2 16:33:18 2011] Using EEF radius (= 2.05 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 16:33:18 2011] Initial guess for spatial extent in simple fitting = 2.05"
[Sun Oct  2 16:33:18 2011] source mask rpix=4.2, npix_max = 87, mask sum = 81, frac = 0.928
[Sun Oct  2 16:33:18 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 2.05"
[Sun Oct  2 16:33:19 2011] fullrun_ccd3_acisf10973_pi14-548_cl_pass1_src21.ximg exists
[Sun Oct  2 16:33:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10973_pi14-548_cl_pass1_src21.csv
[Sun Oct  2 16:33:19 2011] fullrun_ccd3_acisf10973_pi14-548_cl_pass1_src21_1.ximg exists
[Sun Oct  2 16:33:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10973_pi14-548_cl_pass1_src21.csv
[Sun Oct  2 16:33:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10973_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10973_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 16:33:19 2011] fullrun_ccd3_acisf10973_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Sun Oct  2 16:33:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10973_pi14-548_cl_pass1_tfrozen_src21.csv
[Sun Oct  2 16:33:19 2011] fullrun_ccd3_acisf10973_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Oct  2 16:33:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10973_pi14-548_cl_pass1_tfrozen_src21.csv
[Sun Oct  2 16:33:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10973_pi14-548_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10973_pi14-548_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 16:33:31 2011] Spatial fit model total counts = 13.664100, observed total counts = 15.000000
[Sun Oct  2 16:33:31 2011] Offset between fit and detection position for source 26 = 0.503313 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.503313 pixels
  Position = (783.9, 395.0) = 20 34 26.72 41 4 1.8
  Extent = 1.7 (1.3-2.2)", rotation angle = 0
  Source counts = 14.1 +/- 3.7
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Sun Oct  2 16:33:31 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 16:33:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 16:33:31 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 16:33:31 2011] Source does appear to be extended
[Sun Oct  2 16:33:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 16:35:37 2011] Not overwriting source region fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26_src.reg
[Sun Oct  2 16:35:37 2011] Extracting stamp from image fullrun_ccd3_acisf10973_pi14-548_cl_sm2.00.img.gz, (704, 316) - (863, 474)
[Sun Oct  2 16:35:37 2011] Writing fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26.gif
[Sun Oct  2 16:36:59 2011] ../../acisf10973/products/events/fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26_src.evt and ../../acisf10973/products/events/fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Sun Oct  2 16:36:59 2011] Size of ../../acisf10973/products/events/fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26_src.evt.gz[events] = 16 counts
[Sun Oct  2 16:36:59 2011] Mean chipx,y = (681.19, 241.12)
[Sun Oct  2 16:36:59 2011] Mean tdetx,y = (4890.88, 3742.19)
[Sun Oct  2 16:36:59 2011] chipx,y range = (661.00-699.00, 220.00-258.00)
[Sun Oct  2 16:36:59 2011] Size of ../../acisf10973/products/events/fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 68 counts
[Sun Oct  2 16:36:59 2011] ../../acisf10973/products/images/fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26_src.img and ../../acisf10973/products/images/fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Sun Oct  2 16:36:59 2011] ../../acisf10973/products/spectra/fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26_src.pi and ../../acisf10973/products/spectra/fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Sun Oct  2 16:36:59 2011] Not generating rmf since there are only 14 counts
[Sun Oct  2 16:37:02 2011] ../../acisf10973/products/lightcurves/fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26_src.lc and ../../acisf10973/products/lightcurves/fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Sun Oct  2 16:37:56 2011] 178.125
[Sun Oct  2 16:38:13 2011] Updating aperture counts using extracted products
[Sun Oct  2 16:38:13 2011] Error reading totcts from fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26_src.pi.gz
[Sun Oct  2 16:38:13 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 16:38:13 2011] Using photon index=1.80, rate=0.000513, arf fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26.arf
[Sun Oct  2 16:38:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 16:38:13 2011] Updating source flux to 8.4e-15
[Sun Oct  2 16:38:20 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct  2 16:38:21 2011] acisf10973/analysis//spectral/fullrun_ccd3_acisf10973_pi14-548_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete