[Tue Oct 18 15:25:15 2011] Detection parameters:
  Position = (654.9, 279.6) = 20 33 54.58 40 59 26.3
  Extent = 2.1" x 1.0", rotation angle = 59 degrees
  Source counts = 12.0 +/- 4.0
  Background counts = 4.0
  Rate = 0.0004 +/- 0.0001

[Tue Oct 18 15:25:16 2011] Off-axis axis estimate = 6.39'
[Tue Oct 18 15:26:32 2011] Using EEF radius (= 1.83 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 15:26:32 2011] Initial guess for spatial extent in simple fitting = 1.83"
[Tue Oct 18 15:26:32 2011] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.007
[Tue Oct 18 15:26:32 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 1.83"
[Tue Oct 18 15:26:33 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src28.ximg exists
[Tue Oct 18 15:26:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src28.csv
[Tue Oct 18 15:26:33 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src28_1.ximg exists
[Tue Oct 18 15:26:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src28.csv
[Tue Oct 18 15:26:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 15:26:34 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Tue Oct 18 15:26:34 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Oct 18 15:26:34 2011] Fit fullrun_ccd3_acisf10972_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Tue Oct 18 15:26:49 2011] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 20.209646 pixels away
[Tue Oct 18 15:26:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 15:26:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 15:26:49 2011] Assessing source extent using major
[Tue Oct 18 15:26:49 2011] Source does appear to be extended
[Tue Oct 18 15:26:49 2011] Computing asymmetry using major and minor axis, asym = 2.06
[Tue Oct 18 15:26:49 2011] Source is asymmetric
[Tue Oct 18 15:27:18 2011] Using EEF radius (= 1.83 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 15:27:18 2011] Initial guess for spatial extent in simple fitting = 1.83"
[Tue Oct 18 15:27:18 2011] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.007
[Tue Oct 18 15:27:18 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 1.83"
[Tue Oct 18 15:27:20 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src27.ximg exists
[Tue Oct 18 15:27:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src27.csv
[Tue Oct 18 15:27:20 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src27_1.ximg exists
[Tue Oct 18 15:27:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src27.csv
[Tue Oct 18 15:27:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 15:27:21 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Tue Oct 18 15:27:21 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Oct 18 15:27:21 2011] Fit fullrun_ccd3_acisf10972_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Tue Oct 18 15:27:34 2011] Spatial fit model total counts = 16.404900, observed total counts = 19.000000
[Tue Oct 18 15:27:34 2011] Offset between fit and detection position for source 43 = 2.802429 pixels
[Tue Oct 18 15:27:34 2011] 16.186790 total counts/ 3.664890 bgd. counts: snr = 6.540934
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.802429 pixels
  Position = (655.9, 282.2) = 20 33 54.56 40 59 27.3
  Extent = 1.5" x 1.5", rotation angle = 293
  Source counts = 12.5 +/- 4.0
  Background counts = 3.7
  Rate = 0.0005 +/- 0.0001
[Tue Oct 18 15:27:34 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 15:27:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 15:27:34 2011] Assessing source extent using major
[Tue Oct 18 15:27:34 2011] Source does appear to be extended
[Tue Oct 18 15:27:34 2011] Computing asymmetry using major and minor axis, asym = 1.01
[Tue Oct 18 15:31:12 2011] Not overwriting source region fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43_src.reg
[Tue Oct 18 15:31:12 2011] Extracting stamp from image fullrun_ccd3_acisf10972_pi14-548_cl_sm2.00.img.gz, (587, 214) - (725, 351)
[Tue Oct 18 15:31:12 2011] Writing fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43.gif
[Tue Oct 18 15:32:31 2011] ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43_src.evt and ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43_bgd.evt exist, delete to re-create
[Tue Oct 18 15:32:31 2011] Size of ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43_src.evt.gz[events] = 17 counts
[Tue Oct 18 15:32:31 2011] Mean chipx,y = (861.24, 240.59)
[Tue Oct 18 15:32:31 2011] Mean tdetx,y = (4891.41, 3922.24)
[Tue Oct 18 15:32:31 2011] chipx,y range = (843.00-879.00, 225.00-263.00)
[Tue Oct 18 15:32:31 2011] Size of ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43_bgd.evt.gz[events] = 60 counts
[Tue Oct 18 15:32:31 2011] ../../acisf10972/products/images/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43_src.img and ../../acisf10972/products/images/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43_bgd.img exist, delete to re-create
[Tue Oct 18 15:32:31 2011] ../../acisf10972/products/spectra/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43_src.pi and ../../acisf10972/products/spectra/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43_bgd.pi exist, delete to re-create
[Tue Oct 18 15:32:31 2011] Not generating rmf since there are only 12 counts
[Tue Oct 18 15:32:33 2011] ../../acisf10972/products/lightcurves/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43_src.lc and ../../acisf10972/products/lightcurves/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43_bgd.lc exist, delete to re-create
[Tue Oct 18 15:33:45 2011] 176.34
[Tue Oct 18 15:34:22 2011] Updating aperture counts using extracted products
[Tue Oct 18 15:34:22 2011] Error reading totcts from fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43_src.pi.gz
[Tue Oct 18 15:34:22 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 15:34:22 2011] Using photon index=1.80, rate=0.000452, arf fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src43.arf
[Tue Oct 18 15:34:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 15:34:22 2011] Updating source flux to 7.5e-15
[Tue Oct 18 15:34:33 2011] Source 43 has fewer than 100.000000 counts, skipping spectral fitting