[Tue Oct 18 15:25:13 2011] Detection parameters:
  Position = (271.4, 762.8) = 20 34 11.24 41 3 24.2
  Extent = 0.6" x 0.5", rotation angle = 168 degrees
  Source counts = 15.0 +/- 4.0
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0001

[Tue Oct 18 15:25:16 2011] Off-axis axis estimate = 1.80'
[Tue Oct 18 15:26:32 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 15:26:32 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Tue Oct 18 15:26:32 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.257
[Tue Oct 18 15:26:32 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.41"
[Tue Oct 18 15:26:33 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src21.ximg exists
[Tue Oct 18 15:26:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src21.csv
[Tue Oct 18 15:26:33 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src21_1.ximg exists
[Tue Oct 18 15:26:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src21.csv
[Tue Oct 18 15:26:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 15:26:34 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Tue Oct 18 15:26:34 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Oct 18 15:26:34 2011] Fit fullrun_ccd3_acisf10972_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Oct 18 15:26:49 2011] Spatial fit model total counts = 16.006500, observed total counts = 17.000000
[Tue Oct 18 15:26:49 2011] Offset between fit and detection position for source 18 = 0.657048 pixels
[Tue Oct 18 15:26:49 2011] 15.756865 total counts/ 0.032765 bgd. counts: snr = 86.868310
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.657048 pixels
  Position = (271.9, 763.3) = 20 34 11.24 41 3 24.2
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 15.7 +/- 4.0
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Tue Oct 18 15:26:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 15:26:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 15:26:49 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 15:26:49 2011] Source does appear to be extended
[Tue Oct 18 15:26:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 15:27:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 15:27:18 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Tue Oct 18 15:27:18 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.072
[Tue Oct 18 15:27:18 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.70"
[Tue Oct 18 15:27:19 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src20.ximg exists
[Tue Oct 18 15:27:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src20.csv
[Tue Oct 18 15:27:19 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src20_1.ximg exists
[Tue Oct 18 15:27:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src20.csv
[Tue Oct 18 15:27:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 15:27:20 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Tue Oct 18 15:27:20 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Oct 18 15:27:20 2011] Fit fullrun_ccd3_acisf10972_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Tue Oct 18 15:27:34 2011] Spatial fit model total counts = 16.788600, observed total counts = 17.000000
[Tue Oct 18 15:27:34 2011] Offset between fit and detection position for source 18 = 0.132009 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.132009 pixels
  Position = (272.0, 763.3) = 20 34 11.23 41 3 24.2
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 16.4 +/- 4.1
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Tue Oct 18 15:27:34 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 15:27:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 15:27:34 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 15:27:34 2011] Source does appear to be extended
[Tue Oct 18 15:27:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 15:31:12 2011] Not overwriting source region fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18_src.reg
[Tue Oct 18 15:31:12 2011] Extracting stamp from image fullrun_ccd3_acisf10972_pi14-548_cl_sm2.00.img.gz, (240, 731) - (304, 796)
[Tue Oct 18 15:31:12 2011] Writing fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18.gif
[Tue Oct 18 15:32:12 2011] ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18_src.evt and ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Tue Oct 18 15:32:12 2011] Size of ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18_src.evt.gz[events] = 16 counts
[Tue Oct 18 15:32:12 2011] Mean chipx,y = (801.31, 861.75)
[Tue Oct 18 15:32:12 2011] Mean tdetx,y = (4270.25, 3862.31)
[Tue Oct 18 15:32:12 2011] chipx,y range = (784.00-819.00, 845.00-878.00)
[Tue Oct 18 15:32:12 2011] Size of ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 22 counts
[Tue Oct 18 15:32:12 2011] ../../acisf10972/products/images/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18_src.img and ../../acisf10972/products/images/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Tue Oct 18 15:32:12 2011] ../../acisf10972/products/spectra/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18_src.pi and ../../acisf10972/products/spectra/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Tue Oct 18 15:32:12 2011] Not generating rmf since there are only 16 counts
[Tue Oct 18 15:32:15 2011] ../../acisf10972/products/lightcurves/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18_src.lc and ../../acisf10972/products/lightcurves/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Tue Oct 18 15:33:45 2011] 199.09
[Tue Oct 18 15:34:22 2011] Updating aperture counts using extracted products
[Tue Oct 18 15:34:22 2011] Error reading totcts from fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18_src.pi.gz
[Tue Oct 18 15:34:22 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 15:34:22 2011] Using photon index=1.80, rate=0.000594, arf fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src18.arf
[Tue Oct 18 15:34:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 15:34:22 2011] Updating source flux to 8.9e-15
[Tue Oct 18 15:34:33 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting