[Tue Oct 18 15:25:13 2011] Detection parameters:
  Position = (634.2, 699.5) = 20 33 55.46 41 2 52.9
  Extent = 0.6" x 0.5", rotation angle = 90 degrees
  Source counts = 13.8 +/- 3.9
  Background counts = 1.2
  Rate = 0.0005 +/- 0.0001

[Tue Oct 18 15:25:16 2011] Off-axis axis estimate = 4.81'
[Tue Oct 18 15:26:32 2011] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 15:26:32 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Tue Oct 18 15:26:32 2011] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.992
[Tue Oct 18 15:26:32 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 1.11"
[Tue Oct 18 15:26:33 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src24.ximg exists
[Tue Oct 18 15:26:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src24.csv
[Tue Oct 18 15:26:33 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src24_1.ximg exists
[Tue Oct 18 15:26:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src24.csv
[Tue Oct 18 15:26:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 15:26:34 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Tue Oct 18 15:26:34 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Tue Oct 18 15:26:34 2011] Fit fullrun_ccd3_acisf10972_pi14-548_cl_pass0_tfrozen_src24 appears to have run properly
[Tue Oct 18 15:26:49 2011] Spatial fit model total counts = 17.730800, observed total counts = 18.000000
[Tue Oct 18 15:26:49 2011] Offset between fit and detection position for source 17 = 0.921438 pixels
[Tue Oct 18 15:26:49 2011] 18.155420 total counts/ 6.719120 bgd. counts: snr = 4.411937
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.921438 pixels
  Position = (634.3, 700.4) = 20 33 55.48 41 2 53.1
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 11.4 +/- 4.3
  Background counts = 6.7
  Rate = 0.0004 +/- 0.0002
[Tue Oct 18 15:26:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 15:26:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 15:26:49 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 15:26:49 2011] Source does appear to be extended
[Tue Oct 18 15:26:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 15:27:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 15:27:18 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Tue Oct 18 15:27:18 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.889
[Tue Oct 18 15:27:18 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 0.54"
[Tue Oct 18 15:27:20 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src23.ximg exists
[Tue Oct 18 15:27:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src23.csv
[Tue Oct 18 15:27:20 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src23_1.ximg exists
[Tue Oct 18 15:27:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src23.csv
[Tue Oct 18 15:27:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 15:27:20 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Tue Oct 18 15:27:21 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Oct 18 15:27:21 2011] Fit fullrun_ccd3_acisf10972_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Tue Oct 18 15:27:34 2011] Spatial fit model total counts = 17.027600, observed total counts = 17.000000
[Tue Oct 18 15:27:34 2011] Offset between fit and detection position for source 17 = 0.255222 pixels
[Tue Oct 18 15:27:34 2011] 16.759440 total counts/ 3.260640 bgd. counts: snr = 7.475560
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.255222 pixels
  Position = (634.6, 700.3) = 20 33 55.47 41 2 53.0
  Extent = 0.7 (0.4-0.9)", rotation angle = 0
  Source counts = 13.5 +/- 4.1
  Background counts = 3.3
  Rate = 0.0005 +/- 0.0001
[Tue Oct 18 15:27:34 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 15:27:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 15:27:34 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 15:27:34 2011] Source does appear to be extended
[Tue Oct 18 15:27:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 15:31:12 2011] Not overwriting source region fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17_src.reg
[Tue Oct 18 15:31:12 2011] Extracting stamp from image fullrun_ccd3_acisf10972_pi14-548_cl_sm2.00.img.gz, (605, 670) - (665, 730)
[Tue Oct 18 15:31:12 2011] Writing fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17.gif
[Tue Oct 18 15:32:20 2011] ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17_src.evt and ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Tue Oct 18 15:32:20 2011] Size of ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17_src.evt.gz[events] = 15 counts
[Tue Oct 18 15:32:20 2011] Mean chipx,y = (586.47, 562.93)
[Tue Oct 18 15:32:20 2011] Mean tdetx,y = (4569.07, 3647.47)
[Tue Oct 18 15:32:20 2011] chipx,y range = (567.00-602.00, 545.00-578.00)
[Tue Oct 18 15:32:20 2011] Size of ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 19 counts
[Tue Oct 18 15:32:20 2011] ../../acisf10972/products/images/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17_src.img and ../../acisf10972/products/images/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Tue Oct 18 15:32:20 2011] ../../acisf10972/products/spectra/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17_src.pi and ../../acisf10972/products/spectra/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Tue Oct 18 15:32:20 2011] Not generating rmf since there are only 13 counts
[Tue Oct 18 15:32:23 2011] ../../acisf10972/products/lightcurves/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17_src.lc and ../../acisf10972/products/lightcurves/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Tue Oct 18 15:33:45 2011] 184.608
[Tue Oct 18 15:34:22 2011] Updating aperture counts using extracted products
[Tue Oct 18 15:34:22 2011] Error reading totcts from fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17_src.pi.gz
[Tue Oct 18 15:34:22 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 15:34:22 2011] Using photon index=1.80, rate=0.000488, arf fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src17.arf
[Tue Oct 18 15:34:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 15:34:22 2011] Updating source flux to 7.9e-15
[Tue Oct 18 15:34:33 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting