[Tue Oct 18 15:25:13 2011] Detection parameters:
  Position = (436.0, 288.7) = 20 34 4.10 40 59 30.9
  Extent = 0.8" x 0.5", rotation angle = 78 degrees
  Source counts = 225.7 +/- 15.2
  Background counts = 4.3
  Rate = 0.008 +/- 0.0005

[Tue Oct 18 15:25:16 2011] Off-axis axis estimate = 5.07'
[Tue Oct 18 15:26:32 2011] Using EEF radius (= 1.21 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 15:26:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 15:26:32 2011] Initial guess for spatial extent in simple fitting = 1.21"
[Tue Oct 18 15:26:32 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.027
[Tue Oct 18 15:26:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.21"
[Tue Oct 18 15:26:32 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct 18 15:26:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 15:26:32 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct 18 15:26:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 15:26:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10972_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 15:26:33 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct 18 15:26:33 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct 18 15:26:33 2011] Fit fullrun_ccd3_acisf10972_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct 18 15:26:49 2011] Spatial fit model total counts = 234.521000, observed total counts = 233.000000
[Tue Oct 18 15:26:49 2011] Offset between fit and detection position for source 1 = 0.832439 pixels
[Tue Oct 18 15:26:49 2011] 234.084800 total counts/ 21.776800 bgd. counts: snr = 45.495593
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.832439 pixels
  Position = (436.5, 289.3) = 20 34 4.10 40 59 31.0
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 212.3 +/- 15.3
  Background counts = 21.8
  Rate = 0.008 +/- 0.0006
[Tue Oct 18 15:26:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 15:26:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 15:26:49 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 15:26:49 2011] Source does appear to be extended
[Tue Oct 18 15:26:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 15:27:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 15:27:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 15:27:18 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Tue Oct 18 15:27:18 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.137
[Tue Oct 18 15:27:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.91"
[Tue Oct 18 15:27:19 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct 18 15:27:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 15:27:19 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct 18 15:27:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 15:27:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10972_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 15:27:20 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct 18 15:27:20 2011] fullrun_ccd3_acisf10972_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct 18 15:27:20 2011] Fit fullrun_ccd3_acisf10972_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct 18 15:27:34 2011] Spatial fit model total counts = 227.908000, observed total counts = 230.000000
[Tue Oct 18 15:27:34 2011] Offset between fit and detection position for source 1 = 0.025704 pixels
[Tue Oct 18 15:27:34 2011] 229.057100 total counts/ 34.414100 bgd. counts: snr = 33.179557
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.025704 pixels
  Position = (436.5, 289.4) = 20 34 4.10 40 59 31.0
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 194.6 +/- 15.1
  Background counts = 34.4
  Rate = 0.007 +/- 0.0005
[Tue Oct 18 15:27:34 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 15:27:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 15:27:34 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 15:27:34 2011] Source does appear to be extended
[Tue Oct 18 15:27:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 15:31:12 2011] Not overwriting source region fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_src.reg
[Tue Oct 18 15:31:12 2011] Extracting stamp from image fullrun_ccd3_acisf10972_pi14-548_cl_sm2.00.img.gz, (399, 252) - (474, 327)
[Tue Oct 18 15:31:12 2011] Writing fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1.gif
[Tue Oct 18 15:31:16 2011] ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_src.evt and ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Oct 18 15:31:16 2011] Size of ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_src.evt.gz[events] = 224 counts
[Tue Oct 18 15:31:16 2011] Mean chipx,y = (1008.60, 405.49)
[Tue Oct 18 15:31:16 2011] Mean tdetx,y = (4726.51, 4069.60)
[Tue Oct 18 15:31:16 2011] chipx,y range = (991.00-1023.00, 385.00-424.00)
[Tue Oct 18 15:31:16 2011] Size of ../../acisf10972/products/events/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 15 counts
[Tue Oct 18 15:31:16 2011] ../../acisf10972/products/images/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_src.img and ../../acisf10972/products/images/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Oct 18 15:31:16 2011] ../../acisf10972/products/spectra/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_src.pi and ../../acisf10972/products/spectra/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Oct 18 15:31:19 2011] ../../acisf10972/products/lightcurves/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_src.lc and ../../acisf10972/products/lightcurves/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Oct 18 15:33:45 2011] Keeping rmf generated by specextract
[Tue Oct 18 15:33:45 2011] 185.502
[Tue Oct 18 15:34:21 2011] Updating aperture counts using extracted products
[Tue Oct 18 15:34:21 2011] Error reading totcts from fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Oct 18 15:34:22 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 15:34:22 2011] Using photon index=1.80, rate=0.00703, arf fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1.arf
[Tue Oct 18 15:34:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 15:34:22 2011] Updating source flux to 1.1e-13
[Tue Oct 18 15:34:40 2011] Reading fit data from acisf10972/analysis//spectral/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_pl.csv
[Tue Oct 18 15:34:40 2011] Spectral fit parameter nH value = 2.8309e+21
[Tue Oct 18 15:34:40 2011] Spectral fit parameter PhoIndex value = 4.50626
[Tue Oct 18 15:34:40 2011] Failed to get F(0.3-8.0) from acisf10972/analysis//spectral/fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Oct 18 15:34:40 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 15:34:40 2011] Using Nh = 2.8e+21, photon index=4.51, rate=0.00703, arf fullrun_ccd3_acisf10972_pi14-548_pass1_cl_src1.arf
[Tue Oct 18 15:34:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 15:34:40 2011] Updating source flux to 6.8e-14