[Tue Oct 18 15:25:08 2011] Detection parameters:
  Position = (1007.4, 709.2) = 20 34 42.47 41 3 3.1
  Extent = 0.8" x 0.5", rotation angle = 23 degrees
  Source counts = 14.8 +/- 4.0
  Background counts = 1.2
  Rate = 0.0005 +/- 0.0001

[Tue Oct 18 15:25:09 2011] Off-axis axis estimate = 4.11'
[Tue Oct 18 15:26:28 2011] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 15:26:28 2011] Initial guess for spatial extent in simple fitting = 0.86"
[Tue Oct 18 15:26:28 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.982
[Tue Oct 18 15:26:28 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.86"
[Tue Oct 18 15:26:28 2011] fullrun_ccd0_acisf10972_pi14-548_cl_pass0_src3.ximg exists
[Tue Oct 18 15:26:28 2011] fullrun_ccd0_acisf10972_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Oct 18 15:26:28 2011] Fit fullrun_ccd0_acisf10972_pi14-548_cl_pass0_src3 appears to have run properly
[Tue Oct 18 15:26:29 2011] fullrun_ccd0_acisf10972_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Oct 18 15:26:29 2011] fullrun_ccd0_acisf10972_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Oct 18 15:26:29 2011] Fit fullrun_ccd0_acisf10972_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Oct 18 15:26:41 2011] Spatial fit model total counts = 16.107700, observed total counts = 17.000000
[Tue Oct 18 15:26:41 2011] Offset between fit and detection position for source 5 = 0.914277 pixels
[Tue Oct 18 15:26:41 2011] 16.105100 total counts/ 0.000000 bgd. counts: snr = 51450238792.022194
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.914277 pixels
  Position = (1008.1, 709.8) = 20 34 42.46 41 3 3.2
  Extent = 1.0 (0.7-1.7)" x 0.6 (0.4-0.8)", rotation angle = 154 (133-193) degrees
  Source counts = 16.1 +/- 4.0
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Tue Oct 18 15:26:41 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 15:26:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 15:26:41 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 15:26:41 2011] Source does appear to be extended
[Tue Oct 18 15:26:41 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.85
[Tue Oct 18 15:27:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 15:27:15 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Tue Oct 18 15:27:15 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.865
[Tue Oct 18 15:27:15 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.81"
[Tue Oct 18 15:27:15 2011] fullrun_ccd0_acisf10972_pi14-548_cl_pass1_src3.ximg exists
[Tue Oct 18 15:27:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10972_pi14-548_cl_pass1_src3.csv
[Tue Oct 18 15:27:15 2011] fullrun_ccd0_acisf10972_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Oct 18 15:27:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10972_pi14-548_cl_pass1_src3.csv
[Tue Oct 18 15:27:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10972_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10972_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 15:27:15 2011] fullrun_ccd0_acisf10972_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Oct 18 15:27:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10972_pi14-548_cl_pass1_tfrozen_src3.csv
[Tue Oct 18 15:27:15 2011] fullrun_ccd0_acisf10972_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Oct 18 15:27:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10972_pi14-548_cl_pass1_tfrozen_src3.csv
[Tue Oct 18 15:27:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10972_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10972_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 15:27:26 2011] Spatial fit model total counts = 15.240500, observed total counts = 17.000000
[Tue Oct 18 15:27:26 2011] Offset between fit and detection position for source 5 = 0.464600 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.464600 pixels
  Position = (1008.6, 709.9) = 20 34 42.44 41 3 3.2
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 14.5 +/- 3.8
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Tue Oct 18 15:27:26 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 15:27:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 15:27:26 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 15:27:26 2011] Source does appear to be extended
[Tue Oct 18 15:27:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 15:27:58 2011] Not overwriting source region fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5_src.reg
[Tue Oct 18 15:27:58 2011] Extracting stamp from image fullrun_ccd0_acisf10972_pi14-548_cl_sm2.00.img.gz, (976, 678) - (1041, 742)
[Tue Oct 18 15:27:58 2011] Writing fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5.gif
[Tue Oct 18 15:28:04 2011] ../../acisf10972/products/events/fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5_src.evt and ../../acisf10972/products/events/fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Tue Oct 18 15:28:04 2011] Size of ../../acisf10972/products/events/fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5_src.evt.gz[events] = 16 counts
[Tue Oct 18 15:28:04 2011] Mean chipx,y = (726.50, 740.31)
[Tue Oct 18 15:28:04 2011] Mean tdetx,y = (3801.31, 4405.50)
[Tue Oct 18 15:28:04 2011] chipx,y range = (710.00-744.00, 720.00-756.00)
[Tue Oct 18 15:28:04 2011] Size of ../../acisf10972/products/events/fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 24 counts
[Tue Oct 18 15:28:04 2011] ../../acisf10972/products/images/fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5_src.img and ../../acisf10972/products/images/fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Tue Oct 18 15:28:04 2011] ../../acisf10972/products/spectra/fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5_src.pi and ../../acisf10972/products/spectra/fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Tue Oct 18 15:28:04 2011] Not generating rmf since there are only 14 counts
[Tue Oct 18 15:28:07 2011] ../../acisf10972/products/lightcurves/fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5_src.lc and ../../acisf10972/products/lightcurves/fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Tue Oct 18 15:28:07 2011] 193.228
[Tue Oct 18 15:34:20 2011] Updating aperture counts using extracted products
[Tue Oct 18 15:34:20 2011] Error reading totcts from fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5_src.pi.gz
[Tue Oct 18 15:34:20 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 15:34:20 2011] Using photon index=1.80, rate=0.000523, arf fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5.arf
[Tue Oct 18 15:34:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 15:34:20 2011] Updating source flux to 8e-15
[Tue Oct 18 15:34:27 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 15:34:28 2011] acisf10972/analysis//spectral/fullrun_ccd0_acisf10972_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete