[Fri Sep 23 09:58:20 2011] Detection parameters:
  Position = (436.5, 446.8) = 20 33 26.07 40 57 7.2
  Extent = 0.7" x 0.5", rotation angle = 68 degrees
  Source counts = 10.7 +/- 3.5
  Background counts = 1.3
  Rate = 0.0004 +/- 0.0001

[Fri Sep 23 09:58:26 2011] Off-axis axis estimate = 4.18'
[Fri Sep 23 10:00:11 2011] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:00:11 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Fri Sep 23 10:00:11 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.945
[Fri Sep 23 10:00:11 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 0.89"
[Fri Sep 23 10:00:17 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass0_src33.ximg exists
[Fri Sep 23 10:00:17 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass0_src33_1.ximg exists
[Fri Sep 23 10:00:17 2011] Fit fullrun_ccd3_acisf10971_pi14-548_cl_pass0_src33 appears to have run properly
[Fri Sep 23 10:00:22 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Fri Sep 23 10:00:22 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Sep 23 10:00:22 2011] Fit fullrun_ccd3_acisf10971_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Sep 23 10:00:54 2011] Spatial fit model total counts = 12.252100, observed total counts = 13.000000
[Fri Sep 23 10:00:54 2011] Offset between fit and detection position for source 36 = 0.692282 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.692282 pixels
  Position = (437.0, 447.3) = 20 33 26.07 40 57 7.2
  Extent = 0.7 (0.4-1.0)", rotation angle = 0
  Source counts = 12.1 +/- 3.5
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri Sep 23 10:00:54 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:00:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:00:54 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:00:54 2011] Source does appear to be extended
[Fri Sep 23 10:00:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:01:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:01:43 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Fri Sep 23 10:01:43 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.053
[Fri Sep 23 10:01:43 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 0.71"
[Fri Sep 23 10:01:44 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass1_src33.ximg exists
[Fri Sep 23 10:01:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10971_pi14-548_cl_pass1_src33.csv
[Fri Sep 23 10:01:44 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass1_src33_1.ximg exists
[Fri Sep 23 10:01:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10971_pi14-548_cl_pass1_src33.csv
[Fri Sep 23 10:01:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10971_pi14-548_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10971_pi14-548_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:01:45 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass1_tfrozen_src33.ximg exists
[Fri Sep 23 10:01:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10971_pi14-548_cl_pass1_tfrozen_src33.csv
[Fri Sep 23 10:01:45 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Sep 23 10:01:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10971_pi14-548_cl_pass1_tfrozen_src33.csv
[Fri Sep 23 10:01:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10971_pi14-548_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10971_pi14-548_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:02:16 2011] Spatial fit model total counts = 12.830800, observed total counts = 14.000000
[Fri Sep 23 10:02:16 2011] Offset between fit and detection position for source 36 = 0.081094 pixels
[Fri Sep 23 10:02:16 2011] 13.290540 total counts/ 1.083340 bgd. counts: snr = 11.728262
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.081094 pixels
  Position = (437.0, 447.2) = 20 33 26.08 40 57 7.2
  Extent = 0.8 (0.4-1.1)", rotation angle = 0
  Source counts = 12.2 +/- 3.6
  Background counts = 1.1
  Rate = 0.0004 +/- 0.0001
[Fri Sep 23 10:02:16 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:02:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:02:16 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:02:16 2011] Source does appear to be extended
[Fri Sep 23 10:02:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:10:21 2011] Not overwriting source region fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36_src.reg
[Fri Sep 23 10:10:21 2011] Extracting stamp from image fullrun_ccd3_acisf10971_pi14-548_cl_sm2.00.img.gz, (401, 411) - (473, 483)
[Fri Sep 23 10:10:21 2011] Writing fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36.gif
[Fri Sep 23 10:11:57 2011] ../../acisf10971/products/events/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36_src.evt and ../../acisf10971/products/events/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Fri Sep 23 10:11:57 2011] Size of ../../acisf10971/products/events/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36_src.evt.gz[events] = 12 counts
[Fri Sep 23 10:11:57 2011] Mean chipx,y = (908.58, 516.50)
[Fri Sep 23 10:11:57 2011] Mean tdetx,y = (4615.50, 3969.58)
[Fri Sep 23 10:11:57 2011] chipx,y range = (893.00-924.00, 496.00-531.00)
[Fri Sep 23 10:11:58 2011] Size of ../../acisf10971/products/events/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 29 counts
[Fri Sep 23 10:11:58 2011] ../../acisf10971/products/images/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36_src.img and ../../acisf10971/products/images/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Fri Sep 23 10:11:58 2011] ../../acisf10971/products/spectra/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36_src.pi and ../../acisf10971/products/spectra/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Fri Sep 23 10:11:58 2011] Not generating rmf since there are only 12 counts
[Fri Sep 23 10:12:01 2011] ../../acisf10971/products/lightcurves/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36_src.lc and ../../acisf10971/products/lightcurves/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Fri Sep 23 10:12:46 2011] 193.004
[Fri Sep 23 10:13:46 2011] Updating aperture counts using extracted products
[Fri Sep 23 10:13:46 2011] Error reading totcts from fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36_src.pi.gz
[Fri Sep 23 10:13:47 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:13:47 2011] Using photon index=1.80, rate=0.000404, arf fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src36.arf
[Fri Sep 23 10:13:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 10:13:47 2011] Updating source flux to 6.3e-15
[Fri Sep 23 10:14:16 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting