[Fri Sep 23 09:58:17 2011] Detection parameters:
  Position = (754.8, 814.2) = 20 33 12.23 41 0 7.8
  Extent = 0.6" x 0.6", rotation angle = 20 degrees
  Source counts = 16.0 +/- 4.2
  Background counts = 2.0
  Rate = 0.0005 +/- 0.0001

[Fri Sep 23 09:58:26 2011] Off-axis axis estimate = 5.80'
[Fri Sep 23 10:00:11 2011] Using EEF radius (= 1.53 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:00:11 2011] Initial guess for spatial extent in simple fitting = 1.53"
[Fri Sep 23 10:00:11 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.940
[Fri Sep 23 10:00:11 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 1.53"
[Fri Sep 23 10:00:12 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass0_src23.ximg exists
[Fri Sep 23 10:00:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10971_pi14-548_cl_pass0_src23.csv
[Fri Sep 23 10:00:12 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass0_src23_1.ximg exists
[Fri Sep 23 10:00:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10971_pi14-548_cl_pass0_src23.csv
[Fri Sep 23 10:00:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10971_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10971_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:00:21 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Fri Sep 23 10:00:21 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Sep 23 10:00:21 2011] Fit fullrun_ccd3_acisf10971_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Sep 23 10:00:54 2011] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 16.769210 pixels away
[Fri Sep 23 10:00:54 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:00:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:00:54 2011] Assessing source extent using major
[Fri Sep 23 10:00:54 2011] Source does appear to be extended
[Fri Sep 23 10:00:54 2011] Computing asymmetry using major and minor axis, asym = 1.09
[Fri Sep 23 10:01:43 2011] Using EEF radius (= 1.53 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:01:43 2011] Initial guess for spatial extent in simple fitting = 1.53"
[Fri Sep 23 10:01:43 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.940
[Fri Sep 23 10:01:43 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 1.53"
[Fri Sep 23 10:01:44 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass1_src23.ximg exists
[Fri Sep 23 10:01:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10971_pi14-548_cl_pass1_src23.csv
[Fri Sep 23 10:01:44 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass1_src23_1.ximg exists
[Fri Sep 23 10:01:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10971_pi14-548_cl_pass1_src23.csv
[Fri Sep 23 10:01:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10971_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10971_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:01:45 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Fri Sep 23 10:01:45 2011] fullrun_ccd3_acisf10971_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Sep 23 10:01:45 2011] Fit fullrun_ccd3_acisf10971_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Sep 23 10:02:16 2011] Spatial fit model total counts = 27.999900, observed total counts = 28.000000
[Fri Sep 23 10:02:16 2011] Offset between fit and detection position for source 12 = 0.895526 pixels
[Fri Sep 23 10:02:16 2011] 28.291600 total counts/ 13.234300 bgd. counts: snr = 4.139011
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.895526 pixels
  Position = (755.5, 814.8) = 20 33 12.22 41 0 7.8
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 15.1 +/- 5.3
  Background counts = 13.2
  Rate = 0.0005 +/- 0.0002
[Fri Sep 23 10:02:16 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:02:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:02:16 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:02:16 2011] Source does appear to be extended
[Fri Sep 23 10:02:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:10:21 2011] Not overwriting source region fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12_src.reg
[Fri Sep 23 10:10:21 2011] Extracting stamp from image fullrun_ccd3_acisf10971_pi14-548_cl_sm2.00.img.gz, (722, 782) - (788, 848)
[Fri Sep 23 10:10:21 2011] Writing fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12.gif
[Fri Sep 23 10:11:28 2011] ../../acisf10971/products/events/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12_src.evt and ../../acisf10971/products/events/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Fri Sep 23 10:11:28 2011] Size of ../../acisf10971/products/events/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12_src.evt.gz[events] = 18 counts
[Fri Sep 23 10:11:28 2011] Mean chipx,y = (418.28, 544.67)
[Fri Sep 23 10:11:28 2011] Mean tdetx,y = (4587.33, 3479.28)
[Fri Sep 23 10:11:28 2011] chipx,y range = (402.00-439.00, 533.00-563.00)
[Fri Sep 23 10:11:28 2011] Size of ../../acisf10971/products/events/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 30 counts
[Fri Sep 23 10:11:28 2011] ../../acisf10971/products/images/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12_src.img and ../../acisf10971/products/images/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Fri Sep 23 10:11:28 2011] ../../acisf10971/products/spectra/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12_src.pi and ../../acisf10971/products/spectra/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Fri Sep 23 10:11:28 2011] Not generating rmf since there are only 15 counts
[Fri Sep 23 10:11:31 2011] ../../acisf10971/products/lightcurves/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12_src.lc and ../../acisf10971/products/lightcurves/fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Fri Sep 23 10:12:46 2011] 179.416
[Fri Sep 23 10:13:46 2011] Updating aperture counts using extracted products
[Fri Sep 23 10:13:46 2011] Error reading totcts from fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12_src.pi.gz
[Fri Sep 23 10:13:46 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:13:46 2011] Using photon index=1.80, rate=0.000498, arf fullrun_ccd3_acisf10971_pi14-548_pass1_cl_src12.arf
[Fri Sep 23 10:13:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 10:13:46 2011] Updating source flux to 8.3e-15
[Fri Sep 23 10:14:16 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting