[Fri Sep 23 09:58:06 2011] Detection parameters:
  Position = (279.8, 687.0) = 20 34 4.58 41 5 4.5
  Extent = 1.6" x 1.3", rotation angle = 177 degrees
  Source counts = 53.6 +/- 7.8
  Background counts = 7.4
  Rate = 0.002 +/- 0.0003

[Fri Sep 23 09:58:12 2011] Off-axis axis estimate = 6.64'
[Fri Sep 23 10:00:08 2011] Using EEF radius (= 1.97 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:00:08 2011] Initial guess for spatial extent in simple fitting = 1.97"
[Fri Sep 23 10:00:08 2011] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.996
[Fri Sep 23 10:00:08 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.97"
[Fri Sep 23 10:00:09 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src5.ximg exists
[Fri Sep 23 10:00:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src5.csv
[Fri Sep 23 10:00:09 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Sep 23 10:00:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src5.csv
[Fri Sep 23 10:00:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:00:09 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Sep 23 10:00:09 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Sep 23 10:00:09 2011] Fit fullrun_ccd2_acisf10971_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Sep 23 10:00:49 2011] Spatial fit model total counts = 70.502900, observed total counts = 70.000000
[Fri Sep 23 10:00:49 2011] Offset between fit and detection position for source 4 = 0.652881 pixels
[Fri Sep 23 10:00:49 2011] 70.383983 total counts/ 0.043183 bgd. counts: snr = 338.493548
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.652881 pixels
  Position = (280.5, 687.2) = 20 34 4.58 41 5 4.3
  Extent = 2.3 (1.5-2.7)", rotation angle = 0
  Source counts = 70.3 +/- 8.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Sep 23 10:00:49 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:00:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:00:49 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:00:49 2011] Source does appear to be extended
[Fri Sep 23 10:00:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:01:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:01:39 2011] Initial guess for spatial extent in simple fitting = 2.32"
[Fri Sep 23 10:01:39 2011] source mask rpix=4.7, npix_max = 108, mask sum = 110, frac = 1.012
[Fri Sep 23 10:01:39 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 2.32"
[Fri Sep 23 10:01:40 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass1_src5.ximg exists
[Fri Sep 23 10:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10971_pi14-548_cl_pass1_src5.csv
[Fri Sep 23 10:01:40 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Sep 23 10:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10971_pi14-548_cl_pass1_src5.csv
[Fri Sep 23 10:01:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10971_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10971_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:01:41 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Sep 23 10:01:41 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Sep 23 10:01:41 2011] Fit fullrun_ccd2_acisf10971_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Sep 23 10:02:11 2011] Spatial fit model total counts = 71.204200, observed total counts = 72.000000
[Fri Sep 23 10:02:11 2011] Offset between fit and detection position for source 4 = 1.293578 pixels
[Fri Sep 23 10:02:11 2011] 71.769470 total counts/ 3.460970 bgd. counts: snr = 36.717731
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.293578 pixels
  Position = (279.2, 687.6) = 20 34 4.63 41 5 4.5
  Extent = 2.3 (1.7-2.6)", rotation angle = 0
  Source counts = 68.3 +/- 8.5
  Background counts = 3.5
  Rate = 0.002 +/- 0.0003
[Fri Sep 23 10:02:11 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:02:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:02:11 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:02:11 2011] Source does appear to be extended
[Fri Sep 23 10:02:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:07:18 2011] Not overwriting source region fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4_src.reg
[Fri Sep 23 10:07:18 2011] Extracting stamp from image fullrun_ccd2_acisf10971_pi14-548_cl_sm2.00.img.gz, (173, 582) - (385, 794)
[Fri Sep 23 10:07:18 2011] Writing fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4.gif
[Fri Sep 23 10:07:35 2011] ../../acisf10971/products/events/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4_src.evt and ../../acisf10971/products/events/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Sep 23 10:07:35 2011] Size of ../../acisf10971/products/events/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4_src.evt.gz[events] = 80 counts
[Fri Sep 23 10:07:35 2011] Mean chipx,y = (173.61, 240.95)
[Fri Sep 23 10:07:35 2011] Mean tdetx,y = (3301.95, 3912.39)
[Fri Sep 23 10:07:35 2011] chipx,y range = (146.00-202.00, 207.00-269.00)
[Fri Sep 23 10:07:35 2011] Size of ../../acisf10971/products/events/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 152 counts
[Fri Sep 23 10:07:35 2011] ../../acisf10971/products/images/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4_src.img and ../../acisf10971/products/images/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Sep 23 10:07:35 2011] ../../acisf10971/products/spectra/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4_src.pi and ../../acisf10971/products/spectra/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Sep 23 10:07:35 2011] Not generating rmf since there are only 68 counts
[Fri Sep 23 10:07:41 2011] ../../acisf10971/products/lightcurves/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4_src.lc and ../../acisf10971/products/lightcurves/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Sep 23 10:10:19 2011] 172.098
[Fri Sep 23 10:13:44 2011] Updating aperture counts using extracted products
[Fri Sep 23 10:13:44 2011] Error reading totcts from fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Sep 23 10:13:45 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:13:45 2011] Using photon index=1.80, rate=0.00226, arf fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src4.arf
[Fri Sep 23 10:13:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 10:13:45 2011] Updating source flux to 3.8e-14
[Fri Sep 23 10:14:07 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting