[Fri Sep 23 09:58:09 2011] Detection parameters:
  Position = (1228.8, 554.3) = 20 33 23.29 41 3 59.2
  Extent = 0.6" x 0.5", rotation angle = 168 degrees
  Source counts = 11.1 +/- 3.5
  Background counts = 0.9
  Rate = 0.0004 +/- 0.0001

[Fri Sep 23 09:58:12 2011] Off-axis axis estimate = 5.56'
[Fri Sep 23 10:00:08 2011] Using EEF radius (= 1.42 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:00:08 2011] Initial guess for spatial extent in simple fitting = 1.42"
[Fri Sep 23 10:00:08 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.069
[Fri Sep 23 10:00:08 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 1.42"
[Fri Sep 23 10:00:09 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src33.ximg exists
[Fri Sep 23 10:00:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src33.csv
[Fri Sep 23 10:00:09 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src33_1.ximg exists
[Fri Sep 23 10:00:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src33.csv
[Fri Sep 23 10:00:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:00:10 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Fri Sep 23 10:00:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10971_pi14-548_cl_pass0_tfrozen_src33.csv
[Fri Sep 23 10:00:10 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Sep 23 10:00:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10971_pi14-548_cl_pass0_tfrozen_src33.csv
[Fri Sep 23 10:00:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10971_pi14-548_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10971_pi14-548_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:00:49 2011] Spatial fit model total counts = 39.164200, observed total counts = 44.000000
[Fri Sep 23 10:00:49 2011] Offset between fit and detection position for source 33 = 0.227129 pixels
[Fri Sep 23 10:00:49 2011] 44.065180 total counts/ 37.439100 bgd. counts: snr = 1.082914
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.227129 pixels
  Position = (1228.6, 554.5) = 20 33 23.32 41 3 59.1
  Extent = 0.4" x 0.4", rotation angle = 0
  Source counts = 6.6 +/- 6.6
  Background counts = 37.4
  Rate = 0.0002 +/- 0.0002
  Deleting source due to low Poisson probability