[Fri Sep 23 09:58:05 2011] Detection parameters:
  Position = (256.6, 872.8) = 20 34 5.60 41 6 35.9
  Extent = 1.4" x 1.0", rotation angle = 3 degrees
  Source counts = 116.5 +/- 11.5
  Background counts = 16.5
  Rate = 0.004 +/- 0.0004

[Fri Sep 23 09:58:12 2011] Off-axis axis estimate = 8.00'
[Fri Sep 23 10:00:08 2011] Using EEF radius (= 2.83 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:00:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 10:00:08 2011] Initial guess for spatial extent in simple fitting = 2.83"
[Fri Sep 23 10:00:08 2011] source mask rpix=5.8, npix_max = 156, mask sum = 156, frac = 0.997
[Fri Sep 23 10:00:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.83"
[Fri Sep 23 10:00:08 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 10:00:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 10:00:08 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 10:00:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 10:00:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10971_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:00:09 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 10:00:09 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 10:00:09 2011] Fit fullrun_ccd2_acisf10971_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 10:00:49 2011] Spatial fit model total counts = 164.847000, observed total counts = 163.000000
[Fri Sep 23 10:00:49 2011] Offset between fit and detection position for source 1 = 1.099434 pixels
[Fri Sep 23 10:00:49 2011] 165.077700 total counts/ 53.034700 bgd. counts: snr = 15.385254
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.099434 pixels
  Position = (256.4, 873.9) = 20 34 5.63 41 6 36.2
  Extent = 2.3 (2.0-2.7)", rotation angle = 0
  Source counts = 112.0 +/- 12.8
  Background counts = 53.0
  Rate = 0.004 +/- 0.0004
[Fri Sep 23 10:00:49 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:00:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:00:49 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:00:49 2011] Source does appear to be extended
[Fri Sep 23 10:00:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:01:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:01:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 10:01:39 2011] Initial guess for spatial extent in simple fitting = 2.32"
[Fri Sep 23 10:01:39 2011] source mask rpix=4.7, npix_max = 108, mask sum = 110, frac = 1.010
[Fri Sep 23 10:01:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.32"
[Fri Sep 23 10:01:40 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 10:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10971_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 10:01:40 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 10:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10971_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 10:01:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10971_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10971_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:01:40 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 10:01:40 2011] fullrun_ccd2_acisf10971_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 10:01:40 2011] Fit fullrun_ccd2_acisf10971_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 10:02:11 2011] Spatial fit model total counts = 147.999000, observed total counts = 148.000000
[Fri Sep 23 10:02:11 2011] Offset between fit and detection position for source 1 = 0.279005 pixels
[Fri Sep 23 10:02:11 2011] 147.246800 total counts/ 37.366800 bgd. counts: snr = 17.975281
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.279005 pixels
  Position = (256.6, 873.9) = 20 34 5.62 41 6 36.2
  Extent = 2.3 (1.9-2.7)", rotation angle = 0
  Source counts = 109.9 +/- 12.1
  Background counts = 37.4
  Rate = 0.004 +/- 0.0004
[Fri Sep 23 10:02:11 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:02:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:02:11 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:02:11 2011] Source does appear to be extended
[Fri Sep 23 10:02:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:07:18 2011] Not overwriting source region fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 23 10:07:18 2011] Extracting stamp from image fullrun_ccd2_acisf10971_pi14-548_cl_sm2.00.img.gz, (150, 768) - (363, 980)
[Fri Sep 23 10:07:18 2011] Writing fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1.gif
[Fri Sep 23 10:07:23 2011] ../../acisf10971/products/events/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_src.evt and ../../acisf10971/products/events/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 23 10:07:23 2011] Size of ../../acisf10971/products/events/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_src.evt.gz[events] = 138 counts
[Fri Sep 23 10:07:23 2011] Mean chipx,y = (286.75, 92.43)
[Fri Sep 23 10:07:23 2011] Mean tdetx,y = (3153.43, 3799.25)
[Fri Sep 23 10:07:23 2011] chipx,y range = (263.00-314.00, 67.00-119.00)
[Fri Sep 23 10:07:23 2011] Size of ../../acisf10971/products/events/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 145 counts
[Fri Sep 23 10:07:23 2011] ../../acisf10971/products/images/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_src.img and ../../acisf10971/products/images/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 23 10:07:23 2011] ../../acisf10971/products/spectra/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_src.pi and ../../acisf10971/products/spectra/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 23 10:07:26 2011] ../../acisf10971/products/lightcurves/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_src.lc and ../../acisf10971/products/lightcurves/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 23 10:10:18 2011] Keeping rmf generated by specextract
[Fri Sep 23 10:10:18 2011] 166.427
[Fri Sep 23 10:13:44 2011] Updating aperture counts using extracted products
[Fri Sep 23 10:13:44 2011] Error reading totcts from fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 23 10:13:45 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:13:45 2011] Using photon index=1.80, rate=0.00364, arf fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 10:13:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 10:13:45 2011] Updating source flux to 6.3e-14
[Fri Sep 23 10:14:16 2011] Reading fit data from acisf10971/analysis//spectral/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 23 10:14:16 2011] Spectral fit parameter nH value = 1.35396e+22
[Fri Sep 23 10:14:16 2011] Spectral fit parameter PhoIndex value = 2.5333
[Fri Sep 23 10:14:16 2011] Failed to get F(0.3-8.0) from acisf10971/analysis//spectral/fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 10:14:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:14:16 2011] Using Nh = 1.4e+22, photon index=2.53, rate=0.00364, arf fullrun_ccd2_acisf10971_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 10:14:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 10:14:16 2011] Updating source flux to 5.1e-14