[Fri Sep 23 09:58:00 2011] Detection parameters:
  Position = (838.2, 1066.5) = 20 33 40.55 40 56 23.3
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 14.0 +/- 3.9
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0001

[Fri Sep 23 09:58:05 2011] Off-axis axis estimate = 3.48'
[Fri Sep 23 10:00:05 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:00:05 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Fri Sep 23 10:00:05 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.835
[Fri Sep 23 10:00:05 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.69"
[Fri Sep 23 10:00:07 2011] fullrun_ccd1_acisf10971_pi14-548_cl_pass0_src16.ximg exists
[Fri Sep 23 10:00:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10971_pi14-548_cl_pass0_src16.csv
[Fri Sep 23 10:00:07 2011] fullrun_ccd1_acisf10971_pi14-548_cl_pass0_src16_1.ximg exists
[Fri Sep 23 10:00:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10971_pi14-548_cl_pass0_src16.csv
[Fri Sep 23 10:00:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10971_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10971_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:00:08 2011] fullrun_ccd1_acisf10971_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Fri Sep 23 10:00:08 2011] fullrun_ccd1_acisf10971_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Sep 23 10:00:08 2011] Fit fullrun_ccd1_acisf10971_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Sep 23 10:00:42 2011] Spatial fit model total counts = 17.024300, observed total counts = 17.000000
[Fri Sep 23 10:00:42 2011] Offset between fit and detection position for source 5 = 0.776471 pixels
[Fri Sep 23 10:00:42 2011] 16.872940 total counts/ 2.517540 bgd. counts: snr = 9.047469
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.776471 pixels
  Position = (838.7, 1067.1) = 20 33 40.55 40 56 23.4
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 14.4 +/- 4.1
  Background counts = 2.5
  Rate = 0.0005 +/- 0.0001
[Fri Sep 23 10:00:42 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:00:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:00:42 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:00:42 2011] Source does appear to be extended
[Fri Sep 23 10:00:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:01:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:01:35 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Fri Sep 23 10:01:35 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.950
[Fri Sep 23 10:01:35 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.51"
[Fri Sep 23 10:01:37 2011] fullrun_ccd1_acisf10971_pi14-548_cl_pass1_src16.ximg exists
[Fri Sep 23 10:01:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10971_pi14-548_cl_pass1_src16.csv
[Fri Sep 23 10:01:38 2011] fullrun_ccd1_acisf10971_pi14-548_cl_pass1_src16_1.ximg exists
[Fri Sep 23 10:01:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10971_pi14-548_cl_pass1_src16.csv
[Fri Sep 23 10:01:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10971_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10971_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:01:39 2011] fullrun_ccd1_acisf10971_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Fri Sep 23 10:01:39 2011] fullrun_ccd1_acisf10971_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Sep 23 10:01:39 2011] Fit fullrun_ccd1_acisf10971_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Sep 23 10:02:05 2011] Spatial fit model total counts = 16.723900, observed total counts = 17.000000
[Fri Sep 23 10:02:05 2011] Offset between fit and detection position for source 5 = 0.022566 pixels
[Fri Sep 23 10:02:05 2011] 16.447230 total counts/ 2.412530 bgd. counts: snr = 9.035803
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.022566 pixels
  Position = (838.7, 1067.1) = 20 33 40.55 40 56 23.4
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 14.0 +/- 4.1
  Background counts = 2.4
  Rate = 0.0005 +/- 0.0001
[Fri Sep 23 10:02:05 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:02:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:02:05 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:02:05 2011] Source does appear to be extended
[Fri Sep 23 10:02:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:05:13 2011] Not overwriting source region fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5_src.reg
[Fri Sep 23 10:05:13 2011] Extracting stamp from image fullrun_ccd1_acisf10971_pi14-548_cl_sm2.00.img.gz, (816, 1044) - (862, 1090)
[Fri Sep 23 10:05:13 2011] Writing fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5.gif
[Fri Sep 23 10:06:11 2011] ../../acisf10971/products/events/fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5_src.evt and ../../acisf10971/products/events/fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Sep 23 10:06:11 2011] Size of ../../acisf10971/products/events/fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5_src.evt.gz[events] = 15 counts
[Fri Sep 23 10:06:11 2011] Mean chipx,y = (159.60, 687.40)
[Fri Sep 23 10:06:11 2011] Mean tdetx,y = (4444.60, 4266.60)
[Fri Sep 23 10:06:11 2011] chipx,y range = (145.00-179.00, 672.00-704.00)
[Fri Sep 23 10:06:11 2011] Size of ../../acisf10971/products/events/fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 8 counts
[Fri Sep 23 10:06:11 2011] ../../acisf10971/products/images/fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5_src.img and ../../acisf10971/products/images/fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Sep 23 10:06:11 2011] ../../acisf10971/products/spectra/fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5_src.pi and ../../acisf10971/products/spectra/fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Sep 23 10:06:11 2011] Not generating rmf since there are only 14 counts
[Fri Sep 23 10:06:16 2011] ../../acisf10971/products/lightcurves/fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5_src.lc and ../../acisf10971/products/lightcurves/fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Sep 23 10:07:18 2011] 198.876
[Fri Sep 23 10:13:43 2011] Updating aperture counts using extracted products
[Fri Sep 23 10:13:43 2011] Error reading totcts from fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Sep 23 10:13:44 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:13:44 2011] Using photon index=1.80, rate=0.000464, arf fullrun_ccd1_acisf10971_pi14-548_pass1_cl_src5.arf
[Fri Sep 23 10:13:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 10:13:44 2011] Updating source flux to 7e-15
[Fri Sep 23 10:14:02 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting