[Fri Sep 23 09:57:56 2011] Detection parameters:
  Position = (1312.4, 699.2) = 20 33 52.27 40 59 13.4
  Extent = 0.5" x 0.5", rotation angle = 176 degrees
  Source counts = 38.0 +/- 6.2
  Background counts = 1.0
  Rate = 0.001 +/- 0.0002

[Fri Sep 23 09:57:59 2011] Off-axis axis estimate = 1.87'
[Fri Sep 23 09:59:59 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 09:59:59 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Sep 23 09:59:59 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.235
[Fri Sep 23 09:59:59 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.42"
[Fri Sep 23 09:59:59 2011] fullrun_ccd0_acisf10971_pi14-548_cl_pass0_src13.ximg exists
[Fri Sep 23 09:59:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10971_pi14-548_cl_pass0_src13.csv
[Fri Sep 23 09:59:59 2011] fullrun_ccd0_acisf10971_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Sep 23 09:59:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10971_pi14-548_cl_pass0_src13.csv
[Fri Sep 23 09:59:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10971_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10971_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:00:01 2011] fullrun_ccd0_acisf10971_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Sep 23 10:00:01 2011] fullrun_ccd0_acisf10971_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Sep 23 10:00:01 2011] Fit fullrun_ccd0_acisf10971_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Sep 23 10:00:38 2011] Spatial fit model total counts = 42.999900, observed total counts = 43.000000
[Fri Sep 23 10:00:38 2011] Offset between fit and detection position for source 13 = 0.765144 pixels
[Fri Sep 23 10:00:38 2011] 43.134790 total counts/ 5.312090 bgd. counts: snr = 16.410425
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.765144 pixels
  Position = (1312.9, 699.7) = 20 33 52.27 40 59 13.4
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 37.8 +/- 6.6
  Background counts = 5.3
  Rate = 0.001 +/- 0.0002
[Fri Sep 23 10:00:38 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:00:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:00:38 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:00:38 2011] Source does appear to be extended
[Fri Sep 23 10:00:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:01:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:01:34 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Sep 23 10:01:34 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.752
[Fri Sep 23 10:01:34 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.45"
[Fri Sep 23 10:01:35 2011] fullrun_ccd0_acisf10971_pi14-548_cl_pass1_src13.ximg exists
[Fri Sep 23 10:01:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10971_pi14-548_cl_pass1_src13.csv
[Fri Sep 23 10:01:35 2011] fullrun_ccd0_acisf10971_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Sep 23 10:01:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10971_pi14-548_cl_pass1_src13.csv
[Fri Sep 23 10:01:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10971_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10971_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:01:35 2011] fullrun_ccd0_acisf10971_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Sep 23 10:01:35 2011] fullrun_ccd0_acisf10971_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Sep 23 10:01:35 2011] Fit fullrun_ccd0_acisf10971_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Sep 23 10:02:01 2011] Spatial fit model total counts = 42.892300, observed total counts = 43.000000
[Fri Sep 23 10:02:01 2011] Offset between fit and detection position for source 13 = 0.012138 pixels
[Fri Sep 23 10:02:01 2011] 42.453080 total counts/ 4.741580 bgd. counts: snr = 17.318579
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.012138 pixels
  Position = (1313.0, 699.7) = 20 33 52.27 40 59 13.4
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 37.7 +/- 6.5
  Background counts = 4.7
  Rate = 0.001 +/- 0.0002
[Fri Sep 23 10:02:01 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:02:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:02:01 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:02:01 2011] Source does appear to be extended
[Fri Sep 23 10:02:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:02:51 2011] Not overwriting source region fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13_src.reg
[Fri Sep 23 10:02:51 2011] Extracting stamp from image fullrun_ccd0_acisf10971_pi14-548_cl_sm2.00.img.gz, (1293, 679) - (1333, 720)
[Fri Sep 23 10:02:51 2011] Writing fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13.gif
[Fri Sep 23 10:03:39 2011] ../../acisf10971/products/events/fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13_src.evt and ../../acisf10971/products/events/fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Fri Sep 23 10:03:39 2011] Size of ../../acisf10971/products/events/fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13_src.evt.gz[events] = 39 counts
[Fri Sep 23 10:03:39 2011] Mean chipx,y = (914.54, 947.69)
[Fri Sep 23 10:03:39 2011] Mean tdetx,y = (4008.69, 4217.46)
[Fri Sep 23 10:03:39 2011] chipx,y range = (898.00-931.00, 931.00-965.00)
[Fri Sep 23 10:03:39 2011] Size of ../../acisf10971/products/events/fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 5 counts
[Fri Sep 23 10:03:39 2011] ../../acisf10971/products/images/fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13_src.img and ../../acisf10971/products/images/fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Fri Sep 23 10:03:39 2011] ../../acisf10971/products/spectra/fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13_src.pi and ../../acisf10971/products/spectra/fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Fri Sep 23 10:03:39 2011] Not generating rmf since there are only 37 counts
[Fri Sep 23 10:03:42 2011] ../../acisf10971/products/lightcurves/fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13_src.lc and ../../acisf10971/products/lightcurves/fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Fri Sep 23 10:05:12 2011] 196.065
[Fri Sep 23 10:13:42 2011] Updating aperture counts using extracted products
[Fri Sep 23 10:13:42 2011] Error reading totcts from fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13_src.pi.gz
[Fri Sep 23 10:13:43 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 10:13:43 2011] Using photon index=1.80, rate=0.00125, arf fullrun_ccd0_acisf10971_pi14-548_pass1_cl_src13.arf
[Fri Sep 23 10:13:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 10:13:43 2011] Updating source flux to 1.9e-14
[Fri Sep 23 10:13:53 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting