[Thu Sep 29 22:23:41 2011] Detection parameters:
  Position = (88.8, 695.1) = 20 33 3.07 40 55 45.4
  Extent = 0.6" x 0.5", rotation angle = 117 degrees
  Source counts = 16.1 +/- 4.2
  Background counts = 1.9
  Rate = 0.0005 +/- 0.0001

[Thu Sep 29 22:23:44 2011] Off-axis axis estimate = 0.57'
[Thu Sep 29 22:26:20 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 22:26:20 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Thu Sep 29 22:26:20 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.899
[Thu Sep 29 22:26:20 2011] Giving source the simple spatial ID 74 for pass 0, mean size = 0.39"
[Thu Sep 29 22:26:44 2011] fullrun_ccd3_acisf10970_pi14-548_cl_pass0_src74.ximg exists
[Thu Sep 29 22:26:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10970_pi14-548_cl_pass0_src74.csv
[Thu Sep 29 22:26:44 2011] fullrun_ccd3_acisf10970_pi14-548_cl_pass0_src74_1.ximg exists
[Thu Sep 29 22:26:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10970_pi14-548_cl_pass0_src74.csv
[Thu Sep 29 22:26:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10970_pi14-548_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10970_pi14-548_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 22:27:04 2011] fullrun_ccd3_acisf10970_pi14-548_cl_pass0_tfrozen_src74.ximg exists
[Thu Sep 29 22:27:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10970_pi14-548_cl_pass0_tfrozen_src74.csv
[Thu Sep 29 22:27:04 2011] fullrun_ccd3_acisf10970_pi14-548_cl_pass0_tfrozen_src74_1.ximg exists
[Thu Sep 29 22:27:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10970_pi14-548_cl_pass0_tfrozen_src74.csv
[Thu Sep 29 22:27:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10970_pi14-548_cl_pass0_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10970_pi14-548_cl_pass0_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 22:27:36 2011] Spatial fit model total counts = 17.001800, observed total counts = 19.000000
[Thu Sep 29 22:27:36 2011] Offset between fit and detection position for source 64 = 0.898349 pixels
[Thu Sep 29 22:27:36 2011] 17.028950 total counts/ 1.538950 bgd. counts: snr = 12.486455
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 0.898349 pixels
  Position = (89.7, 695.1) = 20 33 3.05 40 55 45.2
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 15.5 +/- 4.1
  Background counts = 1.5
  Rate = 0.0005 +/- 0.0001
[Thu Sep 29 22:27:37 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 22:27:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 22:27:37 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 22:27:37 2011] Source does appear to be extended
[Thu Sep 29 22:27:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 22:27:37 2011] Deleting source due to low Poisson probability 0.7