[Thu Sep 29 22:23:33 2011] Detection parameters:
  Position = (695.5, 1090.5) = 20 33 10.69 41 4 40.4
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 15.5 +/- 5.3
  Background counts = 12.5
  Rate = 0.0005 +/- 0.0002

[Thu Sep 29 22:23:34 2011] Off-axis axis estimate = 8.57'
[Thu Sep 29 22:26:14 2011] Using EEF radius (= 3.25 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 22:26:14 2011] Initial guess for spatial extent in simple fitting = 3.25"
[Thu Sep 29 22:26:14 2011] source mask rpix=6.6, npix_max = 201, mask sum = 185, frac = 0.918
[Thu Sep 29 22:26:14 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 3.25"
[Thu Sep 29 22:26:17 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass0_src26.ximg exists
[Thu Sep 29 22:26:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10970_pi14-548_cl_pass0_src26.csv
[Thu Sep 29 22:26:17 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass0_src26_1.ximg exists
[Thu Sep 29 22:26:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10970_pi14-548_cl_pass0_src26.csv
[Thu Sep 29 22:26:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10970_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10970_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 22:26:19 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Thu Sep 29 22:26:19 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Sep 29 22:26:19 2011] Fit fullrun_ccd2_acisf10970_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Thu Sep 29 22:27:24 2011] Spatial fit model total counts = 61.514400, observed total counts = 66.000000
[Thu Sep 29 22:27:24 2011] Offset between fit and detection position for source 35 = 1.283288 pixels
[Thu Sep 29 22:27:24 2011] 61.395800 total counts/ 36.550400 bgd. counts: snr = 4.109604
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 1.283288 pixels
  Position = (694.3, 1091.1) = 20 33 10.77 41 4 40.5
  Extent = 1.5 (0.8-2.1)", rotation angle = 0
  Source counts = 24.8 +/- 7.8
  Background counts = 36.6
  Rate = 0.0008 +/- 0.0003
[Thu Sep 29 22:27:25 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 22:27:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 22:27:25 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 22:27:25 2011] Source does appear to be extended
[Thu Sep 29 22:27:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 22:28:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 22:28:15 2011] Initial guess for spatial extent in simple fitting = 1.51"
[Thu Sep 29 22:28:15 2011] source mask rpix=3.1, npix_max = 50, mask sum = 39, frac = 0.767
[Thu Sep 29 22:28:15 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 1.51"
[Thu Sep 29 22:28:18 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass1_src26.ximg exists
[Thu Sep 29 22:28:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10970_pi14-548_cl_pass1_src26.csv
[Thu Sep 29 22:28:18 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass1_src26_1.ximg exists
[Thu Sep 29 22:28:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10970_pi14-548_cl_pass1_src26.csv
[Thu Sep 29 22:28:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10970_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10970_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 22:28:19 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Thu Sep 29 22:28:19 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Sep 29 22:28:19 2011] Fit fullrun_ccd2_acisf10970_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Thu Sep 29 22:29:05 2011] Spatial fit model total counts = 36.235500, observed total counts = 36.000000
[Thu Sep 29 22:29:05 2011] Offset between fit and detection position for source 35 = 1.543349 pixels
[Thu Sep 29 22:29:05 2011] 36.781200 total counts/ 19.419900 bgd. counts: snr = 3.939660
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 1.543349 pixels
  Position = (695.4, 1089.9) = 20 33 10.72 41 4 39.9
  Extent = 0.7 (0.4-1.0)", rotation angle = 0
  Source counts = 17.4 +/- 6.1
  Background counts = 19.4
  Rate = 0.0006 +/- 0.0002
[Thu Sep 29 22:29:05 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 22:29:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 22:29:05 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 22:29:05 2011] Source does appear to be extended
[Thu Sep 29 22:29:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 22:33:07 2011] Not overwriting source region fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35_src.reg
[Thu Sep 29 22:33:07 2011] Extracting stamp from image fullrun_ccd2_acisf10970_pi14-548_cl_sm2.00.img.gz, (663, 1057) - (728, 1122)
[Thu Sep 29 22:33:07 2011] Writing fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35.gif
[Thu Sep 29 22:35:53 2011] ../../acisf10970/products/events/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35_src.evt and ../../acisf10970/products/events/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35_bgd.evt exist, delete to re-create
[Thu Sep 29 22:35:53 2011] Size of ../../acisf10970/products/events/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35_src.evt.gz[events] = 23 counts
[Thu Sep 29 22:35:53 2011] Mean chipx,y = (774.65, 255.35)
[Thu Sep 29 22:35:53 2011] Mean tdetx,y = (3316.35, 3311.35)
[Thu Sep 29 22:35:53 2011] chipx,y range = (756.00-789.00, 241.00-271.00)
[Thu Sep 29 22:35:53 2011] Size of ../../acisf10970/products/events/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 33 counts
[Thu Sep 29 22:35:53 2011] ../../acisf10970/products/images/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35_src.img and ../../acisf10970/products/images/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35_bgd.img exist, delete to re-create
[Thu Sep 29 22:35:53 2011] ../../acisf10970/products/spectra/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35_src.pi and ../../acisf10970/products/spectra/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35_bgd.pi exist, delete to re-create
[Thu Sep 29 22:35:53 2011] Not generating rmf since there are only 17 counts
[Thu Sep 29 22:35:58 2011] ../../acisf10970/products/lightcurves/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35_src.lc and ../../acisf10970/products/lightcurves/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35_bgd.lc exist, delete to re-create
[Thu Sep 29 22:37:26 2011] 154.411
[Thu Sep 29 22:42:24 2011] Updating aperture counts using extracted products
[Thu Sep 29 22:42:24 2011] Error reading totcts from fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35_src.pi.gz
[Thu Sep 29 22:42:25 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 22:42:25 2011] Using photon index=1.80, rate=0.000588, arf fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src35.arf
[Thu Sep 29 22:42:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 22:42:25 2011] Updating source flux to 1.1e-14
[Thu Sep 29 22:42:44 2011] Source 35 has fewer than 100.000000 counts, skipping spectral fitting