[Thu Sep 29 22:23:32 2011] Detection parameters:
  Position = (777.7, 871.8) = 20 33 7.12 41 2 52.9
  Extent = 1.8" x 1.3", rotation angle = 5 degrees
  Source counts = 36.2 +/- 6.6
  Background counts = 7.8
  Rate = 0.001 +/- 0.0002

[Thu Sep 29 22:23:34 2011] Off-axis axis estimate = 6.72'
[Thu Sep 29 22:26:14 2011] Using EEF radius (= 2.02 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 22:26:14 2011] Initial guess for spatial extent in simple fitting = 2.02"
[Thu Sep 29 22:26:14 2011] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.956
[Thu Sep 29 22:26:14 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 2.02"
[Thu Sep 29 22:26:16 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass0_src11.ximg exists
[Thu Sep 29 22:26:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10970_pi14-548_cl_pass0_src11.csv
[Thu Sep 29 22:26:16 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass0_src11_1.ximg exists
[Thu Sep 29 22:26:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10970_pi14-548_cl_pass0_src11.csv
[Thu Sep 29 22:26:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10970_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10970_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 22:26:19 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Thu Sep 29 22:26:19 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Sep 29 22:26:19 2011] Fit fullrun_ccd2_acisf10970_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Sep 29 22:27:24 2011] Spatial fit model total counts = 45.298700, observed total counts = 45.000000
[Thu Sep 29 22:27:24 2011] Offset between fit and detection position for source 32 = 0.978543 pixels
[Thu Sep 29 22:27:24 2011] 45.360790 total counts/ 8.792290 bgd. counts: snr = 12.332643
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.978543 pixels
  Position = (778.2, 872.6) = 20 33 7.11 41 2 53.0
  Extent = 1.7 (1.0-2.4)", rotation angle = 0
  Source counts = 36.6 +/- 6.7
  Background counts = 8.8
  Rate = 0.001 +/- 0.0002
[Thu Sep 29 22:27:25 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 22:27:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 22:27:25 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 22:27:25 2011] Source does appear to be extended
[Thu Sep 29 22:27:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 22:28:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 22:28:15 2011] Initial guess for spatial extent in simple fitting = 1.72"
[Thu Sep 29 22:28:15 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.003
[Thu Sep 29 22:28:15 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 1.72"
[Thu Sep 29 22:28:16 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass1_src11.ximg exists
[Thu Sep 29 22:28:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10970_pi14-548_cl_pass1_src11.csv
[Thu Sep 29 22:28:16 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass1_src11_1.ximg exists
[Thu Sep 29 22:28:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10970_pi14-548_cl_pass1_src11.csv
[Thu Sep 29 22:28:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10970_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10970_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 22:28:19 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Thu Sep 29 22:28:19 2011] fullrun_ccd2_acisf10970_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Sep 29 22:28:19 2011] Fit fullrun_ccd2_acisf10970_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Sep 29 22:29:05 2011] Spatial fit model total counts = 43.540100, observed total counts = 43.000000
[Thu Sep 29 22:29:05 2011] Offset between fit and detection position for source 32 = 0.525071 pixels
[Thu Sep 29 22:29:05 2011] 43.935100 total counts/ 16.459400 bgd. counts: snr = 6.772387
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.525071 pixels
  Position = (777.7, 872.8) = 20 33 7.14 41 2 53.1
  Extent = 1.3 (0.8-2.3)", rotation angle = 0
  Source counts = 27.5 +/- 6.6
  Background counts = 16.5
  Rate = 0.0009 +/- 0.0002
[Thu Sep 29 22:29:05 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 22:29:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 22:29:05 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 22:29:05 2011] Source does appear to be extended
[Thu Sep 29 22:29:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 22:33:06 2011] Not overwriting source region fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32_src.reg
[Thu Sep 29 22:33:06 2011] Extracting stamp from image fullrun_ccd2_acisf10970_pi14-548_cl_sm2.00.img.gz, (719, 814) - (837, 932)
[Thu Sep 29 22:33:07 2011] Writing fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32.gif
[Thu Sep 29 22:34:32 2011] ../../acisf10970/products/events/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32_src.evt and ../../acisf10970/products/events/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32_bgd.evt exist, delete to re-create
[Thu Sep 29 22:34:32 2011] Size of ../../acisf10970/products/events/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32_src.evt.gz[events] = 42 counts
[Thu Sep 29 22:34:32 2011] Mean chipx,y = (663.55, 463.17)
[Thu Sep 29 22:34:32 2011] Mean tdetx,y = (3524.17, 3422.45)
[Thu Sep 29 22:34:32 2011] chipx,y range = (641.00-685.00, 439.00-484.00)
[Thu Sep 29 22:34:32 2011] Size of ../../acisf10970/products/events/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32_bgd.evt.gz[events] = 64 counts
[Thu Sep 29 22:34:32 2011] ../../acisf10970/products/images/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32_src.img and ../../acisf10970/products/images/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32_bgd.img exist, delete to re-create
[Thu Sep 29 22:34:32 2011] ../../acisf10970/products/spectra/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32_src.pi and ../../acisf10970/products/spectra/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32_bgd.pi exist, delete to re-create
[Thu Sep 29 22:34:32 2011] Not generating rmf since there are only 27 counts
[Thu Sep 29 22:34:36 2011] ../../acisf10970/products/lightcurves/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32_src.lc and ../../acisf10970/products/lightcurves/fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32_bgd.lc exist, delete to re-create
[Thu Sep 29 22:37:26 2011] 166.464
[Thu Sep 29 22:42:24 2011] Updating aperture counts using extracted products
[Thu Sep 29 22:42:24 2011] Error reading totcts from fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32_src.pi.gz
[Thu Sep 29 22:42:25 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 22:42:25 2011] Using photon index=1.80, rate=0.000931, arf fullrun_ccd2_acisf10970_pi14-548_pass1_cl_src32.arf
[Thu Sep 29 22:42:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 22:42:25 2011] Updating source flux to 1.7e-14
[Thu Sep 29 22:42:44 2011] Source 32 has fewer than 100.000000 counts, skipping spectral fitting