[Thu Sep 29 22:23:29 2011] Detection parameters:
  Position = (790.2, 448.1) = 20 33 2.93 40 47 25.6
  Extent = 2.8" x 2.1", rotation angle = 45 degrees
  Source counts = 1720.8 +/- 43.1
  Background counts = 134.2
  Rate = 0.06 +/- 0.001

[Thu Sep 29 22:23:29 2011] Off-axis axis estimate = 8.75'
[Thu Sep 29 22:26:05 2011] Using EEF radius (= 3.38 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 22:26:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 22:26:05 2011] Initial guess for spatial extent in simple fitting = 3.38"
[Thu Sep 29 22:26:05 2011] source mask rpix=6.9, npix_max = 217, mask sum = 210, frac = 0.965
[Thu Sep 29 22:26:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.38"
[Thu Sep 29 22:26:11 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 29 22:26:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10970_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 22:26:12 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 29 22:26:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10970_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 22:26:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10970_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10970_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 22:26:13 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 22:26:13 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 22:26:13 2011] Fit fullrun_ccd1_acisf10970_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 22:27:18 2011] Spatial fit model total counts = 1868.260000, observed total counts = 1872.000000
[Thu Sep 29 22:27:18 2011] Offset between fit and detection position for source 26 = 0.656713 pixels
[Thu Sep 29 22:27:18 2011] 1869.486000 total counts/ 193.066000 bgd. counts: snr = 120.650724
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.656713 pixels
  Position = (790.8, 448.3) = 20 33 2.92 40 47 25.4
  Extent = 2.7 (2.6-2.8)", rotation angle = 0
  Source counts = 1676.4 +/- 43.2
  Background counts = 193.1
  Rate = 0.06 +/- 0.001
[Thu Sep 29 22:27:18 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 22:27:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 22:27:18 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 22:27:18 2011] Source does appear to be extended
[Thu Sep 29 22:27:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 22:28:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 22:28:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 22:28:13 2011] Initial guess for spatial extent in simple fitting = 2.73"
[Thu Sep 29 22:28:13 2011] source mask rpix=5.5, npix_max = 146, mask sum = 144, frac = 0.986
[Thu Sep 29 22:28:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.73"
[Thu Sep 29 22:28:13 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 29 22:28:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10970_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 22:28:14 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 29 22:28:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10970_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 22:28:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10970_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10970_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 22:28:14 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 22:28:14 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 22:28:14 2011] Fit fullrun_ccd1_acisf10970_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 22:28:59 2011] Warning, spatial fit 1 centroid is now closest to src. 16
[Thu Sep 29 22:28:59 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 22:28:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 22:28:59 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 22:28:59 2011] Source does appear to be extended
[Thu Sep 29 22:28:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 22:31:33 2011] Not overwriting source region fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_src.reg
[Thu Sep 29 22:31:33 2011] Extracting stamp from image fullrun_ccd1_acisf10970_pi14-548_cl_sm2.00.img.gz, (666, 324) - (916, 573)
[Thu Sep 29 22:31:33 2011] Writing fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26.gif
[Thu Sep 29 22:31:34 2011] ../../acisf10970/products/events/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_src.evt and ../../acisf10970/products/events/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Thu Sep 29 22:31:34 2011] Size of ../../acisf10970/products/events/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_src.evt.gz[events] = 1805 counts
[Thu Sep 29 22:31:34 2011] Mean chipx,y = (662.45, 275.66)
[Thu Sep 29 22:31:34 2011] Mean tdetx,y = (4856.34, 4769.45)
[Thu Sep 29 22:31:34 2011] chipx,y range = (628.00-700.00, 241.00-309.00)
[Thu Sep 29 22:31:34 2011] Size of ../../acisf10970/products/events/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 343 counts
[Thu Sep 29 22:31:34 2011] ../../acisf10970/products/images/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_src.img and ../../acisf10970/products/images/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Thu Sep 29 22:31:34 2011] ../../acisf10970/products/spectra/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_src.pi and ../../acisf10970/products/spectra/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Thu Sep 29 22:31:40 2011] ../../acisf10970/products/lightcurves/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_src.lc and ../../acisf10970/products/lightcurves/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Thu Sep 29 22:33:04 2011] Keeping rmf generated by specextract
[Thu Sep 29 22:33:04 2011] 171.329
[Thu Sep 29 22:42:23 2011] Updating aperture counts using extracted products
[Thu Sep 29 22:42:23 2011] Error reading totcts from fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_src.pi.gz
[Thu Sep 29 22:42:23 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 22:42:23 2011] Using photon index=1.80, rate=0.0568, arf fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26.arf
[Thu Sep 29 22:42:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 22:42:23 2011] Updating source flux to 9.7e-13
[Thu Sep 29 22:42:44 2011] Reading fit data from acisf10970/analysis//spectral/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_pl.csv
[Thu Sep 29 22:42:44 2011] Spectral fit parameter nH value = 1.37727e+22
[Thu Sep 29 22:42:44 2011] Spectral fit parameter PhoIndex value = 3.45406
[Thu Sep 29 22:42:44 2011] Failed to get F(0.3-8.0) from acisf10970/analysis//spectral/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26_pl.csv, possibly due to different flux energy range selected
[Thu Sep 29 22:42:44 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 22:42:44 2011] Using Nh = 1.4e+22, photon index=3.45, rate=0.0568, arf fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src26.arf
[Thu Sep 29 22:42:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 22:42:44 2011] Updating source flux to 5.8e-13